Scribd Logo
Upload

Welcome to Scribd!

  • 88 views

    Touchwood Woodorite Primer PDF

    Uploaded by

    muthukumar
    1) Touchwood Woodorite Primer is an alkyd-based primer formulated to protect wood and similar substrates. It seals and fills wood pores to prevent moisture absorption and swelling. 2) It penetrates wood fibers to provide excellent adhesion for undercoats and topcoats, while also protecting finish coats from resinous matter oozing from the wood. 3) The primer can be applied by brush, roller, or spray and dries to a matt finish within 12 hours at 30°C. It requires light sanding and cleaning of surfaces before two coats are applied.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd

    Touchwood Woodorite Primer PDF

    Uploaded by

    muthukumar
    88 views2 pages
    1) Touchwood Woodorite Primer is an alkyd-based primer formulated to protect wood and similar substrates. It seals and fills wood pores to prevent moisture absorption and swelling. 2) It penetrates wood fibers to provide excellent adhesion for undercoats and topcoats, while also protecting finish coats from resinous matter oozing from the wood. 3) The primer can be applied by brush, roller, or spray and dries to a matt finish within 12 hours at 30°C. It requires light sanding and cleaning of surfaces before two coats are applied.

    Original Title

    Touchwood Woodorite Primer.pdf

    Copyright

    © © All Rights Reserved

    Available Formats

    PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    1) Touchwood Woodorite Primer is an alkyd-based primer formulated to protect wood and similar substrates. It seals and fills wood pores to prevent moisture absorption and swelling. 2) It penetrates wood fibers to provide excellent adhesion for undercoats and topcoats, while also protecting finish coats from resinous matter oozing from the wood. 3) The primer can be applied by brush, roller, or spray and dries to a matt finish within 12 hours at 30°C. It requires light sanding and cleaning of surfaces before two coats are applied.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    88 views2 pages

    Touchwood Woodorite Primer PDF

    Uploaded by

    muthukumar
    1) Touchwood Woodorite Primer is an alkyd-based primer formulated to protect wood and similar substrates. It seals and fills wood pores to prevent moisture absorption and swelling. 2) It penetrates wood fibers to provide excellent adhesion for undercoats and topcoats, while also protecting finish coats from resinous matter oozing from the wood. 3) The primer can be applied by brush, roller, or spray and dries to a matt finish within 12 hours at 30°C. It requires light sanding and cleaning of surfaces before two coats are applied.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    of 2

    TECHNICAL DATA

    ARCHITECTURAL COATINGS

    TOUCHWOOD
    www.asianpaints.com/oman Woodorite Primer
    PRODUCT DESCRIPTION
    BERGER Touchwood Woodorite Primer is a specially formulated alkyd based primer to protect wood and similar
    substrate. It has excellent sealing and filling properties, which protects wood from swelling due to absorption of moisture.
    It penetrates into wood fiber and gives excellent adhesion to substrate and also serves as a sound base for the application of
    undercoats and finishing coats. It also protects the finish coat from exudation of resinous matter oozing out from wood.

    RECOMMENDED AREAS OF APPLICATION


    Wood and similar substrate.

    TECHNICAL DATA
    Shade / Colour Range : White
    Finish : Matt
    Composition Nominal : Alkyd Resin
    Specific gravity : 1.40 0.03
    % Volume Solids : 47 2
    Viscosity of supply : 160 - 180 sec at 30C by Ford Cup B4.

    Pack Size : 1 LTR, 1 USG, 5 USG


    Theoretical Coverage Capacity : 12.8 - 14 Sqm. / ltr. @ 35 DFT
    Practical coverage : Practical coverage may depend on surface profile, method of application and weather conditions.

    Surface dry Touch dry Recoatability Hard dry


    Drying time at 30C :
    35 - 45 min. 1 - 2 hrs. 6 hrs. 12 hrs.

    APPLICATION DATA

    Method of Application : Brush, Roller, Spray


    Thinner : Solvalux 7 - 9
    Thinning ratio (by vol.) : Brush or Roller : as such or upto 5%
    Spray : 10 - 15%

    SURFACE PREPARATION
    In case of grease / oil contamination use Solvalux 7 - 9 for cleaning the surface before sanding with suitable abrasive paper.

    For larger area wire brush can be used for removal of old paint.

    For old and strongly adhered paint film BERGER Quick Paint Remover should be used for stripping the paint.
    APPLICATIONS DETAILS
    On the prepared surface, apply Touchwood Wood Primer after thinning to adjust viscosity.

    Apply two coats by convenient method of application, keeping in mind the drying time between coats.

    RECOMMENDED PAINT SYSTEM


    One coat x Berger Touchwood Woodorite Primer
    One coat x Berger Universal Undercoat
    Two coats x Berger Premium Enamel / Berger Decora Enamel

    * For detailed system recommendation based on specific requirements please contact Berger representative.

    STORAGE, SAFETY INFORMATION AND PRECAUTIONS


    Flammability and Transport Information:
    Highly flammable, Dangerous goods class, Flash point 32C, UN 1263, PG III

    Safety information and precautions:


    Do not apply at temperature below 10C.
    Do not over thin.
    Provide adequate ventilation during use
    Keep out of reach of children.
    Avoid contact with skin and eye, wear suitable Personal Protective Equipments such as overalls, goggles, dust masks
    and gloves.

    DISCLAIMER
    The information provided in this data sheet is not intended to be complete. It is the responsibility of the user to ensure that the product used is suitable for the purpose it is meant to serve.
    In view of various factors affecting the performance of the coating, we cannot assume responsibility for the product performance, nor do we accept any liability arising from use of this
    product, unless specifcally agreed to in writing by us. The information provided in the datasheet may be modifed by us without notice.

    This Technical Data Sheet supersedes those previously issued with immediate effect.

    BAHRAIN: + 973-17-730700 OMAN: + 968-24596709 UAE: +971-4-3391000

    Version: 02/2007

    You might also like