URL http://www.jsw.co.

jp/
Division Gate City Ohsaki-West Tower, 11-1, Osaki 1-chome, Shinagawa-ku,
Head Quarter: Tokyo 141-0032, Japan
Phone: +81-3-5745-2081 Fax: +81-3-5745-208384
URL http://www.jsw.co.jp/inj_f/inj_index.htm
JSW Plastics Machinery Inc.
Head Office: 555 South Promenade Ave., Unit 104, Corona, California 92879, U.S.A.
Phone: +1-951-898-0934 Fax: +1-951-898-0944
Chicago Office: 540 Capital Drive, Suite 130, Lake Zurich, Illinois 60047,U.S.A.
Phone: +1-847-550-0704 Fax: +1-847-550-0725 Electric Servo Drive
Detroit Office: 24301 Catherine Industrial Drive, Unit 118, Novi, Michigan 48375, U.S.A.
Phone: +1-248-449-5422 Fax: +1-248-449-6018 Injection Molding Machine
JSW Plastics Machinery (S) Pte Ltd
Head Office: 17, Gul Lane, Jurong Town, Singapore 629413, Republic of Singapore
Phone: +65-68614511 Fax: +65-68623166
Philippine Office: Chemdis Bldg., Don Jesus Blvd., Alabang Hills Village, Muntinlupa City,
Philippines
Phone: +63-2-809-8982 Fax: +63-2-809-6221
Indonesia Office: Graha Cevril, Jl. Senopati Raya No.6A, Jakarta 12110, Indonesia
Phone: +62-21-725-7486 Fax: +62-21-725-7865

JSW Plastics Machinery (M) SDN. BHD.

D6-5-G,(Ground Floor), Block D6, Pusat Perdagangan Dana 1,
Jalan Pju 1A/46, 47301, Petaling Jaya,
Selangor Darul Ehsan, Malaysia
Phone: +60-3-78426076 Fax: +60-3-78426078

JSW Plastics Machinery (T) Co., Ltd.

78/6 JST Building 4th Fl., Moo 7 King Kaew Road, Rachatewa,
Bangplee, Samutprakarn 10540 Thailand
Phone: +66-2-738-5272 Fax: +66-2-738-5277

JSW Plastics Machinery Vietnam Ltd.

Room103, Techno-Center Thang Long Industrial Park Dong Anh District,
Hanoi, Viet Nam
Phone: +84-4-3951-6383 Fax: +84-4-3951-6384

JSW Plastics Machinery (H.K.) Co., Ltd.

Room 907, Corporation Park, 11 On Lai Street, Shatin N.T., Hong Kong
Phone: +852-2648-0720 Fax: +852-2686-8204

JSW Injection Machine Maintenance

(Shenzhen) Co., Ltd.
1/F., Block A, Sanhe Industrial Park,Yongxin Street,Yingrenshi Village,
,
Shiyan Town, Baoan District, Shenzhen, 518108, People s Republic of China
Phone: +86-755-8602-0930 Fax: +86-755-8602-0934

JSW Plastics Machinery (Shanghai) Corp.

28A, Strength Plaza, No.600-4, Tianshan Road, Shanghai, 200051,
,
People s Republic of China
Phone: +86-21-5206-7031 Fax: +86-21-5206-7033
model J550AD J1000AD
JSW Plastics Machinery (TAIWAN) Corp.
Head Office: 1F., No.23, Da Hu 1st Rd., Guishan Shiang, Taoyuan, Taiwan, R.O.C. J650AD J1300AD
Phone: +886-3-396-2102 Fax: +886-3-396-2104
Tainan Office: 15F-7, No.689-78, Shiau E. Rd., Yungkang City Tainan, Taiwan, R.O.C.
J850AD J1800AD
Phone: +886-6-311-4192 Fax: +886-6-311-4193 J850ADW

Printed in JapanHO.AB. JG. AE. C

Large Electric Servo Drive Injection Molding Machines
Promotes Faster Cycles, Energy Sa vings, and High Performance
An industry pioneer, JSW has extensive experience in manufacturing large electric molding mac hines.
The newly released, second-generation large electric servo drive molding machine promises to deliver measurable improvements in productivity, quality, and economy.
This latest improvement retains our time proven toggle clamping unit, which for many years has delivered "faster cycle times" and "unparalleled energy savings."

AD Series Large Size Electric Servo Drive Injection Molding Machine Providing Increased Productivity
Productivity Environment Stability
Increased Platen Speed Reduced Power Consumption SYSCOM3000 IWCS Control
Reduced Dry Cycle Reduced CO2 Emissions Fast Servo Control Circuit Clamp Force Feedback Control
Improved Plasticizing Capability Power Supply Regenerating Function HAVC Control Injection Compression Molding
Extra Rigid Clamping Unit Reduced Cooling Water, Hydraulic Oil, Reverse Seal Control Foaming Molding Control
and Lubrication Oil Consumption

Complying with safety regulations

EU safety regulations (CE Marking)
Industrial machinery
Industry safety rules (JIMS K1001)
 Faster Cycle Performance Phenomenal Energy Savings
Quicker dry cycle, substantially improving productivity Product improvement by 30%,
power consumption reduced by 60%, and CO2 reduced 92t/year
Rigid fast cycle toggle Ex.1 Reduced cycle time and energy savings Product: Case
JSW original high-rigidity fast cycle toggle
AD Series provides industry-leading energy savings as well as substantial Qty: 1
mechanism, provides quicker dry cycle
reduction in cycle time Resin: PP
time.
Weight: 935g
Mold open/close time has been substantially reduced

Dry cycle time is further reduced by
improving the platen speed by 20%. Hydraulic Mold close Injection hold Cooling Mold open Ejection

Ejector speed has been improved to reduce machine
4.0 7.5 16.0 6.4 6.6
650T 40.5sec
product removal time.

The speed of mold height adjustment has Electric Mold Injection hold Cooling Mold Ejection
been improved to allow reduced setup time.
machine close
6.5 15.3
open
4.2
27% Reduced
J650AD 1.4 2.1
29.5sec

The high-rigidity clamping unit achieves
high-precision stabilized molding. (sec) 0.0 5.0 10.0 15.0 20.0 25.0 30.0 35.0 40.0 45.0

The flat press platen structure, which exerts Platen speed Dry cycle comparison (relative ratio) Number of products per hour Power consumption per hour Comparison of power consumption (relative ratio)

a clamping force evenly distributed over the

(%)

(kWh)
(m/min)

(%)
80 70 120 150 60 120
100 122 100
mold surface, minimizes the wall-thickness 70 60 46.5 60% Saved
100 50 100
79 120
60
fluctuation of molded products. (Pat. # 4107509) 50
80 67 89
40 80
90
40 17% improved 60 27% Improved 50
30 60
30 40 60 40
18.8
20 20 40
20
10 30
10 20
0 0
0 0 0
J650EL J650AD Hybrid J650EL J650AD
hydraulic machine J650AD hydraulic machine J650AD hydraulic Hybrid J650AD
machine
Substantial reduction in plasticizing time of new injection unit and new screw unit Comparison of our hydraulic machine (650T) and J650AD. When calculated with CO2 conversion factor of 0.555kg/kWh for annual operation time of 6,000 hours
(20 hours x 300 days).

New injection unit New design screw

The newly developed injection unit has been made smaller Improved High Melter M Screw with greater plasticizing Original Power Supply Regenerating Function (Energy Savings Technology)
and lighter, improving injection acceleration and deceleration and mixing performance is equipped as standard for 2300H The power supply regenerating function, which retrieves energy generated in injection or deceleration in mold open/close action as electric
performance. or larger injection unit. power, has been equipped from the previous series. Substantial energy savings are achieved through power supply regenerating function
Also, high injection power, heavy-duty drive provides robust in all the processes.
Through power supply regenerating function,
injection and greater plasticizing capability. Ex.2 Regenerated power supply in mold open/close approximately 8% of power supply is regenerated in
mold open/close process.

Mold Mold 8%
Mold close clamping loosening Mold open Regenerated
120

100 92
100

80
Consumption
Already industry-leading plasticizing capability has been 60

further improved by 10%. It reduces the plasticizing time that 40

contributes to the cycle time.
20
0
Plasticizing capability With power Without power
Regeneration supply regeneration supply regeneration
(kg/h)

600 550
500
500

400 Environmentally-friendly, substantially reducing cooling water,

300 10% improved hydraulic oil, and lubrication oil
200

Cooling water usage saving to 1/5 or less of the hydraulic machine
100

Hydraulic oil usage saving to 1/30 or less of the hydraulic machine
0

Lubricating grease usage reduced by 25% from the previous series by developing new JS1 Grease, superior in load bearing, adhesive
EL-3900H AD-3900H
property, and lubrication property
3 4
 Upgraded Controller Advanced Control System
Easy Operation, Multiple Functions The industrys fastest class 62 micro second servo control circuit
New Controller SYSCOM3000 attains a new high in accuracy and stable quality levels

A vertically arranged large 15-inch TFT color LCD screen. The controller provides the Use of a high-speed servo control circuit in Comparisons of variations in the transfer JSW original high-speed servo
position at 160 mm/s injection speed control board
operator with a clear view of molding parameters. the AD Series reduces scanning time to 1/16th
of conventional controls and achieves an

(mm)
Variation in transfer position
0.20

An illustration of the machine, in conjunction with operation mode keys and a touch screen 0.16
outstanding 62 micro seconds of scan time. It 0.15
ensures easy operation.
promotes product quality through a reduction

Languages are selectable from English, Chinese, and Japanese even during running. Other in performance variation, such as holding
0.1

languages (Hangul, Spanish, and French) are optional. pressure transfer positions. 0.05
0.01

Storage of molding conditions: 120 conditions can be stored in internal memory and 1,000 0.0

conditions in external USB memory.

Molding conditions, waveform data, or measurement data can be exported to USB memory,
which makes editing and managing in a computer easy.

Password function has been added for security. Passwords can be set for each management Highly upgraded resolution of the injection pressure detector
level. (Option) The resolution of the load cell amplifier for the injection pressure Resolution of pressure detection
(assumed to be 10 Mpa of back pressure)
has been intensified five fold for more accurate back pressure
2.5
SYSCOM3000 screen control which helps ensure stabilized precision molding. 2.5

2.0

Resolution (%)
Operation includes the condition 1.5
Cycle monitor screen
setting screen, the touch panel screen, 1.0
0.5
0.5
and the selector switches.
0.0
Ex.3 Molding stability (Standard molding) J-EL J-AD
Condition setting screen
1007.5
J650AD
1005.0
J650EL
Product: Tray 1002.5

Qty :1 1000.0

Product weight (g)

997.5
Resin : PP
995.0
992.5
990.0
Convenient monitoring screens
Touch panel screen 987.5
985.0
982.5
0 5 10 15 20 25 30 35 40 45 50
Shot number

Variation in product weight Variation in cushion

Product weight (g) 0.76
0.25 0.8
J650EL J650AD

(mm)
(%)
0.201
25% Improved 45% Improved
0.2
MAX 997.8 996.3 0.151
0.6
0.42
MIN 995.8 994.8 0.15
0.4
Selector switches AVG 996.8 995.4 0.1
R 2.0 1.5 0.2
0.05
R/AVG (%) 0.201 0.151
0.641 0.365 0 0

/AVG (%) 0.064 0.037 J650EL J650AD J650EL J650AD

Condition setting screens

Dual Integrated Control system (D.I.C. system) Optional equipment

for molding machine and product takeout robot
The product takeout robot can be operated from SYSCOM3000, and also the molding machine can be operated from the controller of
the product takeout robot. Effective for reducing setup time.

Jointly developed with Yushin Precision Equipment Co., Ltd.

5 6
 JSW Original Control Enables Precision Mo lding
HAVC (High Accuracy Volume Control) NEW Standard equipment Clamp Force Feedback Control NEW Standard equipment

Clamping force feedback effect (patent pending) Mold thickness Sensor

Technology to stabilize injection pressure for every shot and product weights by reverse sealing after completion of weighting and performing motor
Clamping force is always monitored with a sensor while molding
high precision control of screw position. Effective for molding that requires higher level of precision stability than traditional stability control.
and automatically corrected to the set value. Also, clamping force
Control action can be changed while molding observing the actual molding. Clamping
servo
Rolling action when reverse sealing Re-back pressure action Depressurizing action
Visualization of the actual clamping force in toggling motor
Ring released Ring closed Ring closed machine

Improved product quality by stabilizing gas venting

Longer mold life with optimum clamping force Platen move command
Control SYSCOM
3000

Reduction of mold maintenance by stabilizing gas venting Mold thickness move command equipment Setting
clamping
force
Backflow prevention ring Ring closure activated Stabilization of weighting resin density
Ordinary molding Clamping force feedback control
80 80
70 70
Mold temperature
60 Mold temperature 60

Temperature (C)

Temperature (C)
Reverse Seal Control Standard equipment 50 50

Clamping force

Clamping force
40 40
Closure of the backflow prevention ring by rotating the screw in reverse direction for a certain amount to lower the pressure in the screw Clamping force 30 30
Clamping force
and at the tip. It is especially effective for low speed injection molding. 20 20
Control action 10 10
Ex. 4 Product stability (Reverse seal) 0 0
Ring open 0 500 1000 1500 2000 2500 Shot number 0 500 1000 1500 2000 2500 Shot number
Clamping force increases as mold temperature rises Stable even when mold temperature rises
Molding
machine: J650AD
Product: Tray
Injection Compression Molding Standard equipment
Activate closure of backflow prevention ring
Qty: 1 by reverse rotation action
Activate closure of ring JSW injection compression molding feature enables the mold position to be controlled to accuracies over 10 times that of direct-pressure
Material: PP molding.
A-mode (A1 A6, A7 <option>) B-mode (B1 and B3)
1007.5 Mold opens by injection force
Reverse seal Product weight (g) Variation in product weight
1005.0 Standard molding
1002.5 Standard Reverse 0.151
molding seal 0.16
Product weight (g)

1000.0
0.14 33% Improved
997.5 MAX 996.3 995.0
0.12 0.101 Stop before Injection 6-step compression
995.0 MIN 994.8 994.0 Initial clamping Injection 6-step compression mold contact
0.10
992.5
(%)

AVG 995.4 994.5 0.08

990.0 Light guide panel Effects of injection compression molding
R 1.5 1.0 0.06 Lamination molding
987.5
0.04 fine prism transfer
Reduction in product distortion
985.0 R/AVG (%) 0.151 0.101
982.5
0.02
Improvement in transcription
0.365 0.298 0
0 5 10 15 20 25 30 35 40 45 50
Easier mold release
/AVG (%) 0.037 0.030 Standard molding Reverse seal
Shot number

Cycle time reduction

Lowering the clamping force (Low-pressure molding)

Gas venting

Skin adhesion molding
IWCS (Injection Weight and Cushion Stability) Control Standard equipment

Foaming Molding Control Optional equipment

A patented control that stabilizes the density of the molten resin stored at the tip of the screw on every shot. This technology is effective
in minimizing the variance in product weight. (Pat. # 3529771) JSWs unique high precision platen position control enables expanding foam molding incomparably stable compared with traditional
method. The dedicated position sensor stabilizes product dimensions by directly detecting the position of the platen and performing
Effect of reduced cushion variation feedback control. Stable
This is the control method to re-stabilize the measured density of
melted resin of each shot after plasticizing which is prepared at 0.30 core back
screw head section. This is the unique control technology of JSW PBT position Product cross section
that exerts great effect to correct unbalance between product mass
0.25 PA6 Features
High-fluidity PP
and cushion. 0.20
Excellent stability in repeated core back
Skin layer
(mm)

0.15 position control

0.10

Relatively inexpensive equipment
Foam layer

Post installable to existing machine
0.05
Po
Skin layer
0.00

Ordinary control IWCS control Sensor

7 8
 Standard and Optional Equipment Enabling High Quality Performance
Standard Equipment List Options List

Item Item Item Item

Open nozzle Touch panel 15" TFT color LCD controller Long nozzle Multi-language select (French, Spanish or Hangul) Note 7
N2000F barrel 120 Mold condition storage (Internal memory) Note 6 Shut-off nozzles (Pneumatic type and Hydraulic type) Simple centralized monitor system Link10 Note 8
Chrome plated screw Note 1 Soft start molding LSP-2 screw (Abrasion-resistant type) Centralized control system NET100 Note 9

Electrical Instrumentation and control

Purge cover (with limit switch) Self diagnostics function Screw & Barrel for high plasticization Heater burnout alarm
Injection unit swiveling device (with limit switch) Note 2 Help function Screw & Barrel for optical application Mold temperature display (with mold temperature upper/lower limit alarm)
Screw cold start prevention Pop-up display High dispersion screw Mold temperature control (with mold temperature upper/lower limit alarm)

Injection Unit
Wide selection of screws & barrels
Molding/Pause temperature select Clock High viscosity resin screw Printer (with printer cable)

Controller
Injection and Plasticizing Unit

Auto purging circuit Multi-language select (English, Chinese, Japanese) Long-fiber resin screw Password Function
Nozzle retract select Print screen by USB memory Special screw Note 1 Hot runner control circuit
Pull-back select USB printer port Note 7 Barrel Insulation cover Unscrewing motor circuit
Auto grease lubrication Overall setting screen Barrel blower cooling unit Ejector gate cutting circuit
Injection/Metering Injection/Holding pressure :1~6 Steps (Variable) Pre-heat timer Hopper (Option for all the region) Ejector plate return confirmation circuit
programmed control Metering/Back pressure :1~3 Steps (Variable) Product takeout robot circuit High holding pressure molding (for long-time holding pressure molding) Note 2 Injection speed:10 Steps control
Holding pressure transfer select Attended/Unattended operation select Electric motor driven IU advance/retract Injection speed slope control
Holding pressure Step mode Emergency stop button Vented barrel Foaming molding control
control select Slope mode Safety key Daylight extension Skin adhesion molding control
Barrel temperature control (PID) Note 3 Actual value display T-slot platen D.I.C. (Dual Integrated Control) with Yushin Robot
Nozzle temperature control (PID/SSR) Mold temperature display Note 8 Locating ring Hopper stage
Synchronous temperature rise control Injection/Metering waveform monitor Air jet Cooling water failure warning

Others
Hopper flange temperature control Oscilloscope waveform monitor Core pull device (Pneumatic type and Hydraulic type) Note 3 Leveling pad for installation Note 10
Soft pack servo control Injection/Metering waveform storage Valve gate device (Pneumatic type and Hydraulic type) Note 3 Rotary warning light

Clamping Unit
HAVC (High Accuracy Volume Control) Barrel temperature monitor Auto safety gate open Export specification Note 11
IWCS (Injection Weight and Cushion Stability) control Injection pressure monitor Auto safety gate open/close Designated color Note 12
Reverse seal control Statistical graph Safety mat Note 4 For details of each option, confirm in the specifications for the options.
Grease-free toggle bushing Production monitor Safety footplate Note 7. Regarding the other languages, contact us separately.
Auto grease lubrication Cumulative operating hour display Mold clamper English and Chinese are equipped as standard.
Monitor

Note 8. The LINK10 has actual data collection, molding condition control and remote control
High-performance platen support Cycle monitor Mold setup device
functions.
Flat press platen mechanism (Stationary side/Movable side) Molding condition upper/lower limit monitor Note 9 Magnet mold Clamper Note 5 Note 9. The NET100 has quality control and production control
Mold open/close and Mold open/close : 4 Steps (Fixed) Inspection and Maintenance guide Note 10 Cooling water manifold on platen function in addition to the functions that the LINK10 has.
Note 10. May not be applicable depending on the model.
Ejector programmed control Ejector : 1~3 Steps (Variable) Heater system fault alarm Hydraulic power pack
Note 11. Regarding the export specifications, separate discussion is needed in some cases,
Mold protection 1~3 Steps (Variable) Injection pressure overshoot alarm Ejector braking system Note 6 depending upon the export destination.
Ejector braking system Note 4 Grease lubrication fault alarm Note 12. Designate colors, referring to color samples or Munsell codes.
Note 1. Regarding special screws, contact us separately.
Electric-driven mold thickness adjusting device Servo fault alarm Note 2. Enables a long holding time and high holding pressure molding.
Clamping Unit

Auto clamp force setting Unreleased clamp alarm The injection speed may become lower.
Note 3 For the hydraulic type, a separate hydraulic unit is needed.
Clamp force display Position calibration request Note 4. Safety mat on the top of the step is equipped as standard for J650AD and higher.
Clamp force feed back control Alarm buzzer Safety mat on the top of the inter-platens bed is equipped as standard for J850ADW
A -mode Alarm history and higher (models with 1200mm or wider gap between tie-bars).
Toggle type clamp injection Note 5. When applied, extended nozzle is required.
B -mode Set value history Note that the usable mold thickness range will change.
compression Function
Compression : 1~6 Steps (Variable) Safety compliance to JIMS K1001 Note 6. Equipped as standard for J650AD and higher.
Others

Clamping safety device (Electrical/Mechanical) Cooling water closed circuit for feed throat Examples of standard Examples of optional equipment
Robot mounting holes Mold cooling water circuit (Machine bed) equipment
Screw rotation during mold open/close Accessories (Maintenance tools, Ejector rods, etc.)
Compound action Eject during mold open
Note 6. The external memory is capable of storing conditions for 1,000 molds.
Injection during clamp up Prepare commercial USB data storage media.
Operator side step safety mat Note 7. The printer and printer cables are options.
Safety mat Note 8. Temperature sensors and electric wiring are not included.
Under mold area safety mat Note 5
Note 9. Maximum of 16 items and alarms can be selected out of the following monitor items.
Cycle time Injection time Metering time Cushion position
Note 1. GP21 screw for Injection unit 1400H.
Holding pressure end position Injection pressure
High-Melter MIII screw for Injection unit 2300H and higher.
Holding pressure transfer pressure Screw back pressure
Note 2. Manual operation type for Injection unit 1400H.
Metering end position Injection start position Holding pressure transfer position
Safety mat Leveling pad for installation Hydraulic unit Spare receptacle
Note 3. Injection unit 1400H is controlled by SSR (non-contact).
Mold open time Mold close time Metering torque
Injection unit 2300H and higher are controlled by MC (contact).
Holding pressure transfer speed Mold inner pressure (option)
Note 4. Equipped as standard for J650AD and higher, optional for J550AD.
Clamp force Shift amount (HAVC) End speed (HAVC)
Note 5. Safety mat on the top of the step is equipped as standard for J650AD and higher,
Note 10. Indicates inspection times and items.
optional for J550AD.
Safety mat on the top of the inter-platens bed is equipped as standard for J850ADW
and higher (models with 1200mm or wider gap between tie-bars), optional for J850AD.

Mold cooling water closed circuit Mold cooling water closed circuit Core circuit (hydraulic) unloading slot Screws for various molding
(bed installing type) (platen installing type) applications
The appearance and the specifications of the machine may be altered for improvement without notice. Unauthorized reprint from this leaflet is prohibited.
9 The photographs in this leaflet include options. 10