Arch Objective
Arch Objective
UNIT I
ARCHES
1. A three hinged parabolic arch a span of 60 meters and rise of 15 meters. The arch carries two
concentrated loads of 250 kN and 200 kN at distances of 10 m and 18 m from the left end. It also
carries a UDL of 70 kN/m on the right half of the span. Calculate the vertical and horizontal
reactions at supports. Also calculate the normal thrusts and radial shear at section 18 m from left
support. 10M
2. The equation of the axis of the three hinged arch is y=x-x2/2, the origin being the left hand
support. The span and rise are 12 m and 3 m respectively. The left half of the arch is loaded with
uniformly distributed load of 30 kN/m.
Evaluate
(a) The reaction component at support. 4M
(b) Moment, normal thrust and radial shear at a section 3 m from left hand support. 6M
3. A parabolic arch rib, 20 m span and 3 m rise is hinged at the abutments and the crown and
carries a point load of 10 kN at 7.5 m from left hand hinge. Calculate the horizontal thrust and
bending moment at 7.5 m from right hand hinge. What is the value of greatest bending moment
in the arch, and when does it occur? 10M
4. A circular arched rib, span 50 m and rise 10 m is hinged of crown and springing and carrying the
vertical loads of 60 and 100 kN at a horizontal distance 12 m and 30 m from left hand support.
Find the reaction components at the springing and moment, normal thrust and radial shear at
section 10 m left support. 10M
5. A three hinged circular arch hinged at the springing and crown points has a span of 40 meters
and central rise of 8 meters. The arch carries a UDL of 20 kN/m over the left half of the span
together with a concentrated loads of 100 kN at the right quarter span point. Find the vertical and
horizontal reactions at supports. Also calculate the normal thrusts and radial shear at section 10
m from left support. 10M
6. A two hinged circular arch of span 20 m and rise 4 m is loaded with a uniformly
distributed load of 100 kN/m over the left half of the span and a concentrated load of
80 kN at the midpoint of the right half of the arch. Calculate the horizontal reaction and normal
thrust at a section just to the right of concentrated loads. 10M
8. A two hinged parabolic arch of span 30m and rise 6m carries a uniformly distributed
load of 20kN/m covering a distance of 12m from left end. Find the horizontal thrust
and the reactions at the two supports. Also calculate the maximum hogging moment
in the arch. 10M
9. A two hinged parabolic arch of span 20m and rise 4m carries a uniformly distributed
load of 20kN/m on the whole span. Find the horizontal thrust and the reactions at the
two supports. If now one support yields laterally with respect to the other support by
2 7 4
0.02. What will be the horizontal thrust? Take E=200kN/mm and Io=1.7x10 mm . 10M
10. a) State Eddys theorem 2M
b) Explain rib shortening 2M
c) Under what conditions will the bending moments in an arch be zero thought 2M
d) Explain the effect of yielding of support in the case of an arch? 2M
e) Which of the two arches, viz. circular and parabolic is preferable to carry a uniformly
distributed load? Why? 2M
UNIT I
ARCHES
A) Crown of the arch B) mid of the crown & left support hinge
5. A three hinged arch is loaded with an isolated load 1000kg at a horizontal distance of 2.5m from
the crown, 1m above the level of hinges at the supports 10m apart. The horizontal thrust is[ ]
6. If a three hinged parabolic arch carries a uniformly distributed load on its entire span, every
section of the arch resists [ ]
A) times the rise of the crown B) times the rise of the crown
C) times the rise of the crown D) times the rise of the crown
12. A three hinged parabolic arch hinged at crown and springings, has a horizontal span of 4.8m and
a central rise of 1m. It carries a UDL of 0.75 tonnes per metre over half left hand span. The
horizontal thrust at the support will be [ ]
14. An isolated load W is acting at a distance a from the left hand support, of a three hinged arch of
span 2L and a rise h hinged at the crown, the horizontal reaction at the support is [ ]
A) B) C) D)
15. An isolated load W is acting at a distance a from the left hand support, of a three hinged arch of
span 2L and a rise h hinged at the crown, the vertical reaction at the support is [ ]
A) B) C) D)
16. If a three hinged parabolic arch (span l, rise h) is carrying a UDL of w/unit length over the entire
span [ ]
17. The maximum B.M due to an isolated load in a three hinged parabolic arch ( span l, rise h)
having one of its hinge at crown, occurs on either side of the crown at a distance [ ]
A) B) C) D)
A) V -H B) V +H
C) V -H D) V +H
A) V -H B) V +H
(C) V -H D) V +H
A) Tension B) compression
A) 4 B) 2 C) 3 D) 5
A) B) C) D)
A) B) C) D)
27. In three hinged circular arches R can be determined from the relationship [ ]
A) , B) ,
A) B) C) D) none of these
30. A three hinged arch of span 24m and a central rise of 8m the body of the arch are fabricated with
rolled steel sections. Find the change in central rise if the change in temperature is 30c [ ]
A) 8.36mm B) 10.36 mm
C) 9.36 mm D)11.36mm
A) dx B) dx C) dx D) dx
32. Due to change in temperature in two hinged arches the horizontal thrust H= [ ]
A) B) C) D)
A) R ( + B) R ( -
C) R ( - D) R ( +
34. A two hinged semicircular arch of radius R carries a concentrated load W at the crown. The
horizontal thrust is: [ ]
Structural Analysis-II Page 6
QUESTION BANK 2016
35. A symmetrical parabolic arch of span l and height h is hinged at both the supports. The arch
carries a udl of w/unit length along the entire span. Which one of the following is correctly matched?
[ ]
37. For a two-hinged arch, if one of the supports settles down vertically, then the horizontal thrust
[ ]
39. The vertical distance between springing line to any point in the arch is ________. [ ]
40.A fixed arch with a single hinge at Crown Point is a ____________ structure [ ]