Guia de Estudio CCDA

Download as docx, pdf, or txt
Download as docx, pdf, or txt
You are on page 1of 44
At a glance
Powered by AI
Some of the key phases of network design methodology include Plan, Build, Manage. Other important terms are NBAR, NetFlow, and virtualization. Business forces like growth of applications and regulation must be considered in network decisions.

The main phases of the network design methodology are Prepare, Plan, Design, Implement, Operate, and Optimize (PPDIOO).

Some examples of network analysis tools mentioned are NBAR, NetFlow, and EtherPeek.

5. Match each PPDIOO phase with its description.

i. Implement - d. Installation and configuration


PART 1. CHAPTER 1. NETWORK DESING METODOLOGY ii. Optimize - f. Proactive management
iii. Design - c. Provides high-availability design
iv. Prepare - b. Gap analysis
Key Terms
v. Operate - e. Day to day
vi. Plan a. Establish requirements
PBM: Plan, Build, Manage Network Lifecycle.
NBAR: Network-Based-Application Recognition. (Motor de clasificacin de trfico, parecido a un
6. Which borderless architecture provides mobility?
analizador de trfico incorporado, desde L3 hasta L7.
a. Policy
NetFlow: Protocolo para recolectar informacin sobre trfico IP.
b. Network services
Policy Control: Polticas aplicadas por los dispositivos para ejercer control.
c. User services
Virtualization: Separacin lgica de los sistemas bajo un mismo hardware.
d. Connection management
e. Control services

1. List the PPDIOO phases in order.


7. Which are the three steps in the design methodology?
Prepare, Plan, Desing, Implement, Operate, Optimize
a. Reviewing the project cost
b. Designing the network topology and solution
2. Which business forces affect decisions for the enterprise network?
c. Characterizing the network
a. Removal of borders
d. Identifying customer requirements
b. Virtualization
e. Validating the design
c. Growth of applications
d. 10GigEthernet
8. Match each infrastructure service with its description.
e. Regulation
i. Identity - d. AAA
f. ROI
ii. Mobility - a. Access from a remote location
g. Competitiveness
iii. Storage - e. Storage of critical data
iv. Compute - b. Improved computational resources
3. Which design methodology step is important for identifying organizational goals?
v. Security - f. Secure communications
a. Identify customer requirements.
vi. Voice/ collaboration - c. Unified messaging, NAC
b. Characterize the existing network.
c. Design the network topology and solution.
9. A company location is used to test a new VoIP solution. What is this type of test
d. Examine the architecture.
called?
e. Validate the design.
a. Prototype
f. Obtain the ROI.
b. Pilot
c. Implementation
4. What needs to be obtained prior to designing the network?
d. New
a. Expected ROI
b. Organizational and technical goals
10. An isolated network is created to test a new design. What is this type of test called?
c. Technical constraints
a. Prototype
d. Bill of materials
b. Pilot
e. Existing and new network applications
c. Implementation
d. New
17. What components are included in the design document? (Select four.)
11. NBAR, NetFlow, and EtherPeek are examples of what? a. IP addressing scheme
a. Network audit tools b. Implementation plan
b. Network analysis tools c. List of Layer 2 devices
c. SNMP tools d. Design requirements
d. Trending tools e. Selected routing protocols
f. List of Layer 1 devices
12. Monitoring commands, CiscoWorks, and WhatsUP are examples of what?
a. Network audit tools 18. Match each design document section with its description.
b. Network analysis tools i. Introduction - d. Goals
c. SNMP tools ii. Design Requirements - c. Organizational requirements
d. Trending tools iii. Existing Network Infrastructure - b. Current diagram and configuration
iv. Design - f. New logical topology
13. Which of the following are technical constraints? (Select all that apply.) v. Proof of Concept - e. Pilot
a. Existing wiring vi. Implementation Plan - a. Detailed steps
b. Existing network circuit bandwidth vii. Appendix - g. Supporting information
c. Improving the LANs scalability
d. Adding redundancy 19. The network health analysis is based on what information?
a. The number of users accessing the Internet
14. Which of the following are technical goals? (Select all that apply.) b. The statements made by the CIO
a. Existing wiring c. Statistics from the existing network
b. Existing network circuit bandwidth d. The IP addressing scheme
c. Improving the LANs scalability
d. Adding redundancy 20. While performing a network audit, you encounter a Frame Relay WAN segment
running at a sustained rate of 75 percent from 9 a.m. to 5 p.m. What do you recommend?
15. Which of the following are organizational goals? (Select all that apply.) a. Nothing. The daily 24-hour average rate is still 45 percent.
a. Improving customer support. b. Change from Frame Relay to MPLS.
b. Budget has been established. c. Increase the provisioned WAN bandwidth.
c. Increasing competitiveness. d. Deny VoIP calls from 9 a.m. to 5 a.m.
d. Completion in three months.
e. Reducing operational costs. 21. What information is included in the network audit report? (Select all that apply.)
f. Network personnel are busy. a. Network device list
b. IOS versions
16. Which of the following are organizational constraints? (Select all that apply.) c. Router models
a. Improving customer support. d. Interface speeds
b. Budget has been established. e. WAN utilization
c. Increasing competitiveness.
d. Completion in three months.
e. Reducing operational costs.
f. Network personnel are busy.
22. Which three tasks are part of characterizing the existing network?
a. Speaking with the CIO 28. Which are potential scopes for a network design project? (Choose three.)
b. Using traffic analysis a. Network layer redundancy
c. Automated auditing of the network using tools b. Campus upgrade
d. Collecting information c. Data link layer redundancy
e. Obtaining organizational chart d. Network redesign
f. Defining organizational goals e. WAN upgrade
f. Application upgrade
23. Which command provides the average CPU of a Cisco router?
a. show cpu 29. A credit card company network is being designed. Secure transactions are
b. show processes cpu emphasized throughout the initial requirements. Redundant links are required to reduce
c. show processes memory network outages. What is the order of importance of the following design issues?
d. show cpu utilization a. IP addressing design (2)
e. show cpu average b. Physical topology design (3)
c. Network modules (4)
24. Which parameters can be obtained by the use of a traffic analyzer? d. Security design (1)
a. Application importance
b. QoS requirements 30. Which types of tools are used during the network design process?
c. Devices using a specific protocol a. Network management tools
d. IP addresses of devices and TCP/ UDP port number b. Network trending tools
e. Average bit rate and packet rate c. Network modeling tools
d. Network simulation and testing tools
25. Which commands provide information about individual applications, protocols, or e. Network implementation tools
flows? (Choose three.)
a. show process cpu 31. Which four items should be present in the implementation plan?
b. show ip interface a. Implementation description
c. show ip cache flow b. Estimated time to implement
d. show ip nbar protocol-discovery c. Reference to design document
e. show process memory d. Rollback procedure
f. show interface application e. Estimated cost of implementation
f. Application profiles
26. What is used to create the documentation of the existing network?
a. Router show commands 32. A new design uses IPsec for the WAN. Which approach should be used to verify the
b. Network audit, documentation, and traffic analysis tools design?
c. Audit tools a. Live network
d. Existing documentation and input from the organization b. Pilot network
c. Prototype network
27. What is the sequence for the stages of top-down design? d. Cable network
1. Identify customer requirements. e. Internet network
2. Define upper OSI layers.
3. Gather additional information.
4. Choose underlying technology.
33. Which three components are included in the design document? e. Operate
a. Design details d. Optimize
b. Design requirements
c. Current cable runs 40. Which PPDIOO phase identifies and resolves issues before they affect the network?
d. List of Layer 2 devices a. Prepare
e. Implementation plan b. Plan
c. Design
34. Which sources are used to characterize a network? d. Implement
a. Sniffer, CIO meeting, ip config/ all e. Operate
b. Network audit, input from staff, traffic analysis f. Optimize
c. show cdp, show lldp
d. Network assessment, server statistics, SNMP discovery 41. Which PPDIOO phase produces network diagrams and an equipment list?
a. Prepare
35. Which information should be included in the design implementation plan? b. Plan
a. Step description, time to implement, implementation guideline c. Design
b. Step description, implementation explanation, rollback time d. Implement
c. Design document references, step description, estimated time to implement e. Operate
d. Implementation time, rollback time, implementation explanation f. Optimize

36. What layer of the OSI model is used to start a top-down design approach effort? 42. Which PPDIOO phase assesses the network and produces a gap list?
a. Network Layer a. Prepare
b. Presentation Layer b. Plan
c. Application Layer c. Design
d. Political Layer d. Implement
e. Operate
37. What are the benefits of the bottom-up design approach? f. Optimize
a. Based on previous experience, allows for quick solution
b. Uses the organizations requirements, allows for a quick solution 43. Which PPDIOO phase develops a network strategy?
c. Based on previous experience, meets future requirements a. Prepare
d. Uses organizations requirements, meets future requirements b. Plan
c. Design
38. What are the benefits of the top-down design approach? d. Implement
a. Based on previous experience, allows for quick solution e. Operate
b. Uses the organizations requirements, allows for a quick solution f. Optimize
c. Based on previous experience, meets future requirements
d. Uses the organizations requirements, meets future requirements 44. Which PBM phase includes validation, deployment, and migration processes?
a. Plan
39. Which PPDIOO phase is the designs final test? b. Design
a. Prepare c. Build
b. Plan d. Manage
c. Design
d. Implement 45. Which PBM phase includes product and solution support processes?
a. Plan 8. True or false: You can implement a full-mesh network to increase redundancy and
b. Design reduce a WANs costs.
c. Build
d. Manage 9. How many links are required for a full mesh of six sites?
N(n-1)/2 = #Link Full mesh
6*(6-1)/2 = 15
PART 1. CHAPTER 2. NETWORK DESING MODELS
10. List and describe four options for multihoming to the SP between the enterprise edge
and the SP edge. Which option provides the most redundancy?
Enterprise Architecture Model Option 1: Single router, dual links to one ISP. Option 2: Single router, dual links to two ISPs.
Enterprise Campus: Campus Core, Building distribution and aggregation, Building access, Option 3: Dual routers, dual links to one ISP. Option 4: Dual routers, dual links to two ISPs.
Server Farm / Data center.
11. To what enterprise edge submodule does the SP edge Internet submodule connect?
Enterprise Edge: E-Commerce, DMZ/Internet (Public server, e-mail, DNS), Enterprise WAN, The SP edge Internet submodule connects to the enterprise edge Internet submodule.
Remote Access VPN.
12. What are four benefits of hierarchical network design?
Service Provider Edge WAN/Internet: Internet, PSTN Services, WAN Services. Cost savings, ease of understanding, easy network growth (scalability), and improved fault
isolation.
Remote Modules: Enterprise branch, enterprise datacenter and enterprise teleworker modules.
13. In an IP telephony network, in which submodule or layer are the IP phones and CUCM
1. True or false: The core layer of the hierarchical model does security filtering and media
servers located?
translation.
IP phones reside in the building access layer of the campus infrastructure. The CallManagers
are placed in the server farm of the enterprise campus.
2. True or false: The access layer provides high availability and port security.

14. Match the redundant model with its description:


3. You add Communications Manager to the network as part of a Voice over IP (VoIP)
i. Workstation-router redundancy - c. Host has multiple gateways.
solution. In which submodule of the Enterprise Architecture model should you place
ii. Server redundancy - d. Data is replicated.
Communications Manager?
iii. Route redundancy - b. Provides load balancing.
The server farm.
iv. Media redundancy - a. Cheap when implemented in the LAN and critical for the WAN.
4. True or false: HSRP provides router redundancy.
15. True or false: Small-to-medium campus networks must always implement three layers
of hierarchical design.
5. Which enterprise edge submodule connects to an ISP?
The internet sub-model
16. How many full-mesh links do you need for a network with ten routers?
45
6. List the six modules of the Cisco Enterprise Architecture model for network design.
Enterprise campus, enterprise edge, enterprise WAN, enterprise branch, enterprise data center,
17. Which layer provides routing between VLANs and security filtering?
and enterprise teleworker.
a. Access layer
b. Distribution layer
7. True or false: In the Cisco Enterprise Architecture model, the network management
c. Enterprise edge
submodule does not manage the SP edge.
d. WAN module
18. List the four modules of the enterprise edge area. c. Building distribution
E-commerce, Internet, VPN/ remote access, and WAN. d. Campus core
e. Enterprise branch
19. List the three submodules of the SP edge. f. Enterprise data center
Internet services, WAN services, and PSTN services.
26. Which remote module connects to the enterprise via the Internet or WAN submodules
20. List the components of the Internet edge. and contains a small LAN switch for users?
Firewalls, Internet routers, FTP/ HTTP servers, SMTP mail servers, and DNS servers. a. SP edge
b. WAN submodule
21. Which submodule contains firewalls, VPN concentrators, and ASAs? c. Building distribution
a. WAN d. Campus core
b. VPN/ remote access e. Enterprise branch
c. Internet f. Enterprise data center
d. Server farm
27. Which three types of servers are placed in the e-commerce submodule?
22. Which of the following describe the access layer? (Select two.) a. Web
a. High-speed data transport b. Application
b. Applies network policies c. Database
c. Performs network aggregation d. Intranet
d. Concentrates user access e. Internet
e. Provides PoE f. Public share
f. Avoids data manipulation
34. Which solution supports the enterprise teleworker?
23. Which of the following describe the distribution layer? (Select two.) a. IP telephony
a. High-speed data transport b. Enterprise campus
b. Applies network policies c. Cisco Virtual Office
c. Performs network aggregation d. SP edge
d. Concentrates user access e. Hierarchical design
e. Provides PoE f. Data Center 3.0
f. Avoids data manipulation
35. Which are two benefits of using a modular approach?
24. Which of the following describe the core layer? (Select two.) a. Simplifies the network design
a. High-speed data transport b. Reduces the amount of network traffic on the network
b. Applies network policies c. Often reduces the cost and complexity of the network
c. Performs network aggregation d. Makes the network simple by using full mesh topologies
d. Concentrates user access
e. Provides PoE 36. Which three modules provide infrastructure for remote users? (Select three.)
f. Avoids data manipulation a. Teleworker module
b. WAN module
25. Which campus submodule connects to the enterprise edge module? c. Enterprise branch module
a. SP edge d. Campus module
b. WAN submodule e. Enterprise data center
f. Core, distribution, access layers

37. Which are borderless networks infrastructure services? (Select three.) 42. Which are key features of the distribution layer? (Select three.)
a. IP telephony a. Aggregates access layer switches
b. Security b. Provides a routing boundary between access and core layers
c. QoS c. Provides connectivity to end devices
d. SP edge d. Provides fast switching
e. High availability e. Provides transport to the enterprise edge
f. Routing f. Provides VPN termination

38. Which module contains devices that supports AAA and stores passwords? 43. Which Cisco solution allows a pair of switches to act as a single logical switch?
a. WAN module a. HSRP
b. VPN module b. VSS
c. Server farm module c. STP
d. Internet connectivity module d. GLB
e. SP edge
f. TACACS 44. Which module or layer connects the server layer to the enterprise edge?
a. Campus distribution layer
39. Which topology is best used for connectivity in the building distribution layer? b. Campus data center access layer
a. Full mesh c. Campus core layer
b. Partial mesh d. Campus MAN module
c. Hub and spoke e. WAN module
d. Dual ring . Internet connectivity module
e. EtherChannel
45. Which server type is used in the Internet connectivity module?
40. What are two ways that wireless access points are used? (Choose two.) a. Corporate
a. Function as a hub for wireless end devices b. Private
b. Connect to the enterprise network c. Public
c. Function as a Layer 3 switch for wireless end devices d. Internal
d. Provide physical connectivity for wireless end devices e. Database
e. Filter out interference from microwave devices f. Application

41. In which ways does application network services help resolve application issues? 46. Which server types are used in the e-commerce module for users running
(Choose two.) applications and storing data? (Select three.)
a. It can compress, cache, and optimize content. a. Corporate
b. Optimizes web streams, which can reduce latency and offload the web server. b. Private
c. Having multiple data centers increases productivity. c. Public
d. Improves application response times by using faster servers. d. Internet
e. Database
f. Application
g. Web
d. Design in circular networks

47. Which are submodules of the enterprise campus module? (Select two.) 53. Which layer performs rate limiting, network access control, and broadcast
a. WAN suppression?
b. LAN a. Core layer
c. Server farm/ data center b. Distribution layer
d. Enterprise branch c. Access layer
e. VPN d. Data link layer
f. Building distribution
54. Which layer performs routing between VLANs, filtering, and load balancing?
48. Which are the three layers of the hierarchical model? (Select three.) a. Core layer
a. WAN layer b. Distribution layer
b. LAN layer c. Access layer
c. Core layer d. Application layer
d. Aggregation layer
e. Access layer 55. Which topology allows for maximum growth?
f. Distribution layer a. Triangles
g. Edge layer b. Collapsed core-distribution
c. Full mesh
49. You need to design for a packet load-sharing between a group of redundant routers. d. Core-distribution-access
Which protocol allows you to do this?
a. HSRP 56. Which layer performs port security and DHCP snooping?
b. GLBP a. Core layer
c. VRRP b. Distribution layer
d. AARP c. Access layer
d. Application layer
50. Which is a benefit of using network modules for network design?
a. Network availability increases. 57. Which layer performs Active Directory and messaging?
b. Network becomes more secure. a. Core layer
c. Network becomes more scalable. b. Distribution layer
d. Network redundancy is higher. c. Access layer
d. Application layer
51. The Cisco Enterprise Architecture takes which approach to network design?
a. It takes a functional modular approach. 58. Which layers perform redundancy? (Select two.)
b. It takes a sectional modular approach. a. Core layer
c. It takes a hierarchical modular approach. b. Distribution layer
d. It takes a regional modular approach. c. Access layer
d. Data Link Layer
52. Which is the recommended design geometry for routed networks?
a. Design linear point-to-point networks 59. Which statement is true regarding hierarchical network design?
b. Design in rectangular networks a. Makes the network harder since there are many submodules to use
c. Design in triangular networks b. Provides better performance and network scalability
c. Prepares the network for IPv6 migration from IPv4 9. Which layer of the campus network corresponds to the data center aggregation layer?
d. Secures the network with access filters in all layers a. Core layer
b. Distribution layer
c. Access layer
PART 2. CHAPTER 3. ENTERPRISE LAN DESING d. Server farm

10. Which of the following is an access layer best practice?


1. True or false: Layer 2 switches control network broadcasts. a. Reduce switch peering and routing.
b. Use HSRP and summarize routes.
2. What technology can you use to limit multicasts at Layer 2? c. Disable trunking and use RPVST +.
CGMP (Cisco group management protocol) d. Offload SSL sessions and use load balancers.

3. True or false: Packet marking is also called coloring. 11. Which of the following is a distribution layer best practice?
a. Reduce switch peering and routing.
4. True or false: Usually, the distribution and core layers are collapsed in medium-size b. Use HSRP and summarize routes.
networks. c. Disable trunking and use RPVST +.
d. Offload SSL sessions and use load balancers.
5. What are two methods to mark frames to provide CoS?
Inter-Switch Link (ISL) 802.1p and IEEE 802.1q 12. Which of the following is a core layer best practice?
a. Reduce switch peering and routing.
6. Which of the following is an example of a peer-to-peer application? b. Use HSRP and summarize routes.
a. IP phone call c. Disable trunking and use RPVST +.
b. Client accessing file server d. Offload SSL sessions and use load balancers.
c. Web access
d. Using a local server on the same segment 13. Which of the following is a DC aggregation layer best practice?
a. Reduce switch peering and routing.
7. What primary design factors affect the design of a campus network? (Select three.) b. Use HSRP and summarize routes.
a. Environmental characteristics c. Disable trunking and use RPVST +.
b. Number of file servers d. Offload SSL sessions and use load balancers.
c. Infrastructure devices
d. Fiber and UTP characteristics 14. Which of the following are threats to the edge distribution?
e. Network applications a. IP spoofing
f. Windows, Linux, and mainframe operating systems b. Network discovery
c. Packet-capture devices
8. You need to connect a building access switch to the distribution switch. The cable d. All of the above
distance is 135 m. What type of cable do you recommend?
a. UTP
b. Coaxial cable
c. Multimode fiber
d. Single-mode fiber
15. An enterprise network has grown to multiple buildings supporting multiple d. Not controlled by VLANs
departments. Clients access servers that are in local and other buildings. The company
security assessment has identified policies that need to be applied. What do you 21. Match each LAN medium with its original physical specification.
recommend? i. Fast Ethernet - c. IEEE 802.3u
a. Move all departments to a single building to prevent unauthorized access. ii. Gigabit Ethernet - a. IEEE 802.3ab
b. Move all servers to one of the LAN client segments. iii. WLAN - b. IEEE 802.11b
c. Move all servers to a server farm segment that is separate from client LANs. iv. Token Ring - e. IEEE 802.5
d. Move all servers to the building distribution switches. v. 10 Gigabit Ethernet - d. IEEE 802.3ae

16. Link redundancy and infrastructure services are design considerations for which 22. True or false: Layer 3 switches bound Layer 2 collision and broadcast domains.
layers?
a. Core layer 23. Match each enterprise campus component with its description.
b. Distribution layer i. Campus infrastructure - a. Consists of backbone, building-distribution, and building-access
c. Access layer modules
d. All of the above ii. Server farm - c. Provides redundancy access to the servers
iii. Edge distribution - b. Connects the campus backbone to the enterprise edge
17. Which of the following are server connectivity methods in the server farm?
a. Single NIC 24. Match each LAN device type with its description.
b. EtherChannel i. Hub - e. Device that amplifies the signal between connected segments
c. Content switch ii. Bridge - a. Legacy device that connects two data link layer segments
d. All of the above iii. Switch - c. High-speed device that forwards frames between two or more data link layer
segments
18. What is the recommended method to connect the distribution switches to the core? iv. Layer 3 switch - d. High-speed device that bounds data link layer broadcast domains
a. Redundant triangle links v. Router - b. Network layer device that forwards packets to serial interfaces connected to the
b. Redundant cross-connect links WAN
c. Redundant Layer 3 squares
d. Redundant Layer 2 links 25. Match each application type with its description.
i. Peer to peer - b. IM
19. A campus network of four buildings is experiencing performance problems. Each ii. Client-local server - a. Server on the same segment
building contains 400 to 600 devices, all in one IP subnet. The buildings are connected in iii. Client/ server farm - d. Client accesses database server
a hub-and-spoke configuration back to building 1 using Gigabit Ethernet with multimode iv. Client-enterprise edge - c. Web access
fiber. All servers are located in building 1. What do you recommend to improve
performance? 26. Match each transmission medium with its upper-limit distance.
a. Connect all buildings in a ring topology. i. UTP - b. 100
b. Implement multiple VLANs in each building. ii. Wireless - d. 500 m
c. Move servers to the buildings. iii. Single-mode fiber - c. 90 km
d. Use single-mode fiber to make the Gigabit Ethernet links faster. iv. Multimode fiber - a. 2 km

20. Which of the following is true about data link layer broadcasts? 27. True or false: IP phones and LAN switches can reassign a frames CoS bits.
a. Not controlled by routers
b. Not forwarded by routers 28. Name two ways to reduce multicast traffic in the access layer.
c. Not forwarded by switches CGMP and IGMP Snooping
42. Company departments are located across several buildings. These departments use
29. What are two VLAN methods you can use to carry marking CoS on frames? several common servers. Network policy and security are important. Where should
Inter-Switch Link (ISL) 802.1p and IEEE 802.1q servers be placed?
a. Within all department buildings, and they should duplicate the common servers in each
30. True or false: You can configure both CGMP and IGMP snooping in mixed Cisco building.
switch and non-Cisco router environments. b. Connect the common servers to the campus core.
c. Use a server farm.
37. Which are environmental characteristics? (Select three.) d. Connect the servers to the distribution layer.
a. Transmission media characteristics
b. Application characteristics 43. A large company has a campus core. What is the best practice for the core campus
c. Distribution of network nodes network?
d. Operating system used a. Use triangles.
e. Remote-site connectivity requirements b. Use squares.
c. Use rectangles.
38. Which network application type is most stringent on the network resources? d. Use point-to-point mesh.
a. Peer-to-peer
b. Client to local server 44. A company has five floors. It has Layer 2 switches in each floor with servers. It plans
c. Client to server farm to move servers to a new computer room and create a server farm. What should it use?
d. Client to enterprise edge a. Replace all Layer 2 switches with Layer 3 switches.
b. Connect the Layer 2 switches to a Layer 3 switch in the computer room.
39. Why is LAN switching used more than shared LAN technology? (Select two.) c. Connect the Layer 2 switches to a new Layer 2 switch in the computer room.
a. Shared LANs do not consume all available bandwidth. d. Connect the Layer 2 switches to each other.
b. Switched LANs offer increased throughput.
c. Switched LANs allow two or more ports to communicate simultaneously. 45. A Fast Ethernet uplink is running at 80 percent utilization. Business-critical
d. Switched LANs forward frames to all ports simultaneously. applications are used. What can be used to minimize packet delay and loss?
a. Implement QoS with classification and policing in the distribution layer.
40. An application used by some users in a department generates significant amounts of b. Add additional VLANs so that the business applications are used on PCs on that VLAN.
bandwidth. Which is a best design choice? c. Perform packet bit rewrite in the distribution switches.
a. Rewrite the application to reduce bandwidth. d. Classify users in the access with different priority bits.
b. Use Gigabit Ethernet connections for those users.
c. Put the application users into a separate broadcast domain. 46. Which are four best practices used in the access layer?
d. Add several switches and divide the users into these switches. a. Disable trunking in host ports.
b. Limit VLANS to one closet.
41. Users access servers located on a server VLAN and servers located in departmental c. Use PVST + as the STP with multilayer switches.
VLANs. Users are located in the departmental VLAN. What is the expected traffic flow d. Enable trunking on host ports.
from users to servers? e. Use VLAN spanning to speed convergence of STP.
a. Most traffic is local. f. Use VTP Server mode in hierarchical networks.
b. All traffic requires multilayer switching. g. Use VTP Transparent mode in hierarchical networks.
c. There is no need for multilayer switching. h. Use RPVST + as the STP with multilayer switches.
d. Most of the traffic will have to be multilayer switched.
47. Which are three best practices used in the distribution layer? 52. What is an advantage of using the updated Layer 2 access layer design over the
a. Use HSRP or GLBP. traditional model?
b. Provide fast transport. a. There is an increase of uplink bandwidth.
c. Use Layer 3 routing protocols to the core. b. The updated model adds routing between distribution and access.
d. Use Layer 2 routing protocols to the core. c. The access layer switch needs to be able to route.
e. Summarize routes to the core layer. d. Layer 3 load balancing is enabled.
f. Summarize routes to the access layer.
53. Which Cisco IOS feature simplifies spanning tree topology?
48. Which are four best practices used in the distribution layer? a. Rapid PVST +
a. Disable trunking in host ports. b. MST
b. Limit VLANs to one closet. c. MISTP 802.1W
c. Use HSRP. d. VSS
d. Use GLBP.
e. Use VLAN spanning to speed convergence of STP. 54. Which Cisco STP Toolkit mechanisms are recommended on user access ports?
f. Use Layer 3 routing to the core. a. PortFast
g. Summarize routes. b. RootGuard
h. Use RPVST + as the STP with multilayer switches. c. UplinkFast
d. Loop Guard
49. Which are three best practices used in the core layer? e. BPDU Guard
a. Use routing with no Layer 2 loops.
b. Limit VLANs to one closet. 55. You want to enable physical device virtualization. Which feature provides that?
c. Use HSRP. a. VLAN
d. Use GLBP. b. VFR
e. Use Layer 3 switches with fast forwarding. c. VSS
f. Use Layer 3 routing to the core. d. VPN
g. Use two equal-cost paths to every destination network.
h. Use RPVST + as the STP with multilayer switches. 56. A network has two distribution switches, A and B, connected via Layer 2 trunk.
Distribution A switch is the HSRP active gateway and STP root. Layer 2 links are used to
50. Which requirements drive the use of VLANs in a network? connect access layer switches to both distribution switches. Which version of spanning
a. Use of non-Cisco equipment tree is recommended?
b. Separation of broadcast domains and prevention of traffic between departments a. PVST +
c. Use of CCTV multicast traffic b. Rapid PVST +
d. The company budget c. MST
d. VSS
51. What is a major requirement if you use a Layer 3 access layer design?
a. The distribution switches are configured as a VSS pair. 57. A network has two distribution switches, A and B, connected via a Layer 2 trunk.
b. The core switches need to support EIGRP. Distribution A switch is the STP root and distribution B is the active HSRP gateway.
c. The access layer switch needs to be able to route. Layer 2 links are used to connect access layer switches to both distribution switches.
d. HSRP is configured on the distribution switches. Which statement is true?
a. Traffic will transit from the access switches through distribution switch A through the Layer 2
trunk to distribution switch B.
b. An STP loop will be created.
c. The access switches will not be able to communicate.
d. Loop Guard will prevent the loop from being created. 6. What services option provides an effective way to address firewall policy enforcement
in a Cisco Catalyst 6500 series switch?
a. IPS
PART 2. CHAPTER 4. DATA CENTER DESING b. ASA SM
c. Nexus 1000V
Data Center Architecture: User Services ( Email, File, Sharing, etc..), Data center Services d. VDCs
(Security, IPS, Load Balancing), Data Center Foundation (Network, Compute, Storage).
7. What has enabled applications to no longer be bound to bare-metal hardware
1. Which data center architecture layer involves security, IPS, and load balancing? resources?
a. User services a. Unified fabric
b. Data center services b. Device virtualization
c. Data center foundation c. Network virtualization
d. Data Center Interconnect d. Server virtualization

2. What Cisco Nexus switch helps deliver visibility and policy control for virtual machines 8. Which of the following supports network virtualization technology that allows two
(VM)? physical Cisco Catalyst 6500 series switches to act as a single logical virtual switch?
a. Nexus 7000 a. VN-Link technology
b. Nexus 4000 b. Unified fabric
c. Nexus 2000 c. Virtual Switching System (VSS)
d. Nexus 1000V d. Virtual routing and forwarding (VRF)

3. Which of the following is a network adapter that can run at 10GE and support Fibre 9. What enables the spanning-tree topology to appear loop-free although multiple
Channel over Ethernet (FCoE)? redundant paths that are present in the physical topology?
a. CNA (Converged networks adapters) a. vPC
b. VN-Link b. VRF
c. MDS c. Rapid PVST +
d. NAS d. VDC

4. What is an innovative next-generation data center platform that converges computing, 10. Which of the following are data center core layer characteristics? (Select all that
network, storage, and virtualization all together into one system? (Select the best apply.)
answer.) a. 10 and 40GE
a. Cisco MDS b. High-latency switching
b. Cisco Nexus 7000 c. Distributed forwarding architecture
c. Cisco Nexus 5000 d. Service modules
d. Cisco UCS
11. Which data center layer provides advanced application and security services and has
5. Which of the following Cisco Nexus switches support virtual device contexts (VDCs)? a large STP processing load?
a. Cisco Nexus 7000 a. Data center access layer
b. Cisco Nexus 2000 b. Data center aggregation layer
c. Cisco Nexus 5000 c. Data center services layer
d. Cisco Nexus 4000 d. Data center core layer
12. Which of the following are drivers for the data center core layer? (Select all that 18. What network load-balancing option does not work with TCP?
apply.) a. DNS based
a. Future growth b. Anycast based
b. 10 and 40 Gigabit Ethernet density c. Dedicated L4-7 load balancer
c. Services edge d CMP. E
d. Administrative domains and policies
19. What involves the creation of independent logical paths over a shared network
13. Benefits such as port density for server farms, high-performance low-latency Layer 2 infrastructure?
switching, and a mix of oversubscription requirements belong to which data center a. Access control
layer? b. Services edge
a. Core c. Path isolation
b. Distribution d. Device context
c. Access
d. Aggregation 20. What Nexus technology allows for a physical grouping of copper or fiber switch ports
that uplinks to a parent switch such as Nexus 5K or 7K?
14. Cable management is affected by which of the following? (Select all that apply.) a. ASA SM
a. Alternative cooling technologies b. Nexus 1000v
b. Number of connections c. VSS
c. Media selection d. FEX
d. Increase in the number of HVAC units

15. Which of the following best describes how cold and hot aisles should be
arranged in the data center?
a. Hot and cold aisles facing each other
b. Alternating pattern of cold and hot aisles
c. Nonalternating pattern of hot and cold aisles
d. None of the above

16. Within the unified computing resources, what defines the identity of the server?
a. Virtualization
b. Unified fabric
c. Services profile
d. Virtual machines

17. What DCI technology allows one to extend L2 over any IP network?
a. VPLS
b. MPLS VPN
c. OTV
d. VPWS
PART 2. CHAPTER 5. WIRELESS LAN DESING 11. How many access points are supported in a mobility group using Cisco series WLCs?
a. 144
b. 1200
1. What is the maximum data rate of IEEE 802.11ac Wave 1? c. 2400
1.32 Gbps d. 7200

2. What is the typical data rate of IEEE 802.11n? 12. What is the recommended number of data devices an AP can support for best
200Mbps performance?
a. About 6
3. What are some difficulties with having to manage hundreds of standalone APs? b. 7 to 8
SSIDs, frequency channels and power setting of each AP. c. 10 to 15
d. About 20
4. What standard does IEEE 802.11i use for confidentiality, integrity, and authentication?
AES (Advanced Encryption Standard) 13. What is the recommended number of VoWLAN devices an AP can support for best
performance?
5. List at least four benefits of Cisco UWN. a. 2 to 3
Visibilidad y control, gestin RF dinmica, Seguridad, Movilidad, Aumenta la productividad b. 7 to 8
c. 10 to 15
6. True or false: With split-MAC, the control and data frames are load-balanced between d. About 20
the LAP and the WLC.
14. What method is used to manage radio frequency channels and power configuration?
7. True or false: With split-MAC, the WLC, not the LAP, is responsible for authentication a. WLC
and key management. b. WCS
c. RRM
8. What CAPWAP transport mode is the preferred and most scalable? d. MAP
a. Intra
b. Layer 2 15. What is the typical latency per wireless mesh hop in milliseconds?
c. Layer 3 a. 1 to 3
d. EoIP b. 7 to 8
c. 10 to 15
9. What is the preferred intercontroller roaming option? d. About 20
a. Intra
b. Layer 2 16. What is the recommended maximum RTT between an AP and the WLC?
c. Layer 3 a. 20 ms
d. EoIP b. 50 ms
c. 100 ms
10. What device places user traffic on the appropriate VLAN? d. 300 ms
a. LAP
b. WLAN controller 17. What is the recommended controller redundancy technique?
c. MAP a. N + 1 + N
d. RAP b. Static
c. Dynamic
d. Deterministic 24. Match each roaming technique with its client database entry change.
i. Intracluster roaming - b. The client entry is updated on the same WLC
18. What is the recommended best practice for guest services? ii. Layer 2 intercluster roaming a. The client entry is moved to a new WLC
a. Use separate VLANs. iii. Layer 3 intercluster roaming - c. The client entry is copied to a new WLC.
b. Use separate routers and access lists.
c. Obtain a DSL connection and bridge to the local LAN. 25. Match each UDP port with its protocol.
d. Use EoIP to isolate traffic to the DMZ. i. LWAPP data - b. UDP 12222
ii. RF group 802.11b/ g - a. UDP 12114
19. What is the recommended best practice for branch WLANs? iii. WLC encrypted exchange - g. UDP 16667
a. Use H-REAP with centralized controllers. iv. LWAPP control - e. UDP 12223
b. Use local-MAP. v. WLC unencrypted exchange - f. UDP 16666
c. Use wireless mesh design. vi. CAPWAP control - c. UDP 5246
d. Use EoIP. vii. CAPWAP data - d. UDP 5247

20. What are two recommended best practices for WLC design? 26. Match each wireless mesh component with its description.
a. Maximize intercontroller roaming. i. WCS c. Networkwide configuration and management
b. Minimize intercontroller roaming. ii. WLC - d. Links APs to the wired network
c. Use distributed controller placement. iii. RAP a. Root of the mesh network
d. Use centralized controller placement. iv. MAP - b. Remote APs

21. How many APs does the Cisco 6500 WLC module support? 27. How many MAP nodes are recommended per rooftop AP?
a. 6 a. 6
b. 50 b. 20
c. 100 c. 500
d. 300 d. 100

22. Match each access point mode with its description: 28. Which of the following shows the correct order of the steps in an RF site survey?
i. Local - d. Default mode a. Define requirements, document findings, perform the survey, determine preliminary AP
ii. REAP - e. Management across the WAN locations, identify coverage areas.
iii. Monitor - a. For location-based services b. Define requirements, perform the survey, determine preliminary AP locations, identify
iv. Rogue detector - f. Monitors rogue APs coverage areas, document findings.
v. Sniffer - b. Captures packets c. Identify coverage areas, define requirements, determine preliminary AP locations, perform the
vi. Bridge - c. For point-to-point connections survey, document findings.
d. Define requirements, identify coverage areas, determine preliminary AP locations, perform
23. Match each WLC interface type with its description. the survey, document findings.
i. Management - e. In-band management
ii. Service port - d. Out-of-band management 29. What technique performs dynamic channel assignment, power control, and
iii. AP manager - c. Discovery and association interference detection and avoidance?
iv. Dynamic - b. Analogous to user VLANs a. CAPWAP
v. Virtual - a. Authentication and mobility b. RRM
c. Mobility
d. LEAP
35. Which statement is true regarding wireless QoS?
30. What are the three nonoverlapping channels of IEEE 802.11b/ g/ n? a. When the WLC receives a packet from the wired network, it copies the 802.1e value to the
a. Channels A, D, and G DSCP value of the CAPWAP header.
b. Channels 1, 6, and 11 b. When the WLC receives a packet from the wired network, it copies the DSCP value to the
c. Channels 3, 8, and 11 DSCP value of the CAPWAP header.
d. Channels A, E, and G c. When the WLC receives a packet from the wired network, it copies the 802.1e value to the
802.1p value of the CAPWAP header.
31. Which of the following statements is true? d. When the WLC receives a packet from the wireless network, it copies the 802.1e value to the
a. IEEE 802.11g is backward compatible with 802.11b; 802.11a is not compatible with 802.11b. DSCP value of the CAPWAP header.
b. IEEE 802.11a is backward compatible with 802.11b; 802.11g is not compatible with 802.11b.
c. IEEE 802.11b is backward compatible with 802.11a; 802.11g is not compatible with 802.11b. 36. Which two of the following statements represent a preferred split-MAC LWAPP
d. IEEE 802.11n is backward compatible with 802.11a and 802.11g. implementation? (Select two.)
a. IEEE 802.1Q trunking extends from the wired infrastructure to a WLAN controller. Then the
32. What is necessary when you use H-LEAP for authentication? 802.1Q packet is encapsulated in CAPWAP or LWAPP and sent to the access point for
a. WLC transmission over the SSID.
b. WCS b. Each wireless client authentication type maps to a unique SSID, which in turn maps to a
c. RADIUS server common shared VLAN.
d. LAP c. 802.1Q trunking extends from the wired infrastructure to the access point for translation into
SSIDs.
33. A LAP is added to a network. What sequence accurately reflects the process it will d. Each wireless client authentication type maps to a unique SSID, which in turn maps to a
use to associate with the WLAN controller? unique VLAN.
a. First master, secondary, tertiary, greatest AP capacity e. 802.1Q trunking extends from the wired infrastructure to a WLAN controller for translation into
b. Primary, secondary, tertiary, greatest AP capacity, master SSIDs.
c. Primary, secondary, tertiary, master, greatest AP capacity
d. Greatest AP capacity, primary, secondary, master 37. Which two of the following are required for Cisco wireless client mobility
deployment?
34. A LAP is added to a network that is in a separate IP subnet from the WLAN controller. a. Matching security
OTAP has not been enabled. Which two methods can be used by the LAP to find the b. Matching mobility group name
WLAN controller? c. Matching RF channel
a. DHCP d. Matching RF group name
b. Primary, secondary, tertiary, greatest AP capacity, master e. Matching RF power
c. Primary, secondary, tertiary, master, greatest AP capacity f. Assigned master controller
d. Greatest AP capacity, primary, secondary, master
e. DNS 38. Which of the following describe best practices for Cisco outdoor wireless mesh
f. Local subnet broadcast networks? (Select three.)
a. RAP implemented with 20 or fewer MAP nodes
b. RAP implemented with 20 to 32 MAP nodes
c. Mesh hop counts of four or fewer
d. Mesh hop counts of eight to four
e. Client access via 802.11b/ g and backhaul with 802.11a
f. Client access via 802.11a and backhaul with 802.11b/ g
39. Which of the following describe best practices for Cisco WLAN guest access? (Select PART 2. CHAPTER 6. WAN TECHNOLOGIES AND THE ENTERPRISE
two.) EDGE.
a. Guest tunnels have limitations on which wireless controllers can originate the tunnel.
b. Guest tunnels have limitations on which wireless controllers can terminate the tunnel. 1. When using PBM design methodology, what should a network designer do after
c. Dedicated guest VLANs are only extended to the wireless controllers in the network to ensure identifying the customer requirements?
path isolation. a. Design the network topology.
d. Dedicated guest VLANs are extended throughout the network to the access points for path b. Design a test network.
isolation. c. Plan the implementation.
e. Dedicated guest access in the DMZ extends from the origination to the termination controllers d. Characterize the existing network.
without dedicated guest VLANs.
f. Guest tunnels can originate and terminate on any wireless controller platform. 2. Which module is within the enterprise edge module?
a. Data center module
40. How are WLANs identified? b. Campus core
a. MAC addresses c. Building distribution
b. IP subnet d. Remote access VPN module
c. SSID
d. WEP key 3. What WAN technology is most cost effective and suitable for the telecommuter?
e. LAN ports a. MPLS
f. Secure encryption key b. Dark fiber
c. ISDN
41. Which description is correct regarding wireless solutions that provide higher d. DSL
bandwidth than point-to-multipoint (p2mp) wireless?
a. P2p links tend to be slower than p2mp. 4. What two modules are found in the enterprise edge?
b. P2mp wireless connections can provide up to 1.544 Mbps of raw bandwidth. a. Campus core
c. P2p wireless connections can provide up to 44 Mbps of raw bandwidth. b. Building access
d. P2mp links tend to be faster than p2mp. c. Internet
d. DMZ
42. Which WLAN attributes should be considered during a site survey? (Select two.)
a. Channels 5. Which of the following statements best describes window size for good throughput?
b. Power a. A large window size reduces the number of acknowledgments.
c. SSID b. A small window size reduces the number of acknowledgments.
d. Network name c. A small window size provides better performance.
e. Authentication d. None of the above.
f. Encryption
6. What is the default queuing mechanism for router interfaces below 2.0 Mbps?
43. Which WLC interfaces are mandatory? (Select all that apply.) a. Traffic shaping
a. Management b. WFQ
b. AP manager c. CBWFQ
c. Dynamic d. LLQ
d. Virtual
e. Service port
f. Extended
7. Which of the following best describe the PBM design methodology? (Select three.) 14. What WAN technology allows the enterprise to control framing?
a. Analyze the network requirements. a. Cable
b. Characterize the existing network. b. Wireless
c. Implement the network management. c. DWDM
d. Design the network topology. d. Dark fiber

8. Which of the following modules belongs in the enterprise edge? 15. Which QoS method uses a strict PQ in addition to modular traffic classes?
a. Building distribution a. CBWFQ
b. Campus core b. Policing
c. Network management c. WFQ
d. DMZ/ e-commerce d. LLQ

9. Which network module connects to ISPs in the enterprise edge? 16. A T1 TDM circuit uses how many timeslots?
a. Building distribution 24 Ts
b. Campus core
c. WAN edge 17. Which wireless implementation is designed to connect two wireless networks in
d. Service provider edge different buildings?
a. Mobile wireless
10. Which network module connects using the MPLS connectivity? b. GPRS
a. Remote access VPN c. Bridge wireless
b. Campus core d. UMTS
c. Building access
d. WAN edge 18. What improves the utilization of optical-fiber strands?
DWDM.
11. Which network module connects using Frame Relay or ATM?
a. Remote access VPN 19. On the ISP side of a cable provider, cable modems connect to what system?
b. WAN edge CMTS (Cable Modem Termination System)
c. Building distribution
d. Server farm 20. If Frame Relay, ATM, and SONET technologies are used, what enterprise network
module would they connect to?
12. During which part of the PBM design methodology does implementation planning a. WAN/ MAN
occur? b. VPN/ remote access
a. Analyze the network requirements. c. Internet
b. Design the topology. d. DMZ/ e-commerce
c. Characterize the existing network.
d. None of the above. 21. What protocol describes data-over-cable procedures that the equipment must
support?
13. What functional area provides connectivity between the central site and remote sites? DOCSIS (Data Over Cable Service Interface Specifications)
a. Access
b. Campus core
c. Building distribution
d. WAN edge
22. Into what WAN technology category does ISDN fit? 4. Which two of the following best describe WAN backup over the Internet deployments?
a. Cell switched a. Private WAN
b. UTMS switched b. Redundancy for primary WAN connection
c. Circuit switched c. VPLS
d. Packet switched d. Best-effort performance

23. What do service providers use to define their service offerings at different levels? 5. Which of the following provides an L2 connection over an MPLS network?
a. SWAN a. MPLS VPN
b. WAN tiers b. VPLS
c. WWAN c. GETVPN
d. SLA d. None of the above

24. When is it appropriate to use various queuing solutions? 6. What are three types of WAN topologies that can be used with Cisco enterprise
a. The WAN has frequent congestion problems. architectures in the WAN?
b. The WAN occasionally becomes congested. a. Ring
c. The WAN is consistently at 50 percent utilized. b. Full mesh
d. The WAN is consistently at 40 percent utilized. c. Partial mesh
d. Hub and spoke

PART 2. CHAPTER 7. WAN DESING 7. The service provider plays an active role in enterprise routing with what kind of VPNs?
a. Leased lines
1. What type of WAN technology provides a dedicated connection from the service b. MPLS L3 VPN
provider? c. VPLS
a. Circuit-switched data connection d. Enterprise VPN over the Internet
b. Leased lines
c. Packet switched 8. Which WAN backup option uses load sharing in addition to providing backup
d. Cell switched services?
a. Secondary WAN link
2. What type of topology suffers from a single point of failure? b. IPsec tunnel Backup link
a. Hub-and-spoke topology c. VRF stitching
b. Full-mesh topology d. VLANs
c. Partial-mesh topology
d. None of the above 9. Which of the following best describes the difference between a small branch and a
medium branch?
3. What kind of topology requires that each site be connected to every other site in the a. Small branches use dual external switches.
cloud? b. Medium branches use a single ASA firewall.
a. Hub-and-spoke topology c. Small branches use a single ASA firewall.
b. Full-mesh topology d. Medium branches use dual routers and dual external L2 switches.
c. Partial-mesh topology
d. All of the above
10. How many users are supported in a large branch design? 17. What branch design uses ASA firewalls?
a. Up to 50 a. Small branch
b. Between 50 to 100 b. Medium branch
c. Between 100 to 1000 c. Large branch
d. Between 200 to 5000 d. Secure branch

11. What two methods are used to enable private networks over public networks? 18. What WAN/ MAN architecture is usually reserved for large enterprises that are willing
a. IPsec to make substantial investments in equipment and training?
b. PKI a. Private WAN
c. DMVPN b. Private WAN with self-deployed MPLS
d. PSTN c. ISP service
d. SP MPLS/ IP VPN
12. What is not a factor for WAN architecture selection?
a. Ease of management 19. Match each branch profile design with its description.
b. Ongoing expenses i. Single access router - a. Small branch
c. Spanning-tree inconsistencies ii. Cable modem/ router - d. Enterprise teleworker
d. High availability iii. Pair of access routers - b. Medium branch
iv. Pair of firewalls - c. Large branch
13. Which Layer 3 tunneling technique enables basic IP VPNs without encryption?
a. GRE
b. IPsec PART 3. CHAPTER 8. INTERNET PROTOCOL VERSION 4 DESING
c. HMAC
d. IKE 1. List the RFC 1918 private address ranges.

14. Which of the following is not recommended for designing WANs? 2. True or false: You can use DHCP to specify the TFTP hosts IP address to a client PC.
a. Analyze customer requirements.
b. Characterize the existing network. 3. True or false: 255.255.255.248 and /28 are two representations of the same IP mask.
c. Design the new WAN.
d. Implement the new WAN. 4. True or false: Upper-layer protocols are identified in the IP headers protocol field. TCP
is protocol 6, and UDP is protocol 17.
15. What WAN architecture uses the Internet with site-to-site VPNs?
a. Private WAN 5. Fill in the blank: Without any options, the IP header is __32__ bytes in length.
b. ISP service
c. SP MPLS/ IP VPN 6. The IP headers ToS field is redefined as the DS field. How many bits does DSCP use
d. Private WAN with self-deployed MPLS for packet classification, and how many levels of classification are possible?
8 BIT
16. Which WAN backup method does not typically use the Internet as a transport?
a. IPsec tunnel 7. True or false: NAT uses different IP addresses for translations. PAT uses different port
b. GRE tunnel numbers to identify translations.
c. DMVPN
d. GETVPN 8. True or false: The IP headers header checksum field performs the checksum of the IP
header and data.
b. Only the first router in the network can fragment IPv4 packets.
9. Calculate the subnet, the address range within the subnet, and the subnet broadcast of c. IPv4 packets cannot be fragmented.
the address 172.56.5.245/ 22. d. IPv4 packets are fragmented and reassembled at each link through the network.
172.56.4.0.1 172.56.7.254, Broadcast add: 172.56.7.255
17. A packet sent to a multicast address reaches what destinations?
10. When packets are fragmented at the network layer, where are the fragments a. The nearest destination in a set of hosts.
reassembled? b. All destinations in a set of hosts.
c. Broadcasts to all hosts.
11. Which protocol can you use to configure a default gateway setting on a host? d. Reserved global destinations.
a. ARP
b. DHCP 18. What are three types of IPv4 addresses?
c. DNS a. Anycast
d. RARP b. Multicast
c. Dynamic
12. How many host addresses are available with a Class B network with the default d. Broadcast
mask? e. Unicast
a. 63,998 f. Global
b. 64,000 g. Static
c. 65,534
d. 65,536 19. Which devices should be assigned an IP address dynamically? (Select three.)
a. Cisco IP phones
13. Which of the following is a dotted-decimal representation of a /26 prefix mask? b. LAN switches
a. 255.255.255.128 c. Workstations
b. 255.255.255.192 d. Mobile devices
c. 255.255.255.224 e. Routers
d. 255.255.255.252
20. Which name resolution method reduces administrative overhead?
14. Which network and mask summarize both the 192.170.20.16/ 30 and 192.170.20.20/ 30 a. Static name resolution
networks? b. Dynamic name resolution
a. 192.170.20.0/ 24 c. DHCP name resolution
b. 192.170.20.20/ 28 d. Host.txt name resolution
c. 192.170.20.16/ 29
d. 192.170.20.0/ 30 21. How many hosts can be addressed with the following IPv4 subnet: 172.30.192.240/
28?
15. Which AF class is backward compatible with IP precedence bits flash traffic? a. 6
a. AF2 b. 14
b. AF3 c. 126
c. AF4 d. 1024
d. EF
22. What is the smallest subnet and mask that can be used in a DMZ network that needs
16. Which of the following is true about fragmentation? to have only three hosts?
a. Routers between source and destination hosts can fragment IPv4 packets. a. 192.168.10.32/ 30
b. 192.168.10.32/ 29
c. 192.168.10.32/ 28 28. Which regional registry allocates address blocks in China?
d. 192.168.10.32/ 27 a. IANA
b. RIPE
23. Which modules cannot use private IPv4 address space? (Select all that apply.) c. ARIN
a. Access d. APNIC
b. Distribution e. LACNIC
c. Core d. AFRINIC
d. E-commerce
e. LAN 34. What mechanism supports the ability to divide a given subnet into smaller subnets
f. WAN based on need?
g. Internet Connection a. DNS
h. Data Center b. NAT
i. Remote Access/ VPN c. ARP
d. VLSM
24. Which technology allows a company to use a single public IP address when using
private IPv4 addresses in the internal LAN?
a. NAT PART 3. CHAPTER 9. INTERNET PROTOCOL VERSION 6 DESING
b. Redistribution
c. PAT 1. True or false: OSPFv2 supports IPv6.
d. Access list
2. True or false: DNS AAAA records are used in IPv6 networks for name-to-IPv6-address
25. Which of the following is the European RIR? resolution.
a. IANA
b. ARIN 3. Fill in the blank: IPv6 ND is similar to what _______ does for IPv4 networks.
c. RIPE IPv6 Neighbor Discover is IPv4 Address Resolution Protocol
d. ERIR
4. How many bits are there between the colons of IPv6 addresses?
26. Which technology allows you to divide address blocks into subnets of different 16
sizes?
a. NAT 5. The first field of the IPv6 header is 4 bits in length. What binary number is it always set
b. VLSM to?
c. PAT 0110 (6)
d. Variable division subnet masks
6. True or false: DHCP is required for dynamic allocation of IPv6 addresses.
27. Which regional registry allocates address blocks in North America?
a. IANA 7. IPv6 multicast addresses begin with what hexadecimal numbers?
b. RIPE 0xFF
c. ARIN
d. APNIC 8. IPv6 link-local addresses begin with what hexadecimal prefix?
e. LACNIC FE8/10
d. AFRINIC
9. True or false: ISATAP allows tunneling of IPv6 through IPv4 networks. c. The IPv6 stack makes a determination. If the destination is IPv4, the packet is sent to the IPv4
stack.
10. List the eight fields of the IPv6 header. d. The IPv4 stack makes a determination. If the destination is IPv6, the packet is sent to the
Version, Traffic class, Flow Label, Payload Length, Nex header, Next Hop Limit, IPv6 Source IPv6 stack.
Address, IPv6 Destination Address.
19. What protocol numbers are used by Ethernet to identify IPv4 versus IPv6?
11. Which of the following is not an IPv6 address type? a. Protocol 6 for IPv4 and protocol 17 for IPv6.
a. Unicast b. 0x86DD for IPv6 and 0x0800 for IPv4.
b. Broadcast c. 0x8000 for IPv4 and 0x86DD for IPv6.
c. Anycast d. 0x0800 for both IPv4 and IPv6; they are identified in the packet layer.
d. Multicast
20. Which of the following describe the IPv6 header? (Select two.)
12. True or false: The IPv6 address 2001: 0: 0: 1234: 0: 0: 0: abcd can be represented as a. It is 40 bytes in length.
2001:: 1234: 0: 0: 0: abcd and 2001: 0: 0: 1234:: abcd. b. It is of variable length.
c. The Protocol Number field describes the upper-layer protocol.
13. What is the subnet prefix of 2001: 1: 0: ab0: 34: ab1: 0: 1/ 64? d. The Next Header field describes the upper-layer protocol.
2001:1:0:ab0::/64
21. Which of the following is true about fragmentation?
14. The IPv6 address has 128 bits. How many hexadecimal numbers does an IPv6 a. Routers between source and destination hosts can fragment IPv4 and IPv6 packets.
address have? b. Routers between source and destination hosts cannot fragment IPv4 and IPv6 packets.
32 c. Routers between source and destination hosts can fragment IPv6 packets only. IPv4 packets
cannot be fragmented.
15. What type of IPv6 address is the following? FF01: 0: 0: 0: 0: 0: 0: 2 d. Routers between source and destination hosts can fragment IPv4 packets only. IPv6 packets
Multicast Address node local cannot be fragmented.

16. What is the compact format of the address 2102: 0010: 0000: 0000: 0000: fc23: 0100: 22. A packet sent to an anycast address reaches what?
00ab? a. The nearest destination in a set of hosts
a. 2102: 10:: fc23: 01: ab b. All destinations in a set of hosts
b. 2102: 001:: fc23: 01: ab c. Broadcasts to all hosts
c. 2102: 10:: fc23: 100: ab d. Global unicast destinations
d. 2102: 0010:: fc23: 01: ab
23. Which of the following is/ are true about IPv6 and IPv4 headers?
17. When using the dual-stack backbone, which of the following statements is correct? a. The IPv6 header is of fixed length, and the Next Header field describes the upper-layer
a. The backbone routers have IPv4/ IPv6 dual stacks, and end hosts do not. protocol.
b. The end hosts have IPv4/ IPv6 dual stacks, and backbone routers do not. b. The IPv4 header is of variable length, and the Protocol field describes the upper-layer
c. Both the backbone routers and end hosts have IPv4/ IPv6 dual stacks. protocol.
d. Neither the backbone routers nor end hosts have IPv4/ IPv6 dual stacks. c. The IPv6 header is of fixed length, and the Protocol field describes the upper-layer protocol.
d. A and B
18. How does a dual-stack host know which stack to use to reach a destination? e. B and C
a. It performs an ND, which returns the destination host type.
b. It performs a DNS request that returns the IP address. If the returned address is IPv4, the
host uses the IPv4 stack. If the returned address is IPv6, the host uses the IPv6 stack.
24. An organization uses an IPv6 address range that it received from its ISP. The IPv6 29. What is the hierarchy for IPv6 aggregatable addresses?
addresses will be used internally, and employees will access the Internet using Port a. Global, site, loop
Address Translation. What is required for DNS? b. Public, site, interface
a. DNS servers need to support only IPv4 addresses. c. Internet, site, interface
b. DNS servers need to support only IPv6 addresses. d. Multicast, anycast, unicast
c. No changes are needed to the DNS servers.
d. DNS servers need to support both IPv4 and IPv6 addresses. 30. NAT-PT translates between what address types?
e. Additional DNS servers for IPv6 addresses are needed. a. Translates RFC 1918 private addresses to public IPv4 addresses
f. DNS servers are not needed for PAT. b. Translates between IPv4 and IPv6 addresses
c. Translates between network addresses and IPv6 ports
25. Which statements about IPv6 addresses are true? (Select two.) d. Translates between private IPv6 addresses to public IPv6 addresses
a. Leading 0s are required.
b. Two colons (::) are used to separate fields. 31. In a network where IPv6 exists within an IPv4 network, which two strategies allow
c. Two colons (::) are used to represent successive hexadecimal fields of 0s. both schemes to coexist? (Select two.)
d. A single interface will have multiple IPv6 addresses of different types. a. Translate between the protocols.
b. Hosts run IPv4 and routers run native IPv6.
26. You have duplicate file servers at multiple locations. Which IPv6 address type allows c. Encapsulate IPv6 packets into IPv4 packets.
each end station to send a request to the nearest file server using the same destination d. Enable anycast in the routing protocol.
address, regardless of the location of that end station? e. Redistribute between the IPv4 and IPv6 networks.
a. Anycast
b. Broadcast 32. Which IPv6 feature enables routing to distribute connection requests to the nearest
c. Unicast content server?
d. Global unicast a. Anycast
e. Multicast b. Link-local
c. Aggregatable
27. Which strategy allows both IPv4 and IPv6 addressing/ stacks to coexist on a host to d. Multicast
facilitate a migration? e. Site-local
a. Deploy NAT-PT between the networks.
b. Hosts run IPv4 and routers run native IPv6. 33. Which statement best describes the efficiency of the IPv6 header?
c. Enable anycast in the routing protocol. a. It is less efficient than the IPv4 header.
d. Run both IPv4 and IPv6 address stacks on devices. b. It has the same efficiency as the IPv4 header; the larger IPv6 address makes it faster.
e. Redistribute between the IPv4 and IPv6 networks. c. It is more efficient than the IPv4 header.
d. It is larger than the IPv4 header.
28. Which strategy would be most flexible for a corporation with the following
characteristics? 2,400,000 hosts 11,000 routers Internet connectivity High volume of 34. What does one-to-nearest communication mean for IPv6?
traffic with customers and business partners a. Anycast
a. Deploy NAT-PT between business and Internet networks. b. Broadcast
b. Hosts run IPv4 and routers run native IPv6. c. Multicast
c. Both hosts and routers run dual stack. d. Unicast
d. Enable anycast in the routing protocol.
e. Redistribute between the IPv4 and IPv6 networks.
35. Which tunneling protocol allows dual-stack hosts to tunnel over IPv4 network that is 41. Which are transition models to IPv6 for an enterprise network?
not multicast enabled? a. Dual-stack
a. 6to4 b. Top-down
b. 6over4 c. Tunneled
c. IPsec d. Service block
d. ISATAP e. Translation
f. Fork-lift
36. How would you summarize the networks listed below? 2001: 0db8: 2a3e: 4490::/ 64 g. Hybrid
2001: 0db8: 2a3e: 4a1b::/ 64 2001: 0db8: 2a3e: 4ff2::/ 64 2001: 0db8: 2a3e: 4c5b::/ 64
a. 2001: 0db8: 2a3e: 4000::/ 52 42. Which are deployment models to IPv6 for an enterprise network?
b. 2001: 0db8: 2a3e: 4000::/ 56 a. Dual-stack
c. 2001: 0db8: 2a3e: 4000::/ 60 b. Top-down
d. 2001: 0db8: 2a3e: 4000::/ 64 c. Tunneled
d. Service block
37. Select the statement that is true about IPv6 address assignment. e. Translation
a. Configure devices manually using IPv6 address assignment. f. Fork-lift
b. Configure servers using SLAAC. g. Hybrid
c. Use SLAAC to assign IPv6 addresses and then DHCPv6 to assign additional information to
hosts. 43. If an application uses broadcast traffic for IPv4, how will it communicate using IPv6?
d. You cannot use DHCPv6 after a host is assigned an IPv6 via SLAAC. a. Anycast
b. Broadcast
38. Which IPv6 feature allows a single node to send packets that are routed to the nearest c. Multicast
receiver from a group of potential receivers? d. Unicast
a. Link-local
b. Site-local 44. What type of address begins with the following prefix? FC00::/ 7
c. Anycast a. Local-link
d. Multicast b. Broadcast
c. Multicast
39. Which statement is correct? d. Unique local unicast
a. IPv6 does not use multicast addresses.
b. IPv6 routers do not forward packets if the packet has a link-local source address. 45. Which regional registry allocates address blocks in the Middle East?
c. DHCPv6 is the only method for dynamic address assignment. a. IANA
d. IPv6 routers forward packets if the packet has a link-destination address. b. RIPE
c. ARIN
40. Which two link-state routing protocols support IPv6 routing? d. APNIC
a. RIPng e. LACNIC
b. OSPF f. AFRINIC
c. EIGRP
d. IS-IS
e. BGP4 +
PART 3. CHAPTER 10. ROUTING PROTOCOL CHARACTERISTICS, RIP, 11. What routing protocol parameter is concerned with how long a packet takes to travel
EIGRP, AND IS-IS from one end to another in the internetwork?
Delay
1. True or false: Link-state routing protocols send periodic routing updates.
12. For what routing protocol metric is the value of a Fast Ethernet interface calculated as
2. True or false: RIPv2 was created to support IPv6. 108/ 108 = 1?

3. True or false: The path with the lowest cost is preferred. 13. Match the loop-prevention technique (numerals) with its description (letters).
i. Split horizon - c. Suppresses a route announcement from which the route was learned
4. True or false: A link with a reliability of 200/ 255 is preferred over a link with a reliability ii. Poison reverse - a. Sends an infinite metric from which the route was learned
of 10/ 255. iii. Triggered updates - d. Sends a route update when a route changes
iv. Counting to infinity - b. Drops a packet when the hop count limit is reached
5. True or false: A link with a load of 200/ 255 is preferred over a link with a load of 10/
255. 14. True or false: Link-state routing protocols are more CPU and memory intensive than
distance-vector routing protocols.
6. On a router, both EIGRP and OSPF have internal routes to 198.168.10.0/ 24. Which
route is injected into the routing table? 15. Which routing protocols would you select if you needed to take advantage of VLSMs?
(Select all that apply.)
7. On a router, both RIPv2 and IS-IS have a route to 198.168.10.0/ 24. Which route is a. RIPv1
injected into the routing table? b. RIPv2
c. IGRP
8. On a router, EIGRP has a route to the destination with a prefix of /28, and OSPF has a d. EIGRP
route to the destination with a prefix of /30. Which is used to reach the destination? e. OSPF
f. IS-IS
9. Which of the following is the best measurement of an interfaces reliability and load?
a. Reliability 255/ 255, load 1/ 255 16. Which standards-based protocol would you select in a large IPv6 network?
b. Reliability 255/ 255, load 255/ 255 a. RIPng
c. Reliability 1/ 255, load 1/ 255 b. OSPFv3
d. Reliability 1/ 255, load 255/ 255 c. EIGRP for IPv6
d. RIPv2
10. Which routing protocols permit an explicit hierarchical topology?
a. BGP 17. Which of the following routing protocols are fast in converging when a change in the
b. EIGRP network occurs? (Select three.)
c. IS-IS a. RIPv1
d. RIP b. RIPv2
e. OSPF c. EIGRP
f. B and D d. OSPF
g. C and E e. IS-IS
f. BGP
18. If you are designing a large corporate network that cannot be designed in a hierarchy, e. RIPv3
which routing protocol would you recommend? f. All of the above g. B and D
a. RIPv1
b. RIPv2 23. Which of the following characteristics are implemented differently between distance-
c. EIGRP vector and link-state routing protocols?
d. OSPF a. IP route tables
e. IS-IS b. Route information distribution
f. BGP c. Routing tables
d. Forwarding of traffic
19. Which routing protocols support VLSMs? (Select all that apply.) e. Verification of route information sources
a. RIPv1 f. Administrative distance
b. RIPv2
c. EIGRP 24. Which two statements are true for IGPs and EGPs?
d. OSPF a. IGPs can be substituted with static routing.
e. IS-IS b. IGPs are better at finding the fastest paths across the network.
f. All of the above c. IGPs must converge quickly, but EGPs do not.
d. IGPs are for inter-autonomous system connections, EGPs are used for intra-autonomous
20. You are connecting your network to an ISP. Which routing protocol would you use to system connections.
exchange routes?
a. RIPv1 25. How is convergence related to routing information?
b. RIPv2 a. The speed of convergence affects the frequency of routing updates.
c. EIGRP b. The faster the convergence, less consistent routing information is produced.
d. OSPF c. The faster the convergence, more consistent routing information is produced.
e. IS-IS d. There is no relation between convergence and routing information consistency.
f. BGP
g. All of the above 26. What is a major advantage of a classless structured network over a classless
network?
21. Which routing protocol requires only Cisco routers on the network? a. There is less overhead in classless networks.
a. RIPv1 b. There is more overhead in classless networks.
b. RIPv2 c. Less IP addresses are used in classful networks.
c. EIGRP d. Classless networks do not have advantages over classful networks.
d. OSPF
e. IS-IS 27. Which two EIGRP features make it appropriate for a companys network?
f. BGP a. Slow convergence
g. All of the above b. VLSM support
c. DUAL
22. Which routing protocol would be supported on an IPv6 network with multiple vendor d. Automatic summarization
routers? e. Multivendor support
a. RIPv2
b. EIGRP for IPv6
c. BGPv6
d. OSPFv3
28. Match the protocol with the characteristic. 34. Which IGP protocol is a common alternative to EIGRP and OSPF as a routing protocol
i. EIGRP for IPv6 - d. Uses multicast FF02:: A for large service provider networks?
ii. RIPv2 - b. Uses multicast 224.0.0.9 a. OSPFv3
iii. RIPng - a. Uses multicast FF02:: 9 b. RIPv2
iv. EIGRP - c. Uses multicast 224.0.0.10 c. BGP4
d. IS-IS
29. A small network is experiencing excessive broadcast traffic and slow response times.
The current routing protocol is RIPv1. What design changes would you recommend? 35. What is the default IS-IS metric for a T1 interface?
a. Migrate to RIPv2. a. 5
b. Migrate to RIPng. b. 10
c. Migrate to EIGRP for IPv4. c. 64
d. Migrate to EIGRPv6. d. 200

30. Match the EIGRP component with its description. 36. In IS-IS networks, the backup designated router (BDR) forms adjacencies to what
i. RTP - b. Used to deliver EIGRP messages reliably routers?
ii. DUAL - d. Guarantees a loop-free network a. Only to the DR.
iii. Protocol-dependent modules - a. An interface between DUAL and IPX RIP, IGRP, and b. To all routers.
AppleTalk c. The BDR only becomes adjacent when the DR is down.
iv. Neighbor discovery - c. Builds an adjacency table d. There is no BDR is IS-IS.

31. Match each EIGRP parameter with its description. 37. Which routing protocol converges most quickly?
i. Feasible distance - c. The lowest calculated metric of a path to reach the destination. a. BGP
ii. Successor - a. The best path selected by DUAL. b. OSPF
iii. Feasible successor - d. The second-best path. c. EIGRP
iv. Active state - b. The successor is down d. RIPv2
e. IS-IS
32. On an IPv6 network, you have RIPng and EIGRP running. Both protocols have a route
to destination 10.1.1.0/ 24. Which route gets injected into the routing table? 38. Which routing protocol allows for unequal cost multipath routing?
a. The RIPng route a. IS-IS
b. The EIGRP route b. OSPF
c. Both routes c. EIGRP
d. Neither route because of a route conflict d. RIPv2

33. Which routing protocol should be used if the network requirements include fastest 39. Which two link-state routing protocols support IPv6?
convergence time and unequal load balancing? a. BGP4
a. BGP b. EIGRP
b. OSPF c. OSPF
c. EIGRP d. RIPng
d. RIPv2 e. IS-IS
40. Select those answers that are characteristics of EIGRP? (Select four.) 46. Loops can cause broadcast storms and congestion. How do distance-vector routing
a. ASN and K values must match to form neighbors protocols handle this? (Select all that apply.)
b. Can use multiple unequal paths a. Counting to infinity
c. Summary routes have an AD of 150. b. Poison reverse
d. External routes have an AD of 170. c. Split horizon
e. Exchanges the full routing table every 60 seconds. d. Vector routing
f. Uses multicast address 224.0.0.10 for updates.
g. Does not support MD5 authentication 47. EIGRP has a route with a metric of 20. There are two feasible successors with metrics
of 35 and 45. If the variance 2 command is invoked, how many active routes are there for
41. A hierarchical design of EIGRP helps with which of the following? (Select two.) this route?
a. Redistribution a. 1.
b. Route summarization b. 2.
c. Faster convergence c. 3.
d. Load balancing d. Variance has to be used for equal-cost routes.

42. Which are design considerations with EIGRP? 48. Which routing protocol has the highest admin distance?
a. The neighbor command is used to enable unicast communication. a. RIP
b. The neighbor command can be used to establish adjacency with non-Cisco routers. b. EIGRP
c. The ASN and K values must match to establish neighbors. c. OSPF
d. Virtual links can be used to establish neighbors over an area. d. IS-IS
e. BGP
43. Which are the two fastest converging routing protocols?
a. IS-IS 49. Which routing protocol has the lowest admin distance?
b. OSPF a. RIP
c. EIGRP b. EIGRP
d. RIPv2 c. OSPF
e. BGP4 d. IS-IS
e. iBGP
44. Which routing protocol uses multicast FF02:: A and Next Header protocol 88?
a. IS-IS for IPv6
b. OSPFv3 PART 3. CHAPTER 11. OSPF, BGP, ROUTE MANIPULATION, AND IP
c. EIGRP for IPv6 MULTICAST
d. RIPng
1. True or false: A router needs to have all its interfaces in Area 0 to be considered an
OSPF backbone router.
45. What is the system ID of the following NET? 49.0001.1900.6500.0001.00
a. 49.0001
2. True or false: OSPF and IS-IS use a designated router in multiaccess networks.
b. 0001.1900.6500
c. 1900.6500.0001
3. Which multicast addresses do OSPFv2 routers use?
d. 0001.00
224.0.0.5
4. Which multicast addresses are used by OSPFv3 routers?
FF02::5 19. What IPv6 multicast address does EIGRP use for IPv6?

5. What is the Cisco administrative distance of OSPF? 20. Match the routing protocol with the description:
110 i. EIGRP
ii. OSPFv2
6. Which OSPFv2 router type generates the OSPF Type 3 LSA? iii. RIPv2
ABR iv. BGP
a. Distance-vector protocol used in the edge of the network b. IETF link-state protocol used in
7. Which OSPFv2 router type generates the OSPF Type 2 LSA? the network core c. Hybrid protocol used in the network core d. Path-vector protocol

21. What is the default OSPF cost for a Fast Ethernet interface?
8. What is included in an OSPFv2 router LSA?
22. Which routing protocol do you use in the core of a large enterprise network that
supports VLSMs for a network with a mix of Cisco and non-Cisco routers?
9. True or false: The router with the lowest priority is selected as the OSPF DR.
23. What is the benefit of designing for stub areas?
10. True or false: You use iBGP to exchange routes between different autonomous
systems. 24. What constraint does the OSPF network design have for traffic traveling between
areas?
11. True or false: BGP Version 4 does not include support for CIDR, only OSPF and
EIGRP do. 25. How is OSPFv3 identified as the upper-layer protocol in IPv6?

12. True or false: eBGP and iBGP redistribute automatically on a router if the BGP peers 26. Which routing protocols are recommended for large enterprise networks?
are configured with the same autonomous system number. a. RIPv2
b. OSPFv2
13. eBGP routes have an administrative distance of ____, and iBGP routes have an c. EIGRP
administrative distance of ___. d. IS-IS
e. A and B
14. True or false: IGMP snooping and CGMP are methods to reduce the multicast traffic at f. B and C
Layer 2. g. B and D
h. A, B, C, and D
15. True or false: PIM has a hop-count limit of 32.
27. What OSPFv3 LSA has an LS type of 0x0008?
16. True or false: PIM-SM routers use the multicast 224.0.0.13 address to request a a. Router LSA
multicast group to the RP. b. Inter-area-router LSA
c. Link LSA
17. True or false: Autonomous system path is the only attribute BGP uses to determine d. Intra-area-prefix LSA
the best path to the destination.
28. Which routing protocol does not support VLSMs?
18. List three IP routing protocols that use multicast addresses to communicate with their a. RIPv1
neighbors. b. OSPFv2
c. EIGRP d. RIPv2 i. Local preference
e. B and C ii. MED
f. B, C, and D iii. Autonomous system path
iv. Next hop
29. Which routing protocols have fast convergence for IPv4 networks? a. IP address b. Indicates the path used to exit the autonomous system c. Tells external BGP
a. BGP peers the preferred path into the autonomous system d. List of ASNs
b. OSPFv2
c. EIGRP 37. Which Cisco feature can you use instead of local preference to influence the selected
d. RIPv2 path to external BGP routers?
e. B and C
f. B, C, and D 38. What is the purpose of route reflectors?
g. A, B, and C
39. When BGP confederations are used, which number do external peers see?
30. Which routing protocols have fast convergence for IPv6 networks?
a. RIPng 40. With ____________, all routers peer with each other within the private autonomous system.
b. OSPFv3 With __________, client routers peer only with the reflector.
c. EIGRP for IPv6
d. RIPv2 41. Which of the following shows the correct order that BGP uses to select a best path?
e. MP-BGP a. Origin, lowest IP, autonomous system path, weight, local preference, MED
f. B and C b. Weight, local preference, autonomous system path, origin, MED, lowest IP
g. B, C, and D c. Lowest IP, autonomous system path, origin, weight, MED, local preference
h. B, C, and E d. Weight, origin, local preference, autonomous system path, MED, lowest IP

31. A retail chain has about 800 stores that connect to the headquarters and a backup 42. What feature did BGPv4 implement to provide forwarding of packets based on IP
location. The company wants to limit the amount of routing traffic used on the WAN links. prefixes?
What routing protocol( s) is/ are recommended?
a. RIPv1 43. What route should be used to summarize the following networks? 10.150.80.0/ 23,
b. RIPv2 10.150.82.0/ 24, 10.150.83.0/ 24, 10.150.84.0/ 22
c. OSPFv2 a. 10.150.80.0/ 23, 10.150.82.0/ 23, and 10.150.84.0/ 22
d. EIGRP b. 10.150.80.0/ 22 and 10.150.84/ 22
e. IS-IS f. BGP c. 10.150.80.0/ 21
g. B, C, and D d. 10.150.80.0/ 20
h. C and D
i. C, D, and E 44. Match the IPv6 multicast address with its description. i. FF02:: 1 ii. FF02:: 2 iii. FF02::
5 iv. FF02:: 9 v. FF02:: A
32. Which of the following statements is correct? a. OSPFv3 routers
a. OSPFv3 provides changes to OSPFv2 for use in IPv4 networks. b. RIPng routers
b. OSPFv3 provides changes to OSPFv2 for use in IPv6 networks. c. All routers
c. OSPFv3 provides changes to OSPFv2 for use in IPv6 and IPv4 networks. d. EIGRP routers
d. OSPFng provides changes to OSPFv2 for use in IPv6 networks. e. All nodes

36. Match the BGP attribute with its description.


45. Route summarization and redistribution occur in which layer of the hierarchical a. RIPv2
model? b. OSPF
a. Building access c. EIGRP
b. Distribution d. BGP
c. Core
d. Server access 52. Which of the following statements are true regarding OSPF? (Choose two.)
a. ABRs require manual configuration for summarization.
46. Which of the following best describes route summarization? b. ABRs automatically summarize.
a. Grouping contiguous addresses to advertise a large Class A network c. External routes are injected into the autonomous system via the ABR.
b. Grouping noncontiguous addresses to advertise a larger network c d. External routes are injected into the autonomous system via the ASBR.
. Grouping contiguous addresses to advertise a larger network
d. Grouping Internet addresses 53. Which routing protocol provides multivendor support with high scalability and fast
convergence?
47. Which standards-based routing protocol converges most quickly? a. RIPv2
a. RIPv2 b. OSPF
b. OSPF c. EIGRP
c. EIGRP d. BGP
d. BGP
54. Which routing protocol is recommended for large IPv6 multivendor networks?
48. Which routing protocol( s) do not require subinterfaces when operating over a. RIPng
nonbroadcast multiaccess point-to-multipoint networks? b. OSPFv3
a. RIP c. EIGRP for IPv6
b. OSPF d. BGP
c. EIGRP d. BGP
e. IS-IS 55. As a network designer, you need to influence the outbound routing with your ISP.
Which are BGP options to do this?
49. Which link-state routing protocols support IPv6 routing? a. AS Path, Local Preference, Weight
a. RIP b. MED, Local Preference, Weight c. AS Path, BGP Communities, MED
b. OSPF d. BGP Communities, Local Preference, MED
c. EIGRP
d. BGP 56. As a network designer, you need to influence the inbound routing with your ISP.
e. IS-IS Which are BGP options to do this?
a. AS Path, Local Preference, Weight
50. Which OSPF area allows redistribution of external routers while preventing b. MED, Local Preference, Weight
propagation of Type 5 LSAs? c. AS Path, BGP Communities, MED
a. Area 0 d. BGP Communities, Local Preference, MED
b. Stub area
c. Not so stubby area 57. Which statements are correct? (Choose two.)
d. ABR a. The Dijkstra algorithm is used by both OSPF and IS-IS to calculate the shortest best path.
e. Area 1 over a Virtual Link b. IS-IS is a proprietary protocol. OSPF is a standards-based protocol.
c. OSPF is only used on enterprise networks and IS-IS by service providers.
51. Which protocol is commonly used to connect to an ISP? d. ISIS boundaries are links; OSPF area boundaries are within the routers.
c. Block all TCP traffic from unknown sources.
58. PIM-SM is configured on the network. Which protocol prevents media streams from d. Perform DHCP snooping for the DMZ segment.
being broadcast on the access switch?
a. PIM-SM RD 5. You are a network engineer for ABC Corp. You need to bring your coworkers up to date
b. IGMPv3 on network security threats. What would you discuss with them? (Select all that apply.)
c. Auto-RP a. Reconnaissance and unauthorized access
d. IGMP snooping b. DHCP snooping
c. DMZ security
59. Which protocol is commonly used to connect to an ISP? d. DoS
a. RIPv2
b. OSPF 6. True or false: IPsec can ensure data integrity and confidentiality across the Internet.
c. EIGRP
d. BGP 7. What focuses on the accuracy and controls imposed on a companys financial
records?
a. HIPAA
PART 4. CHAPTER 12. MANAGING SECURITY b. GLBA
c. SOX
1. What technique can be used to protect private information that is transported over the d. EU Data Protection Directive
Internet between the headquarters and branch office? (Select the best answer.)
a. Authentication 8. What are components of managing the security infrastructure? (Select all that apply.)
b. Log all data a. Security management policy
c. Encryption b. Incident-handling policy
d. Accounting c. Network access control policy
d. None of the above
2. What would be recommended to protect database servers connected to or accessible
from the Internet? 9. Which security legislative body calls for the protection of peoples privacy?
a. Firewall a. HIPAA
b. Server load balancing (SLB) b. GLBA
c. Syslog c. EU Data Protection Directive
d. SPAN d. SOX

3. What network security issue does 3DES encryption aim to solve? 10. How can attackers obtain sensitive account information? (Select all that apply.)
a. Data integrity a. Password-cracking utilities
b. User authentication b. Capturing network traffic
c. Data authentication c. Social engineering
d. Data confidentiality d. All of the above

4. Users are reporting a DoS attack in the DMZ. All the servers have been patched, and all 11. What best describes how to protect datas integrity?
unnecessary services have been turned off. What else can you do to alleviate some of the a. System availability
attacks effects? (Select all that apply.) b. Data confidentiality
a. Police traffic on the firewalls ingress. c. Ensuring that only legitimate users can view sensitive data
b. Use ACLs to let only allowed traffic into the network. d. Allowing only authorized users to modify data
19. Match the encryption keys and VPN protocols with their definitions.
12. What provides an audit trail of network activities? i. IPsec
a. Authentication ii. SSL
b. Accounting iii. Shared secret
c. Authorization iv. PKI
d. SSHv1 a. Both sides use the same key.
b. Uses AH and ESP.
13. What authenticates valid DHCP servers to ensure unauthorized host systems are not c. Web browser TCP port 443.
interfering with production systems? d. Asymmetric cryptography.
a. DHCP options
b. ARP inspection 20. What does Cisco recommend as the foundation of any deployed security solution?
c. DHCP snooping a. Customer requirements
d. DHCP reservations b. Security audit
c. SLA policy
14. What contains the organizations procedures, guidelines, and standards? d. Security policy
a. Security policy
b. Acceptable use policy 21. Which of the following protocols are used for IP security?
c. Procedure handling a. SSH and EIGRP
d. Process handling b. BGP and TCP
c. AH and ESP
15. How can you enforce access control? (Select all that apply.) d. SSH and RIP
a. Restrict access using VLANs
b. Restrict access using OS-based controls 22. Which security solution best meets requirements for confidentiality, integrity, and
c. Use encryption techniques authenticity when using the public network such as the Internet?
d. All of the above a. Cisco IOS firewall
b. Intrusion prevention
16. What is a general user document that is written in simple language to describe the c. Secure Services
roles and responsibilities within risk management? d. AAA
a. Security policy e. Traffic Guard Protector
b. Acceptable-use policy
c. Procedure handling 23. What uses security integrated into routers, switches, and appliances to defend
d. Process handling against attacks?
a. Trust and identity management
17. True or false: The network access control policy defines the general access control b. Threat defense
principles used and how data is classified, such as confidential, top secret, or internal. c. Secure Services
d. Cisco SAFE
18. What are the four steps used to facilitate continuing efforts in maintaining security policies? e. Secure firewalling
a. Secure, monitor, maintain, close out
b. Monitor, test, evaluate, purchase 24. Encryption and authentication are used to provide secure transport across untrusted
c. Improve, test, purchase, evaluate networks by providing ________________.
d. Secure, monitor, test, improve a. Trust and identity management
b. Threat defense
c. Secure Services 6. Cisco IOS ______ offers data encryption at the IP packet level using a set of standards-
d. Cisco SAFE based protocols.
e. Secure firewalling a. IPS
b. IPsec
c. L2TP
PART 4. CHAPTER 13. SECURITY SOLUTIONS d. L2F

1. What security device combines IOS Firewall with VPN nad IPS services? 7. What provides hardware VPN encryption for terminating a large number of VPN tunnels
a. ASA for ISRs?
b. ISR a. ASA SM
c. Cisco Catalyst switches b. WeBVPN Services Module
d. IPS c. Network Analysis Module 3
d. High-Performance AIM
2. Which of the following is a standards-based protocol for authenticating network
clients? 8. What are two ways to enhance VPN performance on Cisco ISR G2s?
a. Cisco ISE a. SSL Network Module
b. PoE b. IDS Network Module
c. 802.1X c. Built-In Hardware VPN Acceleration
d. CSM d. High-Performance AIM

3. The Cisco _____ is an integrated solution led by Cisco that incorporate the network 9. Which Cisco security solution can prevent noncompliant device from accessing the
infrastuture and third-party software to impose security policy on attached endpoints. network until they are compliant?
a. ASA a. IPSec
b. CSM b. ASA Service Module
c. ISR c. ACS
d. ISE d. Cisco ISE

4. What software-based solution can network security administrators use to configure 10. Which of the following services modules do Cisco Catalyst 6500 switches support?
standalone ASA firewalls? (Select the best answer) a. ASA SM
a. ISR b. Network Analysis Module 3
b. Cisco ISE c. High Performance AIM
c. ASDM d. FirePOWER IPS
d. IDM
11. What provides packets capture capabilities and visibility into all layers of network
5. Cisco IOS Trust and Identity has a set of services that includes which one of the data flows?
following? (Select all that apply). a. Network Analysis Module 3.
a. 802.1X b. ASA Services Module
b. SSL c. WebVPN Services Module
c. AAA d. IPsec PN SPA
d. ASDM
12. Which of the following are identity and access control protocols and mechanisms? i. CSM
(select that all apply). ii. IGP/EGP MD5
a. 802.1X iii Netflow
b. ACLs iv. Cisco ISE
c. CSM a. Identity and access control
d. NetFlow b. B. Threat detection and mitigation
c. C. Infrastructure protection
13. Which two of the following are Cisco security management tools? d. D. Security management
a. CSM
b. IDS module
c. ACS PART 4. CHAPTER 14. VOICE AND VIDEO DESING
d. Cisco ISE
1. True or false: LLQ is recommended for VoIP networks.
14. True or False: NetFlow is used for threat detection and mitigation.
2. True or false: H. 323 is an IETF standard, and SIP is an ITU standard for multimedia
15. True or False: Cisco ASAs, ASA SM, and IOS firewall are part of infection protocols.
containment.
3. True or false: An Erlang is a unit that represents the continuous use of one voice path
16. What IOS feature offers inline deep packet inspection to successfully diminish a wide in 1 hour.
range of network attacks?
a. IOS SSH 4. What do you implement to stop packets from being transmitted when there is silence
b. IOS SSL VPN in a voice conversation?
c. IOS IPsec. VAD (Voice Activity Detection)
d. IOS IPS
5. The variable delay of received VoIP packets is corrected with what kind of buffers?
17. The Cisco Fire POWER IPS Module for ASA can identify, analyze, and block unwanted Dejitters Buffers
traffic from flowing on the network.
6. True or false: Common Channel Signaling uses a separate channel for signaling.
18. What provides centralized control for administrative access to Cisco devices and
security applications? 7. True or false: FXO ports are used for phones, and FXS ports connect to the PSTN.
a. CSM
b. ACS 8. True or false: SS7 provides mechanisms for exchanging control and routing messages
c. NetFlow in the PSTN.
d. ASDM
9. An organization uses what kind of system to gather and provide information for the
19. Which of the following are PINs in the Cisco SAFE architecture? customer before transferring her to an agent?
a. Core IVR (Interactive Voice Response)
b. Data Center
c. Telecommuter 10. An organization uses what kind of system to route calls to agents based on the agent
d. Distribution skill group or call statistics?
ACD (Automatic Call Distribution)
20. Match each protocol, mechanism, or feature with its security grouping:
11. In addition to codec selection, both cRTP and VAD can be used to reduce the 20. Match each component with its Cisco IPT functional area:
bandwidth of VoIP calls. i. CUCM - b. Call processing
ii. Layer 3 switch - - d. Infrastructure
12. Label each of the following delays as fixed or variable: iii. Digital gateway - c. Client endpoint
a. Processing iv. Unity - a. Service applications
b. Dejitter buffer
c. Serialization 21. Which protocol is preferred for inter-PBX trunks?
d. Queuing a. SS7
e. Propagation b. RTP
c. Q.SIG
13. How can you reduce serialization delay? d. DTMF
More bandwidh or Segmentation
22. cRTP compresses the IP/ UDP/ RTP header to what size?
14. Which queuing technique uses a strict priority queue for RTP traffic? a. 2 or 4 bytes.
PQ-WFQ and LLQ. b. 2 or 5 bytes.
c. 40 bytes.
15. True or false: The maximum one-way delay in the G. 114 recommendation for d. It compresses the RTP header only.
acceptable voice is 200 ms.
23. The steps of converting an analog signal to digital format occur in which order?
16. True or false: FRF. 12 is an LFI standard used in networks with VoFR and VoIP over a. Sampling, filtering, digitizing
Frame Relay. b. Filtering, sampling, digitizing
c. Digitizing, filtering, sampling
17. An assessment of a network determines that the average round-trip time between two d. Sampling, digitizing, filtering
sites is 250 ms. Can an IPT solution be implemented between the sites?
Yes. 250 en ambos sentidos, es decir, en un sentido son 125 y el maximo permitido son 150ms 24. Digitizing is divided into which two processes?
a. Filtering and sampling
18. Match each protocol with its description: b. Expanding and filtering
i. DHCP - d. Provides IP address c. Companding, quantizing, and coding
ii. SCCP - c. Provides call signaling between Cisco IP phones and CUCM d. Sampling, quantizing, and coding
iii. RTP a. Transports coded voice streams
iv. H. 323 - b. Controls Cisco IOS gateways 25. Which of the following are goals of IP telephony?
v. TFTP - e. Provides phone configuration a. Use the existing IP infrastructure
b. Provide lower cost of ownership
19. Match each CM deployment model with its description: c. Provide greater flexibility in voice communications
i. Single-site deployment - b. Single CUCM cluster implemented in a large building d. All of the above
ii. Multisite WAN with distributed call processing - c. Multiple CUCM clusters
iii. Multisite WAN with centralized call processing - a. Single CUCM cluster with SRST at remote 26. An analysis of a 384Kbps WAN link shows complaints of voice quality issues between
sites two sites when large file transfers take place. The circuit is running at 45 percent
utilization. What QoS schemes should be implemented to alleviate this?
a. CQ and cRTP
b. LFI and cRTP
c. LLQ
d. All of the above 33. Which IPT component provides the call processing component?
a. Cisco Call Processing Manager
27. Which codec is recommended for use in WAN links? b. Cisco Gateway Manager
a. G. 711 c. Cisco Unified Communications Manager
b. G. 723 d. Cisco IP Contact Center
c. G. 726
d. G. 729 34. Which protocol is used for communications between two IP endpoints?
a. SCCP
28. Which technology reduces the amount of bandwidth used? (Select all that apply.) b. SIP
a. QoS c. H. 323
b. LFI d. MGCP
c. cRTP e. RSVP
d. VAD f. CAC
g. CUCM
29. Which of the following statements is true? h. RTP
a. CAC prevents voice calls from affecting other voice calls.
b. CAC prevents voice calls from affecting data bandwidth. 35. Which protocol is an IETF-defined application layer control protocol used to establish
c. CAC prevents data from affecting voice calls. and terminate calls between two or more endpoints?
d. CAC prevents data from affecting other data traffic. a. SCCP
b. SIP
30. What IPT component contains the dial plan and is used to register IP phones? c. H. 323
a. Gateway d. MGCP
b. Unity server e. RSVP
c. Gatekeeper f. CAC
d. Cisco Unified CallManager g. CUCM
h. RTP
31. Which are drivers for Unified Communications?
a. Better quality 36. Which protocol is defined in RFC 3661 and used by CUCM to control gateways?
b. Reduce WAN costs a. SCCP
c. Flexibility to carry data, voice, and video b. SIP
d. Efficient integration with legacy PSTN infrastructure c. H. 323
e. Improvement of QoS on the network d. MGCP
e. RSVP
32. Match the H. 323 component with its description. f. CAC
i. IP phone - d. Terminal g. CUCM
ii. Manages multipoint conferences - c. MCU h. RTP
iii. Call control and signaling - b. Gatekeeper
iv. Provides translation services between H. 323 endpoints - a. Gateway 37. Which services from the Media Services Framework provide capture of media
streams?
a. Access services
b. Transport services
c. Bridging services e. Real time
d. Storage services f. OAM
e. Session control services g. FTP
f. Application services h. YouTube
g. Endpoint services
h. Reliable services 42. Which CODEC generates an 8Kbps bit rate?
a. G. 711
38. Which services from the Media Services Framework provide transcoding? b. G. 726
a. Access services c. G. 728
b. Transport services d. G. 729
c. Bridging services e. G. 723
d. Storage services
e. Session control services 43. Which CODEC is used to provide toll quality calls?
f. Application services a. G. 711
g. Endpoint services b. G. 726
h. Reliable services c. G. 728
d. G. 729
39. Which traffic type is recommended for AF4 PHB? e. G. 723
a. Network control
b. Telephony 44. Which is the recommended QoS mechanism for VoIP networks?
c. Broadcast video a. WRED
d. Multimedia conferencing b. PQ
e. Real time c. WFQ
f. OAM d. LLQ
g. FTP e. DSCP
h. YouTube
45. How much bandwidth is generated by Cisco TelePresence 3000 at 1080p?
40. Which traffic type is recommended for CS2 PHB? a. 12.3 Mbps
a. Network control b. 4.1 Mbps
b. Telephony c. 6 Mbps
c. Broadcast video d. 768 kbps
d. Multimedia conferencing e. 2 Mbps
e. Real time
f. OAM 46. How much bandwith is generated by VT Advantage?
g. FTP a. 12.3 Mbps
h. YouTube b. 4.1 Mbps
c. 6 Mbps
41. Which traffic type is recommended for CS4 PHB? d. 768 Kbps
a. Network control e. 2 Mbps
b. Telephony
c. Broadcast video 47. What protocol transports voice streams for IP telephony?
d. Multimedia conferencing a. SCCP
b. SIP
c. H.323 53. What QS mechanisms should be used ensure voice quality?
d. MGCP a. Managing the buffers, compressing traffic
e. RSVP b. Classifying the voice traffic, congesting management and compression and fragmentation.
f. CAC c. Provisioning enough bandwidth for voice, classifying traffic, and interface queuing and
g. CUCM scheduling.
h. RTP d. Classifying enough traffic, buffering the voice traffic, and queuing the voice traffic.

48. Which IPT deployment model is recommended for a single building with no voice on 54. Which IPT functional area includes PoE, QoS, and VoIP traffic?
the WAN links but local PSTN is required? a. Server aplications
a. Single-site deployment b. Call processing
b. Multisite WAN with centralized call processing c. Client endpoint
c. Multisite WAN with distributed call processing d. Voice-enable infrastructure
d. CME
55. Which information will help you decide which IP Telephony deployment model to
49. Which IPT deploymeny model is recommended for companies with several large use?
locations? a. User will have to maje off-net calls
a. Single-site deployment b. LAN switches will required PoE+
b. Multisite WAN with centralized call processing c. Call will be made between remote sites over the WAN
c. Multisite WAN with distributed call processing d. G.729 codec will be used for internal calls
d. CME
56. Which CoS values are used for voice media and signaling?
50. Which IPT deployment is recommended for companies with a large and many remote a. CoS 1 and 5
sites? b. CoS 2 and 5
a. Single-site deployment c. CoS 3 and 5
b. Multisite WAN with centralized call processing d. CoS 4 and 5
c. Multisite WAN with distributed call processing
d. CME
PART 4. CHAPTER 15. NETWORK MANAGEMENT PROTOCOLS
51. You perform some one-way delay tests between locations. What is the acceptable
one-way delay for voice traffic? 1. What does the acronym FACPS stand for?
a. 50 ms
b. 150 ms 2. CDP runs at what layer of the OSI model?
c. 400 ms Data Link Layer
d. 1 second
3. Syslog level 5 is what level of severity?
52. What is the size of the codeword created with each sample of voice? Notice Level
a. 8 bits
b. 64 bits 4. True or False: RMON provides more scalability than NetFlow.
c. 8 Bytes
d. 8k Hz 5. True or False: Netflow provides detailed information on the number of bytes and
packets per conversation.
b. MIB
6. What information can be obtained from neighbor using CDP? c. CDP
d. Netflow
7. What SNMP message is sent by an agent when an event occurs?
a. Get 14. Which of the following are trou about CDP (Select Three.)
b. Set a. It uses UDP
c. GetResponse b. It is a data-link protocol
d. Trap c. It provides information on neighboring routers and switches
d. It uses syslog and RMON
8. What SNMP message is sent to an agent to obtain an instance of an object?
a. Get 15. RMONv2 provides information at what levels of the OSI model?
b. Set a. Data link and physical
c. GetResponse b. Network, data link, and physical
d. Trap c. Transport and network only
d. Network to application
9. What SNMP message is used to configure a managed device?
a. Get 16. Which network management technology operates over TCP.
b. Set a. SNMP
c. GetResponse b. RMON
d. Trap c. NetFlow
d. None of the above
10. About how many facilities are available for syslog in Cisco routers?
a. 25 17. Which statement is correct?
b.100 a. SNMPv1 uses GetBulk operations and 32-bit values.
c. 500 b. SNMv2 uses 32-bit values, and SNMPv3 uses 64-bit values
d. 1000 c. SNMPv1 uses GetBulk operations and SNMPv2 uses 64-bit values.
d. SNMPv1 uses GetBulk operations and SNMPv2 uses Inform operations.
11. Which SNMPv3 level provides authentication with no encryption?
a. authPriv 18. Which SNMPv3 level provides authentication and privacy?
b. authNoPriv a. authPriv
c. noAuthNoPriv b. authNoPri
d. noauthPriv c. noAuthNoPri
d. noauthPri
12. What encryption standard does SNMPv3 use?
a. 3DES 19. Match the RMON group with its description.
b. CBC-DES i. Statistics - c. Contains real-time statistics for interface: packets sent, bytes, CRC errors,
c. HMAC-MD5 fragments.
d. MD5 ii. Matrix - a. Stores statistics for conversations between two host
iii. alHost - d. Contains application layer statistics for traffic sent to or from each host.
13. Which technologies can you use to assess a network and create documentation? iv. protocoldir b. List the protocols that the device supports.
(Select two.)
1. RMON
20. What is the most critical syslog priority level? 26. Which is not an SNMP operation?
a. 0 a. GetNext
b. a b. Trap
c. 6 c. Inform Request
d. 7 d. Community
e. GetBulk
21. Which management protocol will help a company concentrate on Layer 4 monitoring and
gain information to assist in log-term trending analysis? 27. Which protocols allows for vendor-specific information?
a. SNMPv3 a. SNMPv3
b. RMON2 b. RMON2
c. NetFlow c. ASN.1
c. CDP c. CDP
e. MIB e. MIB

22. Which management protocols performs network traffics analysis? 28. Which protocol allows for ISPs to bill its customers for network usage?
a. SNMPv3 a. SNMPv3
b. RMON2 b. RMON2
c. NetFlow c. NetFlow
c. CDP c. CDP
e. MIB e. MIB

23. What virtual information store is sed by SNMP? 29. Which solution can be customized in each interface to include data timestamping
a. SNMPv3 across a large number of interfaces?
b. RMON2 a. SNMPv3
c. ASN.1 b. RMON2
c. CDP c. NetFlow
e. MIB c. CDP
e. MIB
24. What standard language is used by SNMP?
a. SNMPv3 30. Cisco Netflow consists of wich components? (Select three.)
b. RMON2 a. NetFlow accounting
c. ASN.1 b. FlowCollector
c. CDP c. NwtFlow Billing Server
e. MIB d. Network Data Analyzer
e. NetFlow Traffic Generator Tool
25. Which SNMPv3 method provides authentication but no encryption?
a. noAuthNoPriv 31. You are performing a manual Network discovery using CDP when you encounter non-
b. authPriv Cisco network devices. What options do you have to continue the manual discovery?
c. authNoPriv a. Continue to use CDP; it discovers non-Cisco devices.
d. noauthPriv b. Use CDP non-Cisco command options.
c. Use LLDP.
Give up; Only CDP can be used.

You might also like