Syp 061136
Syp 061136
Syp 061136
SAKAE 1-turn Potentiometers are fully continuous CP or FCP-A is respectively contained in an aluminum
rotation potentiometers without stopper and are highly housing case processed by electrolytic corrosion-proof
reliable in offering an excellent quality as well as a plating in silver color (CP) and black color (FCP-A) with
prolonged rotating life. There are 2 kinds of resistive performances and dimensions according to U.S. MIL, and
element available in this series: Wirewound (CP) and V.R.C.I. Standards. They are light in weight and small in
Conductive Plastic (FCP-A) elements. You can easily size as well as of rigid construction. Selection of any
make a best selection between these versions to your desired item is possible among a variety of standard
versatile application programs ranging from hand-operating models, of which diameters are variable between 12mm
use to servo applications. and 50mm.
SELECTION GUIDE
Kind of Diameter Model No. Features
Element (mm)
22 CP22C, CP22E Bushingmount type low-cost pot. with outer diameter of 22mm.
Wirewound
22 50 CP22, CP30, CP45, CP50 Servomount type precision pots with outer diameter of 22mm to 50mm
and excellent in temperature coefficient.
FCP12AC, FCP22AC, FCP22E Bushingmount type low-cost pots with outer diameter of 12mm and
22mm.
12, 22
Conductive FCPS22AC Servomount type low-cost pot. with outer diameter of 22mm.
Plastic
Servomount type precision pots with outer diameter of 12mm to 50mm
12 50 FCP12A, FCP22A, FCP30A, and with a patented multi-finger contact to make a good contact stability
FCP40A, FCP50A and excellent high speed tracking ability.
61
General Performances
Standard Special Special Independent Special Specifications
Kind of Total Lower Higher Iinearity Front and Simple
Element Model No. Resistance Resistance Resistance Tolerance With Extra With Multi-
Stopper Rear Shaft Taps Sealing switch ganged
Range () Values () Values () (%) Extension Type
CP22C 50 10k 10, 20 20k 0.5 0.25
CP22E 50 10k 10, 20 20k 0.5 0.25
Wirewound
CP22 50 10k 10, 20 20k 0.5 0.2
CP30 50 20k 10, 20 50k 0.5 0.15
CP45 50 20k 10, 20 50k 0.5 0.1
CP50 50 20k 10, 20 50k 0.5 0.1
FCP12AC 1k 10k 500 20k, 50k, 100k 2.0 1.0
FCP12A 1k 10k 500 20k, 50k, 100k 2.0 1.0
FCP22AC 1k 10k 500 20k, 50k, 100k 1.5 1.0
FCP22E 1k 10k 500 20k, 50k, 100k 1.5 1.0
Conductive FCPS22AC 1k 10k 500 20k, 50k, 100k 1.0 0.5
Plastic
FCP22A 1k 10k 500 20k, 50k, 100k 1.0 0.3
FCP30A 1k 10k 500 20k, 50k, 100k 1.0 0.2
FCP40A 1k 10k 500 20k, 50k, 100k, 200k 0.5 0.2
FCP50A 1k 10k 500
20k, 50k, 100k,
200k, 500k 0.5 0.05
Note: 1. For detailed performances, please refer to specifications of each model in this catalog.
Environmental Performances
Model Nos. CP22C, CP22E, CP22, CP30, CP45, FCP12AC, FCP12A, FCP22E,
FCP22A, FCP30A, FCP40A, FCP50A
Parameters CP50 (LNB22 ... Page 76) FCP22AC, FCPS22AC
Operating
-55 +105 -55 +105 -55 +125
Temperature Range
5 cycles under -55 +105 5 cycles under -55 +105 5 cycles under -55 +125
Temperature Total resistance value variation: Total resistance value variation: Total resistance value variation:
Cycle below 5% below 10% below 10%
No mechanical damage No mechanical damage No mechanical damage
24 hours at -55
24 hours at -55 24 hours at -55
Total resistance value variation:
Exposure at Low Total resistance value variation: Total resistance value variation:
below 5%
Temperature below 5% below 5%
Output voltage variation: below 0.5%
No mechanical damage No mechanical damage
No mechanical damage
1,000 hours at 125
1,000 hours at 105 1,000 hours at 105
Total resistance value variation:
Exposure at High Total resistance value variation: Total resistance value variation:
below 10%
Temperature below 5% below 10%
Output voltage variation: below 0.5%
No mechanical damage No mechanical damage
No mechanical damage
10Hz to 2,000Hz 147m/s2 12 hours 10Hz to 2,000Hz 147m/s2 12 hours 10Hz to 2,000Hz 147m/s2
Total resistance value variation: Total resistance value variation: Total resistance value variation:
Vibration
below 5% below 2% below 2%
No mechanical and electrical damage No mechanical and electrical damage No mechanical and electrical damage
490m/s2 11ms 18 times 490m/s2 11ms 18 times 490m/s2 11ms 18 times
Total resistance value variation: Total resistance value variation: Total resistance value variation:
Shock
below 1% below 1% below 1%
No mechanical and electrical damage No mechanical and electrical damage No mechanical and electrical damage
40 95%RH 240 hours 40 95%RH 120 hours 40 95%RH 120 hours
Moisture Total resistance value variation: Total resistance value variation: Total resistance value variation:
Resistance below 10% below 10% below 10%
Insulation resistance: over 10M Insulation resistance: over 10M Insulation resistance: over 10M
No load at 40 r.p.m. No load at 400 r.p.m., inverting every 15 minutes No load at 400 r.p.m., inverting every 15
1,000,000 shaft revolutions FCP12AC......5,000,000 shaft revolutions minutes
500,000 shaft revolutions for CP22C & FCP12A 50,000,000 shaft revolutions
10,000,000 shaft
CP22E FCP22E Total resistance value variation:
revolutions
Total resistance value variation: FCP22AC below 10% against initial value
Rotational Life
below 5% against initial value FCPS22AC ...20,000,000 shaft revolutions Independent linearity tolerance:
Expectancy
Independent Iinearity tolerance: Total resistance value variation: below 150% of specified value
(at 25 )
below 150% of specified value below 10% against initial value Output smoothness:
Noise: below 500 E.N.R. Independent Iinearity tolerance: below 150% of specified value
below 150% of specified value
Output smoothness: below 150% of
specified value
Note: 2. In case of the potentiometer with special resistance values and special specifications, the above performances may change and therefore, please consult us in advance, separately.
3. As for operating temperature range, we can not guarantee that all values of performances can satisfy within this operating temperature range. (Please see page 24 in this catalog for further
details.)
4. The above values of performances based on each testings were measured after each testings completed, respectively, under standard conditions. As for the values during testings and other
values not mentioning in the above table, please ask us separately.
5. In case of model LNB22, all values mentioned in the above table are reference only.
62
LOW-COST ITEM
Standard Dimensions
61 1.6
10.32-0.05
0
6 -0.02
0
2
3
1
M9 P 0.75
Note: 1. 1 pc. each inner teeth washer and hex nut are attached.
Model CP22C
2. Please process the mounting hole on the panel to be mounted
(Metal Housing)
with this potentiometer by the diameter of 10.32mm +00.05 .
General Specifications
Standard Resistance Noise: Below 100 E.N.R.
Range: 50 to 10k Electrical Travel: 355 5
Max. Practical Mechanical Travel: 360 (Endless)
Resistance Value: 20k Insulation Resistance: Over 1,000M at 1,000V.D.C.
Total Resistance Dielectric Strength: 1 minute at 1,000V.A.C.
Tolerance: Standard Class 3% (H) Starting Torque: Below 5mNm (50gfcm)
Precision Class 1% (F) Max. Working Voltage: 250V
Independent Linearity Resist. Temperature
Tolerance: Standard Class 0.5% Coefficient of Wire: 20p.p.m./
Precision Class 0.25% Mass: Approx. 30g
(0.35% in case of below 1k)
Power Rating: 0.5W
63
U.S.A. PAT. No.4400687 F.R.G. PAT. No.3136765 HONGKONG PAT. No.751 of 1984
LOW-COST ITEM U.K. PAT. No.2087160 FRANCE PAT. No.8118538 SINGAPORE PAT. No.372/84
Standard Dimensions
10.32 -0.05
7.60.2
0
6 -0.05
0
M9 P 0.75
R16.5MAX
3 2 1 1.60.4
App 20
r ox . ro x .
20 App
Note: 1. 1 pc. each inner teeth washer and hex nut are attached.
Model CP22E 2. Please process the mounting hole on the panel to be mounted
(Plastic Housing) with this potentiometer by the diameter of 10.32mm +00.05 .
General Specifications
Standard Resistance Noise: Below 100 E.N.R.
Range: 50 to 10k Electrical Travel: 355 5
Max. Practical Mechanical Travel: 360 (Endless)
Resistance Value: 20k Insulation Resistance: Over 1,000M at 1,000V.D.C.
Total Resistance Dielectric Strength: 1 minute at 1,000V.A.C.
Tolerance: Standard Class 3% (H) Starting Torque: Below 5mNm (50gfcm)
Precision Class 1% (F) Max. Working Voltage: 250V
Independent Linearity Resist. Temperature
Tolerance: Standard Class 0.5% Coefficient of Wire: 20p.p.m./
Precision Class 0.25% Mass: Approx. 20g
(0.35% in case of below 1k)
Power Rating: 0.5W
64
Wirewound MODEL CP22 (Servomount)
Standard Dimensions
2 M2
3 -0.02
4 depth
22.23 +0.13
-0.25
19.05 -0.03
22.23 1
19.1 -0.2
0
0
1 3
2
R18MAX
1.5 1.570.2
1.570.2
Model CP22
General Specifications
Standard Resistance Noise: Below 100 E.N.R.
Range: 50 to 10k Electrical Travel: 355 5
Max. Practical Mechanical Travel: 360 (Endless)
Resistance Value: 20k Insulation Resistance: Over 1,000M at 1,000V.D.C.
Total Resistance Dielectric Strength: 1 minute at 1,000V.A.C.
Tolerance: Standard Class 3% (H) Starting Torque: Below 1.5mNm (15gfcm)
Precision Class 1% (F) Max. Working Voltage: 250V
Independent Linearity Resist. Temperature
Tolerance: Standard Class 0.5% Coefficient of Wire: 20p.p.m./
Precision Class 0.2% Mass: Approx. 15g
(0.3% in case of below 1k)
Power Rating: 0.5W
65
Wirewound MODEL CP30 (Servomount)
Standard Dimensions
2 M3
4 depth
3 -0.02
0
26.97 +0.13
-0.25
24.61-0.03
27 1
-0.2
0
0
24
1 3
2
R20 MAX
1.5 1.570.2
General Specifications
Standard Resistance Noise: Below 100 E.N.R.
Range: 50 to 20k Electrical Travel: 355 5
Max. Practical Mechanical Travel: 360 (Endless)
Resistance Value: 50k Insulation Resistance: Over 1,000M at 1,000V.D.C.
Total Resistance Dielectric Strength: 1 minute at 1,000V.A.C.
Tolerance: Standard Class 3% (H) Starting Torque: Below 2mNm (20gfcm)
Precision Class 1% (F) Max. Working Voltage: 250V
Independent Linearity Resist. Temperature
Tolerance: Standard Class 0.5% Coefficient of Wire: 20p.p.m./
Precision Class 0.15% Mass: Approx. 30g
(0.2% in case of below 5k)
Power Rating: 0.75W
66
Wirewound MODEL CP45 (Servomount)
Standard Dimensions
181 31.51 3 M3
4 depth
6 -0.02
33.32-0.03
0
41.28 +0.13
-0.25
36 -0.2
4
0
0.
41 1
25
R30 MAX
2 1.570.2
2.360.2
Model CP45
General Specifications
Standard Resistance Noise: Below 100 E.N.R.
Range: 50 to 20k Electrical Travel: 355 3
Max. Practical Mechanical Travel: 360 (Endless)
Resistance Value: 50k Insulation Resistance: Over 1,000M at 1,000V.D.C.
Total Resistance Dielectric Strength: 1 minute at 1,000V.A.C.
Tolerance: Standard Class 3% (H) Starting Torque: Below 4mNm (40gfcm)
Precision Class 1% (F) Max. Working Voltage: 250V
Independent Linearity Resist. Temperature
Tolerance: Standard Class 0.5% Coefficient of Wire: 20p.p.m./
Precision Class 0.1% Mass: Approx. 90g
(0.2% in case of below 2k)
Power Rating: 1.0W
67
Wirewound MODEL CP50 (Servomount)
Standard Dimensions
181 31.51 3 M3
4 depth
6 -0.02
0
50.80+0.13
47.63 -0.03
-0.25
4
0.
50 1
47-0.2
0
30
0
R34.5 MAX
2 1.570.2
2.360.2
Model CP50
General Specifications
Standard Resistance Noise: Below 100 E.N.R.
Range: 50 to 20k Electrical Travel: 355 3
Max. Practical Mechanical Travel: 360 (Endless)
Resistance Value: 50k Insulation Resistance: Over 1,000M at 1,000V.D.C.
Total Resistance Dielectric Strength: 1 minute at 1,000V.A.C.
Tolerance: Standard Class 3% (H) Starting Torque: Below 5mNm (50gfcm)
Precision Class 1% (F) Max. Working Voltage: 250V
Independent Linearity Resist. Temperature
Tolerance: Standard Class 0.5% Coefficient of Wire: 20p.p.m./
Precision Class 0.1% Mass: Approx. 120g
(0.2% in case of below 2k)
Power Rating: 1.5W
68
LOW-COST ITEM
Standard Dimensions
7.14 -0.05
70.5
0
3 -0.02
0
1 3
130.3
5
4 2
0.7
M6 P 0.75
1.50.2
Extra tapping position
Note: 1. 1 pc. each inner teeth washer and hex nut are attached.
Model FCP12AC 2. Please process the mounting hole on the panel to be mounted
with this potentiometer by the diameter of 7.14mm +00.05 .
General Specifications
Standard Resistance Contact Resistance
Values: 1k, 2k, 5k, 10k () Variation: Below 3% C.R.V.
Special Practical Power Rating: 0.2W
Resistance Values: 500, 20k, 50k, 100k () Electrical Travel: 300 5
Total Resistance Mechanical Travel: 360 (Endless)
Tolerance: Standard Class 15% (L) Insulation Resistance: Over 1,000M at 500V.D.C.
Precision Class 10% (K) Dielectric Strength: 1 minute at 500V.A.C.
Independent Linearity Starting Torque: Below 2mNm (20gfcm)
Tolerance: Standard Class 2.0% Resistance
Precision Class 1.0% Temperature
Resolution: Essentially infinite Coefficient: 400p.p.m./
Output Smoothness: Below 0.1% against input voltage Mass: Approx. 8g
Standard Dimensions
11.11-0.05
5
9.5MAX
3 -0.02
0
1 3
12.7 +0.13
-0.25
130.5
5
4 2
0.7
69
General Specifications
Standard Resistance Contact Resistance
Values: 1k, 2k, 5k, 10k () Variation: Below 3% C.R.V.
Special Practical Power Rating: 0.2W
Resistance Values: 500, 20k, 50k, 100k () Electrical Travel: 300 5
Total Resistance Mechanical Travel: 360 (Endless)
Tolerance: Standard Class 15% (L) Insulation Resistance: Over 1,000M at 500V.D.C.
Precision Class 10% (K) Dielectric Strength: 1 minute at 500V.A.C.
Independent Linearity Starting Torque: Below 1mNm (10gfcm)
Tolerance: Standard Class 2.0% Resistance
Precision Class 1.0% Temperature
Resolution: Essentially infinite Coefficient: 400p.p.m./
Output Smoothness: Below 0.1% against input voltage Mass: Approx. 5g
LOW-COST ITEM
Standard Dimensions
221 121 221
81
10.32 -0.05
0
6 -0.02
0
1 3
M9 P 0.75
2.5 1.6
Note: 1. 1 pc. each inner teeth washer and hex nut are attached.
Model FCP22AC 2. Please process the mounting hole on the panel to be mounted
(Metal Housing) with this potentiometer by the diameter of 10.32mm +00.05 .
General Specifications
Standard Resistance Contact Resistance
Values: 1k, 2k, 5k, 10k () Variation: Below 2% C.R.V.
Special Practical Power Rating: 1.0W
Resistance Values: 500, 20k, 50k, 100k () Electrical Travel: 320 5
Total Resistance Mechanical Travel: 360 (Endless)
Tolerance: Standard Class 15% (L) Insulation Resistance: Over 1,000M at 500V.D.C.
Precision Class 10% (K) Dielectric Strength: 1 minute at 500V.A.C.
Independent Linearity Starting Torque: Below 5mNm (50gfcm)
Tolerance: Standard Class 1.5% Resistance
Precision Class 1.0% Temperature
Resolution: Essentially infinite Coefficient: 400p.p.m./
Output Smoothness: Below 0.1% against input voltage Mass: Approx. 30g
70
U.S.A. PAT. No.4400687 F.R.G. PAT. No.3136765 HONGKONG PAT. No.751 of 1984
LOW-COST ITEM U.K. PAT. No.2087160 FRANCE PAT. No.8118538 SINGAPORE PAT. No.372/84
Standard Dimensions
10.32 -0.05
0
7.60.2
6 -0.05
0
M9 P 0.75
R16.5MAX
3 2 1 1.60.4
App 20
r ox . ro x .
20 App
Note: 1. 1 pc. each inner teeth washer and hex nut are attached.
Model FCP22E
2. Please process the mounting hole on the panel to be mounted
(Plastic Housing)
with this potentiometer by the diameter of 10.32mm +00.05 .
General Specifications
Standard Resistance Contact Resistance
Values: 1k, 2k, 5k, 10k () Variation: Below 2% C.R.V.
Special Practical Power Rating: 1.0W
Resistance Values: 500, 20k, 50k, 100k () Electrical Travel: 320 5
Total Resistance Mechanical Travel: 360 (Endless)
Tolerance: Standard Class 15% (L) Insulation Resistance: Over 1,000M at 500V.D.C.
Precision Class 10% (K) Dielectric Strength: 1 minute at 500V.A.C.
Independent Linearity Starting Torque: Below 5mNm (50gfcm)
Tolerance: Standard Class 1.5% Resistance
Precision Class 1.0% Temperature
Resolution: Essentially infinite Coefficient: 400p.p.m./
Output Smoothness: Below 0.1% against input voltage Mass: Approx. 20g
71
LOW-COST ITEM
Standard Dimensions
8.2MAX
6 -0.02
0
19.05 -0.05
22 +0.13
-0.25
18 -0.2
3
0
2
0
1
0.8MAX
1.57 1.570.2 2 M2
5 depth
1.570.2
Model FCPS22AC
General Specifications
Standard Resistance Contact Resistance
Values: 1k, 2k, 5k, 10k () Variation: Below 2% C.R.V.
Special Practical Power Rating: 1.0W
Resistance Values: 500, 20k, 50k, 100k () Electrical Travel: 320 5
Total Resistance Mechanical Travel: 360 (Endless)
Tolerance: Standard Class 15% (L) Insulation Resistance: Over 1,000M at 500V.D.C.
Precision Class 10% (K) Dielectric Strength: 1 minute at 500V.A.C.
Independent Linearity Starting Torque: Below 5mNm (50gfcm)
Tolerance: Standard Class 1.0% Resistance
Precision Class 0.5% Temperature
Resolution: Essentially infinite Coefficient: 400p.p.m./
Output Smoothness: Below 0.1% against input voltage Mass: Approx. 30g
Standard Dimensions
2 M2
3 -0.02
4 depth
0
22.23 +0.13
-0.25
19.05 -0.03
22.231
-0.2
0
0
19.1
1 3
2
R18MAX
1.570.2
72
General Specifications
Standard Resistance Contact Resistance
Values: 1k, 2k, 5k, 10k () Variation: Below 2% C.R.V.
Special Practical Power Rating: 1.0W
Resistance Values: 500, 20k, 50k, 100k () Electrical Travel: 320 5
Total Resistance Mechanical Travel: 360 (Endless)
Tolerance: Standard Class 10% (K) Insulation Resistance: Over 1,000M at 1,000V.D.C.
Independent Linearity Dielectric Strength: 1 minute at 1,000V.A.C.
Tolerance: Standard Class 1.0% Starting Torque: Below 1.5mNm (15gfcm)
Precision Class 0.5% Resistance
Super Precision Class 0.25% Temperature
Resolution: Essentially infinite Coefficient: 400p.p.m./
Output Smoothness: Below 0.1% against input voltage Mass: Approx. 20g
Standard Dimensions
151 11.51 150.2
2 M3
4 depth
3 -0.02
0
26.97 +0.13
-0.25
24.61-0.03
27 1
-0.2
0
0
24
1 3
2
R20 MAX
1.5 1.570.2
Model FCP30A
1.570.2
General Specifications
Standard Resistance Contact Resistance
Values: 1k, 2k, 5k, 10k () Variation: Below 2% C.R.V.
Special Practical Power Rating: 1.5W
Resistance Values: 500, 20k, 50k, 100k () Electrical Travel: 340 5
Total Resistance Mechanical Travel: 360 (Endless)
Tolerance: Standard Class 10% (K) Insulation Resistance: Over 1,000M at 1,000V.D.C.
Independent Linearity Dielectric Strength: 1 minute at 1,000V.A.C.
Tolerance: Standard Class 1.0% Starting Torque: Below 2mNm (20gfcm)
Precision Class 0.5% Resistance
Super Precision Class 0.2% Temperature
Resolution: Essentially infinite Coefficient: 400p.p.m./
Output Smoothness: Below 0.1% against input voltage Mass: Approx. 25g
73
Conductive Plastic MODEL FCP40A (Servomount)
Standard Dimensions
181 16.51
6 -0.02
0
36.50 +0.13
-0.25
33.32 -0.03
32.8 -0.2
36.51
0
1 3
2
2 1.570.2 R27MAX
General Specifications
Standard Resistance Contact Resistance
Values: 1k, 2k, 5k, 10k () Variation: Below 2% C.R.V.
Special Practical Power Rating: 2.0W
Resistance Values: 500, 20k, 50k, 100k, 200k () Electrical Travel: 340 5
Total Resistance Mechanical Travel: 360 (Endless)
Tolerance: Standard Class 10% (K) Insulation Resistance: Over 1,000M at 1,000V.D.C.
Independent Linearity Dielectric Strength: 1 minute at 1,000V.A.C.
Tolerance: Standard Class 0.5% Starting Torque: Below 3mNm (30gfcm)
Precision Class 0.25% Resistance
Super Precision Class 0.1% Temperature
Resolution: Essentially infinite Coefficient: 400p.p.m./
Output Smoothness: Below 0.1% against input voltage Mass: Approx. 60g
Standard Dimensions
181 16.51
6 -0.02
0
50.80 +0.13
47.63 -0.03
-0.25
47 -0.2
50.81
0
0
1 3
2
2 1.570.2 R34.5MAX
2.360.2
Model FCP50A
74
General Specifications
Standard Resistance Contact Resistance
Values: 1k, 2k, 5k, 10k () Variation: Below 2% C.R.V.
Special Practical Power Rating: 3.0W
Resistance Values: 500, 20k, 50k, 100k, 200k, 500k () Electrical Travel: 350 5
Total Resistance Mechanical Travel: 360 (Endless)
Tolerance: Standard Class 10% (K) Insulation Resistance: Over 1,000M at 1,000V.D.C.
Independent Linearity Dielectric Strength: 1 minute at 1,000V.A.C.
Tolerance: Standard Class 0.5% Starting Torque: Below 4mNm (40gfcm)
Precision Class 0.2%Super Resistance
Precision Class 0.05% Temperature
Resolution: Essentially infinite Coefficient: 400p.p.m./
Output Smoothness: Below 0.1% against input voltage Mass: Approx. 80g
Specifications Dimensions
Total Resistance Value : 10K15%
Independent Linearity Tolerance : 3%
Terminal 1
Electrical Travel : 305 Terminal 2
19 15
41
28
21
Direction
75
LOW-TORQUE POTENTIOMETER
(Precision 1-turn, Low-torque, Wirewound Element)
SAKAE Low-torque Potentiometers with a wirewound inclination, vibration, etc. is easily possible by installing
resistive element are very small in size and light in weight, these potentiometers on float, bellows, etc. These models
It offers a very low starting torque of below 0.1mN m are only available with wirewound resistive element as
(1gf cm) in Model LNB22. Electrical detection of standard version.
Standard Dimensions
201 11.51 150.2
15MAX
+0.13
19.05 -0.03
-0.25
-0.2
221
0
2 -0.02
22.23
19.8
0
R19MAX 2 M2
4 depth
1 3
2
1.5 1.570.2
1.570.2
Model LNB22 221
General Specifications
Standard Resistance 2k
Range: 100 to 20k Below 0.1mNm (1.0gfcm)
Total Resistance (within electrical travel)
Tolerance: Standard Class 3% (H) Max. Working
Precision Class 1% (F) Voltage: 80V
Independent Linearity Resist. Temperature
Tolerance: Standard Class 0.5% Coefficient of Wire: 20p.p.m./
Precision Class 0.25% Operating
Power Rating: 0.3W Temperature Range: -30 +85
Noise: Below 100 E.N.R. Life Expectancy,
Electrical Travel: 355 5 Shaft Revolutions: 100,000
Mechanical Travel: 360 (Endless) Mass: Approx. 20g
Insulation Resistance: Over 100M at 1,000V.D.C.
Dielectric Strength: 1 minute at 1,000V.A.C.
Starting Torque: <2k Environmental Performances:
Below 0.15mNm (1.5gfcm) Please see the table on page 62.
(within electrical travel)
76
Standard Resistance Values No. of Wire Turns Resistance Wire Used
Resist. Value () 100 200 500 1k 2k 5k 10k 20k
No. of Wire Turns 370 470 450 570 740 1,000 1,270 1,670
Resist. Wire Used Cu-Ni System Ni-Cr System
(1-turn Pot. with special housing case and completely (1-turn Pot. with low-torque and special housing
sealed -IP65-.) case.)
The following items discontinue to manufacture as our standard items and however, we can manufacture them as
specially ordered items.
77
SPECIALLY ORDERED ITEMS
136