This document provides product specifications for a smart lighting control system that features:
- Remote communication capabilities including GPRS, CDMA, and Ethernet
- Zigbee for local communication between lights and gateways
- Support for lighting control schedules, sensor integration, and remote switching of up to 4 circuits
- Integrated energy metering and ability to interface with external smart meters
This document provides product specifications for a smart lighting control system that features:
- Remote communication capabilities including GPRS, CDMA, and Ethernet
- Zigbee for local communication between lights and gateways
- Support for lighting control schedules, sensor integration, and remote switching of up to 4 circuits
- Integrated energy metering and ability to interface with external smart meters
This document provides product specifications for a smart lighting control system that features:
- Remote communication capabilities including GPRS, CDMA, and Ethernet
- Zigbee for local communication between lights and gateways
- Support for lighting control schedules, sensor integration, and remote switching of up to 4 circuits
- Integrated energy metering and ability to interface with external smart meters
This document provides product specifications for a smart lighting control system that features:
- Remote communication capabilities including GPRS, CDMA, and Ethernet
- Zigbee for local communication between lights and gateways
- Support for lighting control schedules, sensor integration, and remote switching of up to 4 circuits
- Integrated energy metering and ability to interface with external smart meters
FEATURES Support GPRS/CDMA/Ethernet remote communication
Zigbee local communication
High-precision real-time-clock
Support instant lighting control
Support up to 32 programmed lighting control schedules
Support up to 4 channels main circuit switch control
Integrated internal 3-phase multi-functional energy meter
Support external 3-phase smart energy meter read through RS485com-
munication
Support different sensors (illuminance sensor, visibility sensor, and etc.)
Support remote sensing of mechanical contact points
1.0. DESCRIPTION The SLC-GW-400 zigbee lighting control gateway, working together in coordination with SLC-CT-001 signal receiver and system software, is a cost-efficient smart lighting solution for large scale intelligent street lighting and smart industrial lighting applications. The gateway enables a wide range of functions in the smart lighting control system. Receives the control command from the remote server and dispatches the command to the target light. Collects the status information from every light, and report to the remote server. Provides the main switch control service for up-to 4 circuits. Multiple lighting control schedules for different conditions can also be remotely programmed . Can provide the daily lighting control service with the absence of remote server. An internal 3-phase energy metering block is integrated in the gateway device for 3-phase electrical pa- rameter measuring. The external smart energy meter can be read by the gateway via RS485 communication protocol. The remote sensing function provided by the gateway can be used for monitoring status of power distri- bution cabinet, or any exception occurs during the main-switch control. PRODUCT SPECIFICATION ver. 01-2016
This feature shows system database in which the server can record the information of each lamp which includes product specifications, light pole number and the location information, etc. Each lamp can be on visual display on the map; when an individual lamp is selected user is able to view the specific de- tails of the lamp. 6.2. Remote control of entire circuit : This features enables remote real-time access to timing control, path in power distribution cabinet and on/off function switch of each circuit. 6.3. Remote control individual lamp : This enables remote real-time control of individual lamp switch (driver), we are also able to control the brightness of the lamp using the dim function. Timing and scheduling of lamps can be set both individually or by groups. 6.4. Condition monitoring: With this feature we are able to monitor the lamp status, which includes the current brightness level, working voltage/current/power and other operation parameters such as temperature. 6.5. Automatic fault detection and alarm system: This features provides immediate report of lamp malfunction. Any failures of malfunction are immedi- ately reported via the system . 6.6. Real-time power monitoring: The system software can concentrate on roads with controller built-in electric meter or external smart meters for remote automatic meter reading. The system is able to measure three-phase electric each phase voltage, current, the instantaneous active power/reactive power, apparent power, power factor, phase angle, active power and reactive power, etc., The System software can monitor the real-time data and can also draw on historical data for analysis. PRODUCT SPECIFICATION ver. 01-2016
SMART LIGHTING CONTROL SYSTEM
7.0. Street Lighting Application
7.1. System Features Include:
Control up to 400 units from single gateway
Integrated geographic information system of street lamp system management
Remote configuration of scheduling and status report monitoring
Statements automatically generated covering energy consumption and analysis.
Street lights maintenance management.
PRODUCT SPECIFICATION ver. 01-2016
SMART LIGHTING CONTROL SYSTEM
8.0. Factory-Project Lighting Applications
8.1. System Features Include:
Centralized lighting system control
Direct Connection to gateway via LAN
Control multiple types of luminaires individually or by group
Customized lighting network
Lighting scheduler , can control and schedule on/off and light dimming of individual lamps or groups
Centralized controller has a built-in measuring unit : can measure three-phase electric each phase voltage, current, the instantaneous active power, instantaneous reactive power and instantaneous apparent power, power factor, phase An- gle, active power and reactive power, etc.
Automatic Meter reading : Data can be set to calculate costs of local or national grid. PRODUCT SPECIFICATION ver. 01-2016
SMART LIGHTING CONTROL SYSTEM
9.0. Software Features: Location and Lighting Plan overview
Description Customized lighting layout or Map can be integrated to provide clear overview of luminaire control.
Features View individual luminaire location Point and Click control Real time Operational Report ( reports malfunctioning or overheated luminaires etc.) PRODUCT SPECIFICATION ver. 01-2016
SMART LIGHTING CONTROL SYSTEM
9.1. Software Features: Lighting Plan Scheduler
Description Light dimming plan configuration interface, friendly user interface and powerful graphics editing/form, make any plans that move light Settings can be completed within 1 minute.
Features Detailed Luminaire control and scheduling Daily, Monthly, Yearly Scheduler PRODUCT SPECIFICATION ver. 01-2016
SMART LIGHTING CONTROL SYSTEM
9.2. Software Features: Power consumption Reports
Power consumption report interface can collect the electricity consumption in a given period and area, and also can automatically generate the analysis reports line chart, histogram, pie chart
