Scribd
Upload
1K views13 pages

Thinker Manual

1. The document provides installation and setup instructions for a smart home router called the "thinker". 2. It explains how to connect the thinker to a wireless network, add and configure it using a mobile app, and set up network settings through a web browser. 3. The document outlines how to control smart home appliances either through remote codes or direct matching, set up intelligent scenes, and access more advanced functions.

Uploaded by

Lily Villalobos Melgarejo
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOC, PDF, TXT or read online on Scribd
1K views13 pages

Thinker Manual

1. The document provides installation and setup instructions for a smart home router called the "thinker". 2. It explains how to connect the thinker to a wireless network, add and configure it using a mobile app, and set up network settings through a web browser. 3. The document outlines how to control smart home appliances either through remote codes or direct matching, set up intelligent scenes, and access more advanced functions.

Uploaded by

Lily Villalobos Melgarejo
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOC, PDF, TXT or read online on Scribd
You are on page 1/ 13

Home will be always on your side

Thinker
Quick installation guideline

1.Port installation instruction

If Dial-up or connection with the superior router is needed. Please access the

corresponding reticle to the wan port of the router. If the network is under the pattern

of wireless bridge, reticle is not necessary, you can surf the internet directly.

USB USB port


Home will be always on your side

LAN port

WAN/LAN port

MICRO USB power port

2. Connecting to the network

When the thinker is powered on, your phone will scan the QR Code to finish app

installation.

Enter into wifi setting, to search wifi hotspot geeklink and connect to it.

Geeklink connected

Notice: Please use UC browser or other scan tool for QR code scanning. Wechat is not

available for scanning QR code and download. Currently.


Home will be always on your side

3. Adding thinker to the app

App will search surrounding devices automatically if it is the first time you open the

app, app will enter into the main interface when it finds the thinker.

searching

remote control scene devices more

Notice: If app cannot find the thinker, you have to check whether the thinker is
Home will be always on your side

powered on, wifi connect to the geeklink hotspot.

4. App configures thinkers network.

Click the device and choose the current host, and you can configure the external

network connection ways, wifi name, password, as well as the administrators

password of thinker.

thinker

current host extending devices host list

Wifi wifi setting wifi wifi on- off alter network name and
Home will be always on your side

password.

external network setting finish bridging IPstatic IP

B-ISDN account input the B-ISDN account B-ISDN password

input B-ISDN password

administrative password

alter the host name

Restart the thinker

Notice You can configure the external network to dial-up connection (PPPOE)

dynamic IP(DHCP), static IP or wireless bridging.

5. Browser configures thinkers network

Using browser to administrate the routing function of thinker

Open the browser, input the IP address 192.168.1.1, and enter the management

interface of thinker.

Input the user name and password to login in (default username: root password:

123456).
Home will be always on your side

192.168.1.1connecting to 192.168.1.1

usernameroot

password123456

Notice: We have designed a simple configuration guideline for you. You can easily

master the router even though it is the first you use it.

6. Add extending devices

Click device, choose extending device, According to the instruction of extending

device, you can bring the extending device into adding state. Click the add more,

than you can add more devices.


Home will be always on your side

thinker

current host

extending device

host list

add

synchronization

feedback switch
Home will be always on your side

online

device

:warm prompt

Please make sure that the device is on the state of

matching! Press confirm key to continue!

delete confirm

Notice you can acquire the devices list that the current host has extended by

pressing synchronization key.

7. Control the appliance

Using the remote codes

Selected the remote TAB, and click + on the top right corner to enter the remote

control adding interface

Slide the icon above to choose the control type, and then choose devices (room) that

you want to control, then click next key to choose the appliance brands then the

code library test starts, click testing key and observe whether the infrared

appliances work normally, if it is normal then click the confirm key on the top right

corner to save this control. If the appliances do not response normally, then you have

to click the next key to test again.


Home will be always on your side

remote control

air condition

choose devices

thinker

some of the electric appliances the last step matching directly

GREE testing the last one the next one

Matching to control directly

The control type without code library can also control the appliances by learning, the

thinker can automatically generate a remote control module that is suitable for this
Home will be always on your side

type. You can customize the learning of infrared remote control or 315M/433M RF

control. The appliances that have the function of RF matching can dynamically

generate a RF code to match.

customize choose devices thinker finish

remote control customize mode menu collect

setting

socket bulb

matching to generate RF code delete


Home will be always on your side

8. Intelligent scene

condition scene : action

The condition triggers the scene to carry out the order, the scene carry out multi-

action.

The condition can be the 315M RF signal sent out by door contact, human body

detector, gas detector, scene panel.

Action can be a control for the electric appliance, or a sending of an alarming

message.

Scene can set up a triggering condition, or you can make it function only by manually

click
Home will be always on your side

condition scene : action signal triggering

: leave home mode back home mode cinema mode

get up mode gas leak alarm fire alarm

door contact : signal triggering

name

click to trigger the scene triggering condition

timing triggering signal triggering

to trigger the signal not chosen

setting up valid time

add more action alter condition

turn on the light turn on the air-condition


Home will be always on your side

delete

click scene, click the on the top right corner to add a new scene

Scene name setup, for example back home mode. You can turn on the condition

triggering, and there are timing triggering and signal triggering. When you finish

setting, you can click the confirm key on the top right corner to add.

Click scene to enter into the action management interface of scene, then click

add a new action to add a new action for this scene, for example, to turn on the

light. The interval for carrying out the actions can setting as you like.

Notice: Click alter condition to alter the triggering condition of the scene and the

other properties of the scene.

9. More advanced applications

This manual only offers you an simple instruction to use our product, beyond the

above function, our thinker has many other interesting functions. Such as Wechat

control, geeks port and so on. Click more options to find the menu help

documentation. Click and check some more specific advanced user guides.

You might also like