Scribd Logo
Upload

Welcome to Scribd!

  • 89 views

    Helicoptero Eurocopter EC145T2

    Uploaded by

    Jose Maria Ponce Rosillo
    This document provides instructions for building a 1:40 scale model of the Eurocopter EC145T2 helicopter. It includes 3 sentences: The model depicts a Swiss Air Rescue Ambulance company helicopter, with specifications and details about the real EC145T2. Building instructions list the parts and steps to assemble the model, such as gluing bulkheads and tabs in a specific order and mounting the propellers. Cutting out and gluing various cardboard and paper parts constructs the miniature helicopter replica.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd

    Helicoptero Eurocopter EC145T2

    Uploaded by

    Jose Maria Ponce Rosillo
    89 views9 pages
    This document provides instructions for building a 1:40 scale model of the Eurocopter EC145T2 helicopter. It includes 3 sentences: The model depicts a Swiss Air Rescue Ambulance company helicopter, with specifications and details about the real EC145T2. Building instructions list the parts and steps to assemble the model, such as gluing bulkheads and tabs in a specific order and mounting the propellers. Cutting out and gluing various cardboard and paper parts constructs the miniature helicopter replica.

    Original Description:

    helicoptero

    Copyright

    © © All Rights Reserved

    Available Formats

    PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    This document provides instructions for building a 1:40 scale model of the Eurocopter EC145T2 helicopter. It includes 3 sentences: The model depicts a Swiss Air Rescue Ambulance company helicopter, with specifications and details about the real EC145T2. Building instructions list the parts and steps to assemble the model, such as gluing bulkheads and tabs in a specific order and mounting the propellers. Cutting out and gluing various cardboard and paper parts constructs the miniature helicopter replica.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    89 views9 pages

    Helicoptero Eurocopter EC145T2

    Uploaded by

    Jose Maria Ponce Rosillo
    This document provides instructions for building a 1:40 scale model of the Eurocopter EC145T2 helicopter. It includes 3 sentences: The model depicts a Swiss Air Rescue Ambulance company helicopter, with specifications and details about the real EC145T2. Building instructions list the parts and steps to assemble the model, such as gluing bulkheads and tabs in a specific order and mounting the propellers. Cutting out and gluing various cardboard and paper parts constructs the miniature helicopter replica.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    of 9
    At a glance
    Powered by AI
    The document provides information about the Eurocopter EC145T2 helicopter, including its specifications and instructions to assemble a scale model of it.

    The helicopter model being described is the Eurocopter EC145T2.

    The specifications provided for the EC145T2 include its length, height, empty weight, maximum takeoff weight, powerplant details, maximum speed, cruising speed, service ceiling, and rate of climb.

    Bob's Card Models

    www.bobscardmodels.altervista.org and www.zealot.com [Resources]

    Eurocopter EC145T2 Scale: 1:40

    The Eurocopter Group is a global helicopter manufacturing and support company. It is the largest
    in the industry in terms of revenues and turbine helicopter deliveries. Its head office is located in
    France at Marignane (Marseille International Airport).

    The EC145T2T, is the newest 4-ton class twin engine, multi-purpose helicopter in the product range
    of Eurocopter, and has seen more than 800 deliveries worldwide and has accumulated over 3 million
    flight hours

    The livery chosen is that of the Swiss Air Rescue Ambulance company, REGA, whose brave pilots
    are on permanent stand-by in world-wide rescue procedures, often in very difficult weather conditions
    and terrain, and especially in the mountains.

    Specifications (Wikipedia)
    General characteristics
    Crew : 1 pilot
    Capacity : up to seven passengers or two crew and two patients (Air Ambulance variant)
    or 1,455 kg payload
    Length: 12.16 m
    Height: 3.51 m
    Empty weight: 1,455 kg
    Max takeoff weight: 2,910 kg
    Powerplant: 2 Turbomca Arrius 2B2 , 473 kW (634 hp) each or 2 x Pratt & Whitney
    Canada PW206B turboshaft engines rated at 498 kW (668 hp)
    Main rotor diameter: 10.2 m
    Main rotor area: 81.7 m
    Performance
    Max. speed : 287 km/h
    1
    Cruising speed: 254 km/h
    Service ceiling: 6,500 m
    Rate of climb: 7.62 m/s

    ------------------------------------

    Building Instructions

    Print all sheets on between 160 and 230g card, except Instructions and Sheet 6 which should be printed on 80 -
    90g Paper.
    Always carefully fit parts together before gluing, and make minor adjustments if necessary.
    Bright Green areas must be cut out, BUT only after gluing any folds. The Instructions will tell you when!
    Although the model is relatively small, bulkheads have also been used to keep the correct cross-sectional form of
    the fuselage; therefore, they don't have to be glued all around, but rather tacked in place (do not tack on the
    green areas, which will anyway be cut off). The bulkheads should not be pressed in firmly, but loosely,
    otherwise after gluing, an unwanted ribbing effect is seen on the outside.

    NB:
    Parts 1, 2 and 3: These should be cut oversize then bent/folded along the fold lines, then cut to size.
    The parts should be assembled in the following order:

    1. 1-2, 2-3, 3-4L, 3-4R


    2. In nose cone, glue a 5-10g weight.
    3. On 5, close/glue tab a.
    4. Glue 5-4L/4R.
    5. Insert and tack/glue Bulkhead A.
    6. Close/glue tab b on 5.
    7. Insert/glue Bulkhead B.
    8. Close/glue 6.
    9. 7-6, 6/7-5, 8-7.
    10. Glue spacer 13 in place.
    11. Close/glue 9, 10.
    12. Insert C in 9 (1-2mm countersunk)
    13. 9-10, insert D in rear of 10.
    14. 12-9
    15. 11-14: NOTE: Small tabs on 11 must be folded INTO the tube; To aid in inserting 11 through the front
    of 14, first loosely insert a piece of paper from the rear of 14 to hold down the tabs, insert 11, remove
    paper insert.
    16. 11/14-10
    17. 15A and 15B -11
    18. Glue 16 in place
    2
    19. Glue 2 halves of 17 together, previously bending the 4 end fins 90 so that coloured sides point
    INWARDS, then glue on fins 18A and 18B. Glue central fin 19 in place. Insert in slit at end of 14, and
    glue in place.
    20. Assemble and mount rear propeller.
    21. Assemble main Prop with parts 21-22, and cap with 23. Glue onto cocktail stick, and cut to length.
    22. Assemble undercarriage and skids, then glue in place.
    23. Assemble all aerials and glue in place.

    ---oooOooo---

    You might also like