Scribd
Upload
30 views

How To Create Endmill

The document provides instructions for creating an endmill using SolidWorks. It involves: 1. Creating a circle sketch on the front plane and extruding a boss. 2. Creating helix sketches and using cut-sweeps to shape the endmill flutes. 3. Creating additional sketches and patterns to further define the endmill geometry.

Uploaded by

Sahil Sharma
Copyright
© © All Rights Reserved
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
30 views

How To Create Endmill

The document provides instructions for creating an endmill using SolidWorks. It involves: 1. Creating a circle sketch on the front plane and extruding a boss. 2. Creating helix sketches and using cut-sweeps to shape the endmill flutes. 3. Creating additional sketches and patterns to further define the endmill geometry.

Uploaded by

Sahil Sharma
Copyright
© © All Rights Reserved
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
You are on page 1/ 13

HOW TO CREATE ENDMILL

1. Step 1

create circle 50mm dia on the front plane.

2. Step 2

extruded boss/base 250mm.


create sketch on this face.
3. Step 3

something like this

4. Step 4

exit sketch.
create new sketch on the same face.
5. Step 5

create circle 50mm,


create helix:
pitch 300mm
rev. 0,5
start angle 0
clockwise
...exit sketch.
6. Step 6

cut-sweep using sketch and helix

7. Step 7

create sketch on this face:

8. Step 8
Right click on edge - select loop - convert entities.
exit.

9. Step 9

new sketch on same face:


create circle 50mm

10.Step 10
and then create TAPER helix.

11. Step 11

cut-sweep

12.Step 12

create Axis
13.Step 13

circular pattern

14.Step 14

...just sharpen it... :)


Here is the tutorial.

1. Step 1

Front plane>>Sketch.

2. Step 2

Draw this profile.


3. Step 3

Exit the sketch. Right plane>>Sketch.

4. Step 4

Draw a ellipse.
5. Step 5

Exit the sketch. Now curves>>Project curve.

6. Step 6

Select both sketch with projection type sketch on sketch.


7. Step 7

Filled surface.

8. Step 8

Select the curve.


9. Step 9

Thicken it and we have a star.

10.Step 10

Create a axis about top plane and origin.


11. Step 11

Circular pattern the body about axis1 and we have the abstract star pattern.

You might also like