Version:
January 13, 2017
(ZTB)
Ceramic Resonators
Token Electronics Industry Co., Ltd.
Web: www.token.com.tw Taiwan: No.137, Sec. 1, Zhongxing Rd., Wugu District,
New Taipei City, Taiwan, R.O.C. 24872
Email:
[email protected] Tel: +886 2981 0109 Fax: +886 2988 7487
China: 12F, Zhong Xing Industry Bld., Chuang Ye Road,
Nan Shan District, Shen Zhen City,
Guang Dong, China 518054
Tel: +86 755 26055363; Fax: +86 755 26055365
Product Introduction
Token KHz Ceramic Resonators (ZTB) is Murata resonator
CSB compatible.
Features :
Oscillating circuits requiring no adjustment can be designed by utilizing these resonators in conjunction
with transistors or appropriate ICs.
The ZTB series is stable over a wide temperature range and with respect to long-term aging.
Miniature and lightweight, standardized for use in low profile devices.
Highly reliable design with excellent environmental resistance.
The ZTB series comprises fixed, tuned, solid-state devices.
Operation Temperature (-20~+80).
Applications :
Square-wave and sine-wave oscillators.
Clock generator for microprocessors.
Remote control systems.
Token KHz Ceramic Resonators (ZTB) is Murata resonator CSB
compatible. The (ZTB) series ceramic resonators owe their
development to Token's expert technologies and the application
of mass production techniques typically utilized in the
manufacture of piezoelectric ceramic components. Because of
their consistent high quality and high mechanical Q, the (ZTB)
series are ideally suited to remote control unit and
microprocessor applications.
Token Resonators KHz (ZTB) series is designed to provide the
engineer with a rugged, relatively low frequency device in the
frequency range of 190 kHz to 1,250 kHz. Initial frequency tolerance is 0.5 % which compares very
favorably to the nominal 2% ~ 3% requirements of one chip microprocessors. Stability and Aging
Tolerance are tight to 0.3%.
The (ZTB) series conform to the RoHS directive. Token will also produce devices outside these
specifications to meet customer requirements, with comprehensive application engineering and design
support available for customers worldwide. Contact us with your specific needs. For more information,
please link to Token official website Ceramic Resonators.
http://www.token.com.tw Taiwan Factory: +886 2 29810109
Page: 1/5
[email protected] China Factory: +86 755 26055363
Dimensions
Dimensions (Unit: mm; Tolerance: 0.3mm) (ZTB)
Frequency Range W T H S L
(kHz) width thickness height lead space lead length
190~249 13.5 3.6 14.7 10.0 8.0
250~374 11.0 3.6 12.2 7.7 7.0
375~429 7.9 3.6 9.3 5.0 6.0
430~699 7.0 3.5 9.0 5.0 4.0(6.0)
700~1250 5.1 2.2 6.3 2.5 4.0
KHz (ZTB) Series Dimensions
http://www.token.com.tw Taiwan Factory: +886 2 29810109
Page: 2/5
[email protected] China Factory: +86 755 26055363
Technical Characteristics
Technical Characteristics (ZTB)
Frequency Resonant Stability in Aging For Load Capacitance (pF)
Part
Accuracy Impedance Temperature 10 Years
Number
(at 25) () (-20~+80)(%) (%) C1 C2
ZTB82 ~ ZTB189 * 2kHz 20 0.3 0.3 / /
ZTB190D ~ ZTB249D 1kHz 20 0.3 0.3 330 470
ZTB250D ~ ZTB374D 1kHz 20 0.3 0.3 220 470
ZTB375P ~ ZTB429P 2kHz 20 0.3 0.3 120 470
ZTB430E ~ ZTB509E 2kHz 20 0.3 0.3 100 100
ZTB510P ~ ZTB699P 2kHz 30 0.3 0.3 100 100
ZTB700J ~ ZTB999J 0.5% 70 0.3 0.3 100 100
ZTB1000J ~ ZTB1250J 0.5% 100 0.3 0.3 100 100
* Note: ZTB82 ~ ZTB189 series is new products of custom design.
http://www.token.com.tw Taiwan Factory: +886 2 29810109
Page: 3/5
[email protected] China Factory: +86 755 26055363
Test Circuit for MOS IC
Resonator Selection - Test Circuit for MOS IC (ZTB)
Loading Capacitor (C1 & C2):
The stability of the oscillation circuit is mainly determined by the C1 & C2 values. If the load
capacitance is too small, unstable oscillation will occur because of oscillation waveform distortion. If
too high, a stop in oscillation can be expected. When comparing the same IC, oscillation circuits with
lower frequencies require higher capacitance. Token Engineers can help with the circuit design if
needed.
Feedback Resistor (R = 1M):
A Feedback Resistor is used to determine the oscillation circuit bias. The feedback resistance will
contribute to instability if it is too large by reducing feedback. Conversely, if it is too small, increases
in current will be realized thereby reducing gain. Recent developments in IC design allows for the
integration of the feedback resistor in many cases.
KHz (ZTB) Test Circuit for MOS IC
Resonator Optimum - IC Evaluations (ZTB)
Due to the properties of resonators, IC matching must be studied and performed to satisfy oscillation
conditions.
Tolerance is determined by the design of the resonator. However stability and correlation is determined
by the IC evaluation. The microcontroller is evaluated with the resonators to determine the best
possible circuit conditions to achieve stability and stable oscillation.
In addition, frequency correlation is measured to meet the tight initial frequency tolerance required.
For the tight tolerance resonators the IC evaluation must be completed on the final circuit board layout.
The final circuit boards provide the most accurate measurement of the frequency correlation.
This measurement will account for the effects of stray capacitance on the oscillation frequency. Once
the correlation is determined the frequency of the resonator is adjusted to compensate for the
correlation.
http://www.token.com.tw Taiwan Factory: +886 2 29810109
Page: 4/5
[email protected] China Factory: +86 755 26055363
Order Codes
Order Codes (ZTB)
ZTB455E P
Part Number Package
P Bulk
TR Taping Reel
General Information
Token Cuts Resonator Size and Cost
Token's Resonators are made of high stability piezoelectric ceramics that function as a mechanical
resonator. This device has been developed to function as a reference signal generator. The frequency is
primarily adjusted by the size and thickness of the ceramic element. With the advance of the IC
technology, various equipment may be controlled by a single LSI (Large-Scale Integration) integrated
circuit, such as the one-chip microprocessor.
Resonator can be used as the timing element in most microprocessor based equipment. In the future,
more and more applications will use ceramic resonator because of its high stability non-adjustment
performance, miniature size and cost savings.
Typical applications include TVs, VCRs, remote controls and toys, voice synthesizers, automotive
electronic devices, copiers, telephones, cameras, communication equipment.
Token offers a full range of industry standard through hole and surface mount resonators both with and
without internal capacitors. For standard Operating Temperatures (-20 to 80), and for Automotive
applications (-40 to +125), with a wide range of frequencies and frequency stability options.
Additionally, Token Application Engineering and Design capabilities allow for custom design and
characterization requirements that meet the demands of most applications.
http://www.token.com.tw Taiwan Factory: +886 2 29810109
Page: 5/5
[email protected] China Factory: +86 755 26055363
