Scribd
Upload
198 views3 pages

FLB Tank Pump Calculation 7/28/1998 P1: Document No.: Title: Sign Date Made by Rev: Checked by Contract No.: QX0032

This document provides calculations for a centrifugal pump used to pump effluent water. It details the suction and discharge conditions including pipe dimensions, flow rates, pressure losses, and static head. Key findings are that the suction pressure is 0.169 bar gauge, the required NPSH is 1.49 m, the differential pressure across the pump is 0.523 bar, and the discharge pressure is 0.691 bar gauge.

Uploaded by

Ekundayo John
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as XLS, PDF, TXT or read online on Scribd
198 views3 pages

FLB Tank Pump Calculation 7/28/1998 P1: Document No.: Title: Sign Date Made by Rev: Checked by Contract No.: QX0032

This document provides calculations for a centrifugal pump used to pump effluent water. It details the suction and discharge conditions including pipe dimensions, flow rates, pressure losses, and static head. Key findings are that the suction pressure is 0.169 bar gauge, the required NPSH is 1.49 m, the differential pressure across the pump is 0.523 bar, and the discharge pressure is 0.691 bar gauge.

Uploaded by

Ekundayo John
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as XLS, PDF, TXT or read online on Scribd
You are on page 1/ 3

Document No.

:
Title : FLB Tank Pump Calculation Sign Date
Contract No. : QX0032 Made by JPCW 7/28/1998
Rev : P1 Checked by

PUMP's Tag No :
LIQUID : Effluent (essentially water)
SECTION: Centrifugal Pumps
Density kg/m3 998
Viscosity kg/ms 0.001
Pipe Material Carbon Steel
SUCTION CONDITIONS
Maximum Flow
Flow 25 m3/hr
Line Size ID 80 mm
Velocity 1.38 m/s
Reynold's No. 110,289
Roughness e or k 0.05 mm

Friction factor f 0.021

Pipe Length 5m

Friction Losses

Component K No K losses
Entrance 0.5 1 0.5
90 elbow 0.75 3 2.25
45 elbow 0.35 0
Tee, along run 0.4 3 1.2
Tee, as elbow from run 1 0
Tee, as elbow from branch 1 0
0
0
0
Valves K No K losses
Diapragm 2.3 0
Gate 0.17 0
Butterfly 0.24 1 0.24
Ball 0.05 0
Non-Return, swing check 2 0
Non-Return, ball 70 0
0
0
Total K losses 4.19

Head loss = ( f l / d + K losses) u2 / 2 g

Maximum Flow
Pressure Loss 0.0522 bar
Design margin assume 20% 0.0104
Equipment Pressure 0.025 bar gauge
Static Head 2m

Suction Pressure 0.169 bar gauge

NPSH Calculation
Liquid Temperature 20 oC
Vapour Pressure 2291.68 N/m2 = Pa
(NPSH) A 1.49 m

Page___of___
Document No. : 0
Title : FLB Tank Pump Calculatio 0 Sign Date
Contract No. : QX0032 0 Made by JPCW 7/28/1998
Rev : P1 0 Checked by

PUMPS Tag No : 0.000


LIQUID : Effluent (essentially water)
SECTION: Centrifugal Pumps
Density kg/m3 998
Viscosity kg/ms 0.001
Pipe Material Carbon Steel
DISCHARGE CONDITIONS
Maximum Flow
Flow 25 m3/hr
Line Size ID 80 mm
Velocity 1.38 m/s
Reynold's No. 110,289
Roughness e or k 0.05 mm

Friction factor f 0.021

Pipe Length 15 m

Friction Losses

Component K No K losses
Exit 1 0
90 elbow 0.75 6 4.5
45 elbow 0.35 4 1.4
Tee, along run 0.4 8 3.2
Tee, as elbow from run 1 0
Tee, as elbow from branch 1 0
0
0
0
Valves K No K losses
Diapragm 2.3 0
Gate 0.17 0
Butterfly 0.24 2 0.48
Ball 0.05 0
Non-Return, swing check 2 1 2
Non-Return, ball 70 0
0
0
Total K losses 11.58

Head loss = ( f l / d + K losses) u2 / 2 g

Maximum Flow
Pressure Loss 0.1472 bar
Design margin assume 20% 0.0294

Total pressure loss 0.177 bar


Static Head (level above pump) 5 m
Discharge vessel pressure 0.025 bar gauge

Discharge pressure 0.691 bar gauge


Differential pressure 0.523 bar
Differential head 5.325 m
Theoretical Pump Power Requirement 0.36 kW
Contingency 20 %
Actual Pump Power Requirement 0.44 kW

Page___of___
Page___of___

You might also like