Scribd
Upload
184 views3 pages

Qualification of Painters and Sand-Blast

This document provides a qualification test for sand blasting and painting personnel. It records an individual's name, area, project, and date. It evaluates their equipment for sand blasting abrasives and checks for traps, water, and oil. It also assesses their surface cleaning and preparation methods before checking the results as accepted or rejected with a quality control signature. A similar format is followed to qualify painters, documenting their name, area, project details, coating type, application method, temperature, thickness, equipment used, and test results.

Uploaded by

1339979
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
184 views3 pages

Qualification of Painters and Sand-Blast

This document provides a qualification test for sand blasting and painting personnel. It records an individual's name, area, project, and date. It evaluates their equipment for sand blasting abrasives and checks for traps, water, and oil. It also assesses their surface cleaning and preparation methods before checking the results as accepted or rejected with a quality control signature. A similar format is followed to qualify painters, documenting their name, area, project details, coating type, application method, temperature, thickness, equipment used, and test results.

Uploaded by

1339979
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
You are on page 1/ 3

SAND-BLAST PERSONAL QUALIFICATION

NAME: _ DATE:_

AREA: ELEMENT WHERE DO THE TEST


PROJECT: N CONSECUTIVE:_

1.- EQUIPMENT FOR CLEANING ABRASIVE PRESSURE (BLASTED COPPER SLAG)


YES NO

TRAPS
WATER AND
OIL

PHOTO
2.- CLEANING AND SURFACE PREPARATION

BLAST Near White Metal

COMERCIAL WHITE METAL

3.- RESULTS ACCEPTED REJECTED

Quality control
Name, signed and date
QUALIFICATION OF PAINTERS

PHOTO

NAME: DATE:

AREA: PROJECT:

TEST PERFORMED TYPE OF DATE OF DELIVERED BY


TYPE OF ELEMENT COATING No. BATCH APPLY SIGNATURE AND NAME

I. APPLICATION METHOD II. TEMPERATURE AND THICKNESS


WITH AIR Qualified Applications
Temp. Surface C
BY SPRAY
WITHOUT AIR Relative Humidity
Wet thickness Mils
Dry film thickness Mils

III. USE EQUPMENT AND CONTAINERS


WHERE PAINT MIXING

Nordson yes NO
Overlap between passes _%
Cleaned containers Moisture separators
Good Mix
Micro-Test

4.- RESULTS ACCEPTED REJECTED

Quality Control
Name, signed and date

You might also like