Scribd Logo
Upload

Welcome to Scribd!

  • 167 views

    Method Statement - Erection of Main Truss

    Uploaded by

    Ali Waqas
    The document provides safety instructions for erecting the main truss of a structure. Key steps include shifting scaffolding materials into place between 20 and 10 foot horizontal pipes, clamping the pipes with vertical supports and braces, and laying planks. Safety measures are outlined such as tying materials to prevent slipping, erecting handrails with mid rails and toe boards, inspecting ropes, and using safety harnesses and fire blankets to prevent falling sparks during welding.

    Copyright:

    © All Rights Reserved
    Download as XLSX, PDF, TXT or read online from Scribd

    Method Statement - Erection of Main Truss

    Uploaded by

    Ali Waqas
    167 views2 pages
    The document provides safety instructions for erecting the main truss of a structure. Key steps include shifting scaffolding materials into place between 20 and 10 foot horizontal pipes, clamping the pipes with vertical supports and braces, and laying planks. Safety measures are outlined such as tying materials to prevent slipping, erecting handrails with mid rails and toe boards, inspecting ropes, and using safety harnesses and fire blankets to prevent falling sparks during welding.

    Original Description:

    This is method state for erection of trusses

    Copyright

    © © All Rights Reserved

    Available Formats

    XLSX, PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    The document provides safety instructions for erecting the main truss of a structure. Key steps include shifting scaffolding materials into place between 20 and 10 foot horizontal pipes, clamping the pipes with vertical supports and braces, and laying planks. Safety measures are outlined such as tying materials to prevent slipping, erecting handrails with mid rails and toe boards, inspecting ropes, and using safety harnesses and fire blankets to prevent falling sparks during welding.

    Copyright:

    © All Rights Reserved
    Download as XLSX, PDF, TXT or read online from Scribd
    Download as xlsx, pdf, or txt
    167 views2 pages

    Method Statement - Erection of Main Truss

    Uploaded by

    Ali Waqas
    The document provides safety instructions for erecting the main truss of a structure. Key steps include shifting scaffolding materials into place between 20 and 10 foot horizontal pipes, clamping the pipes with vertical supports and braces, and laying planks. Safety measures are outlined such as tying materials to prevent slipping, erecting handrails with mid rails and toe boards, inspecting ropes, and using safety harnesses and fire blankets to prevent falling sparks during welding.

    Copyright:

    © All Rights Reserved
    Download as XLSX, PDF, TXT or read online from Scribd
    Download as xlsx, pdf, or txt
    of 2

    ERECTION OF MAIN TRUSS

    Sr # STEP SAFETY KEY POINT


    1 Shifting of scaffolding material to location Scaffolding material may fall down

    20 ft scaffolding pipe will be horizontally laid


    2 Pipes may be slipped
    on channel just below secondary truss

    10 ft pipe will be laid horizontally on lowest


    3 Pipes may be slipped
    angle of secondary truss
    Both these layers will be clamped with 6 ft
    4 vertical pipes
    These 6 ft vertical pipes will be interlinked with
    5 braces using fixed joints
    Planks will be laid on lowest layer of 10 ft Planks may be slipped and may be fell
    6 horizontal pipes down
    At peripherry of scaffolding plateform, hand Objects may fell down from space
    7 railing will be erected between top and bottom pipe

    Welding or grinding spatters may fall


    8 Working will be started on this plateform down

    Marking of truss will be done as per drawing


    9 Person may be fall down
    for erection.
    rope can be broken through sharp
    10 Material will rigged manually, with rope edges
    Tacking will be done by welder as per marked welding sparks and metal particals may
    11 locations. be fell down
    12 fit ups will be inspected. Person may be fall down
    welding sparks and metal particals may
    After inspection final welding will be done.
    13 be fell down
    S
    PREVENTION / COUNTERMEASURE
    Maximum 20 KG load will be lifted by 2
    persons

    Pipes will be tied to structure with binding


    wire

    Pipes will be tied to structure with binding


    wire

    Planks will be interlinked with binding wire

    Mid rail and toe board will also be erected

    Handrail will be covered with fire cloth, so


    that no spatters or anything may come out
    of canopy

    Person will wear safety harness

    rope inspection will be carried out, area


    will be baricated
    Fire blanets will be tied to the area to
    prevent the sparks
    Person will wear safety harness
    Fire blanets will be tied to the area to
    prevent the sparks

    You might also like