CHATTISGARH ONLINE

HOPE FOR THE BEST & PREPARE FOR THE WORST!!!

HOME EDUCATION RESOURCES NOTES_GK JOBS-NOTIFICATION

Welcome From Google! If you find this page useful,you might want to Subscribe to RSS Feed to have updates.

Get This Widget

--> -->
5: 38: 44 PM. Saturday, 2/4/2016 ADD TO FAVORITES!!! Search

About 36garhonline Chattisgarh State -India About CGPSC, Colleges,

University, Admission in
36garhonline.blogspot.com is the complete EXAM Chhattisgarh is India's 26th state, covers an area of
Online information Portal of state Chhattisgarh and all 135,133 sq km. of the total geographical area of nation Chattisgarh
over India,where one can easily search or can check India and located in Center of India.
Chhattisgarh Public Service Commission, i.e. CGPSC
information about all exams in Chhattisgarh.
examination held by Chhattisgarh State for graduate
Chhattisgarh state of India came into existence on
students and gazette posts, rajya seva posts. To say
Check EXAM PATTERN, Study material, previous year November 1, 2000. Mother tongue of Chhattisgarh is
CGPSC is a Constitutional Body established to conduct
papers, Free Download books for technical Exam In Chattisgarhi.There are 18 districts (initially there was 15
examinations and recruit qualified candidates for
RESOURCE Section. districts) in the state.
appointment to the service of Government of
Chhattisgarh.
Check Monthly Basis Current Affair News and 6 States of India which are bordered with
preparation notes on Notes For GK section. Chhattisgarh state -
Prospective candidates of CGPSC 2011 have to be
# Bihar, Jharkhand and Uttar Pradesh to the north
cautious to enter accurate personal details for
# Andhra Pradesh to the south.
registration. Regular updates regarding advertisements
# Orissa State to the east.
and notifications of CGPSC 2011 can be accessed by
And by the Madhya Pradesh to the west.
creating a registered profile on the official website. To
apply for an examination a candidate must go through the
registration process. The CGPSC main exam will be held
after preliminary exam for CGPSC 2011.

To know more about Chhattisgarh Lokseva Ayog,

CGPSC Exam Result 2010 and Interview Schedule,
Subjects of CGPSC Examinations, CGPSC
Advertisement and CGPSC Syllabus visit our blog.

Solved SAIL(MT) Exam Paper for Mechanical Engineer

Wednesday 27 July 2011 LIVE RADIO NEWS SOURCES
Published by Roma Rahul Gupta for Chhattisgarh Online

Solved SAIL(MT) Exam Paper for Mechanical

Choose Station To Play: Government Exams- Study Notes

Engineer
RESOURCES FOR ALL EXAMS
LATEST JOB NOTIFICATIONS- FROM
There were two part technical and non-tech. Again non-tech 4 parts GK, ALL THE STATES
English, Aptitude
POLL EDUCATION: FOREIGN STUDY
and Reasoning.
Download Employment Newspaper
Technical part was having 100 questions and 100 non tech having 25 LIKE US??? 3

questions each parts.

Time 2 hour 30 mins. 1.30 mins for each part. First you have to do tech after
Archive
Subscribe
that non-tech part. Archive
Posts

Comments
WRITTEN TEST

ShoutBox

1. Technical :
Enter your email address:

Hmm, we can't
Basic fundamentals question from Thermodynamics, Fluid mechanics, hydraulic
machines, RAC, material science, production engineering and industrial Subscribe

reach this page.

engineering, Strength of materials. IC engine, Heat and mass transfer and
Delivered by FeedBurner
power plant.

Try this

NOTE- Direct questions from khurmi objective Mechanical Engineering.

Make sure youve got the
right URL:
CLICK HERE - TO GET FREE SMS
ALERT IN YOUR MOBILE
2. Non-Technical: http://www5.shoutmix.com

Refresh the page

(1) General Knowledge: G.K. was easy comparatively. Label Search for what you
AFCAT (1) want
BARC (1)
1. 2010 Rajiv Gandhi Khel Ratn Award is given to- Sania nehwal
BHEL (5)

BIS (2)
ShoutMix chat widget
2. BIHU is local dance of which state- Asam BOOKS FOR TECHNICAL EXAM
(6)
Census India 2011 (1)
3. 2012 Olympic will organize in- London. CIL (1)
CTET (1)
ECIL (5)
4. Sign of Indian Rupees is made by. D. uday kumar. EIL (7)
FCI (4)
GAIL (7)
5. Brahm Society was established by- Raja Rammohan Ray
GIC (2)
GK 2011 (9)
Govt.Jobs (2)
6. State of max. population in density in India- W.B.
HAL (6)
IBPS (4)
IES (1)
7. Who is the ex-officio of planning commition of india is- P.M..
Intelligence Bureau (1)
International News (5)

8. Which temple is made up by cutting Kailasa Mount- Ajanta, Alora,elephentas KV (2)

etc LIC (1)
MPPKVVCL (1)
National News (5)
9. 20-20 cricket world cup winner of 2010- England NDA (2)
NIC (2)
ONGC (7)
10. Which river drains in Arabian Sea- Tapi. Policies (1)
PSU (1)
QUIZ (6)
11. Which country is recently become the member of SAARC- Myanmar, Sri
RAILWAY QUESTION BANK (3)
lanka, Bhutan etc.
RBI (1)
RRB (2)
SAIL (7)
12. Durand line is in between of which two countries - pak/afganistan.
SBI (1)
SNAP (1)

13. Currency of Bhutan ..And few more SSC (6)

STUDY MATERIAL (5)
UCO (1)
(2) English: Synonyms, preposition, 5 best meaning and 2 para graph having Union Budget 2011-2012 (1)
5 question each. upsc (2)

(3) Aptitude: Profit loss, Ratio and proportion, time and work, simple interest,
compound interest
Blog Stats

1 3 2 3 8 5 4
(4) Reasoning: There was 5 question each from Analogy, Venn diagram,
Statement and conclusion, Direction sense test, cube.

-->
Ad closed by
We'llFor
Google
Aptitude and reasoning was difficult and time taking. R.S Aggarwal is the best try
Drive

for aptitude and reasoning

Work

NOTE- make sure you attempt all the sections to qualify, well I was one of, to
qualify written test.
***************************************************************
********
1.Aptitude in that they have asked most of the questions from percentage ,
profit and loss , problems on train , Simple Interest, Compound Interest,
Calender, Age problems, Time and Work ,H.C.F & L.C.F, average, square roots,
Decimal Fractions, Discount problems, Odd man out and series. Hey freinds
just go through the R.S AGGARWAL.

2.Verbal in that they have asked for meanings, opposites, appropriate words,
Passages, analogy, relational, Coding and decoding ,cubes and dice, statement
and conclusions, Mirror images, Alphabet test, Mathematical Operations, Data
sufficiency. follow Verbal and NON-verbal Reasoning by R.S AGGARWAL.

3.General Awareness this all about general knowledge test of the student. So
try to refer some G.K general questions like some quotations given by great
people like Mahatma Gandhi they will give some quotation n they will ask who
said this quotation like that, next O2 is carried out by red blood cells n some
on nature n some n history n some on current affairs n some on politics n
some on food products like that so try to know some general questions.

4.Technical Test In this they will ask about subject as I am from mechanical
they asked questions from Automobile engineering, Design of machine
members, Strength of materials, Kinematics, MOF, Thermal subject study all
cycles n about working of piston n they have asked some problems from DMM
n some problems on turbines n some of determining speeds so frens do
concentrate up on core subjects which we have in our 2nd and 3rd and 4-1
sem subjects that too core subjects.
Frens we have negative marking for each wrong answer they will deduct 1/4
mark so first try to do only known questions n they try other questions
we will have time for 2hrs and 20mins so try the best.
***************************

Mechanical-Engineering MT 2009
A definite area or space where some thermodynamic process takes place is known as

A thermodynamic system B thermodynamic cycle

C thermodynamic process D thermodynamic law

2. Which of the following is an intensive property of a thermodynamic system?

A volume B Temperature

C mass D energy

3. Temperature at which the volume of the gas becomes 0 is called

A absolute scale of temperature B absolute 0 temperature

C absolute temperature D none of these

4. The unit of energy in SI units is

A joule B joule metre

C watt D joule/metre

5. 1 joule is equal to

A 1 Nm B kNm

C 10 Nm/s D 10 kNm/s

6. In an irreversible process there is a

A loss of heat B no loss of heat

C gain of heat D no gain of heat

7. The following is an SI engine

A diesel engine B petrol engine

C gas engine D none of the above

8. In a 4 stroke cycle petrol engine during suction stroke

A only air is sucked in B only petrol is sucked in

C mixture of petrol and air is sucked in

D none of the above

9. The thermal efficiency of petrol engine as compared to diesel engine is

A lower B higher

C same for same power output D same for same speed

10. Compression ratio of diesel engines may have a range

A 8 to 10 B 10 to 15

C 16 to 20 D none of the above

11 The thermal efficiency of good I.C engine at the rated load is in the range of

A 80 to 90% B 60 to 70%

C 30 to 35% D 10 to 20%

12 Carburettor is used for

A SI engines B gas engines

C CI engines D none of the above

13 In SI engine to develop high voltage for spark plug

A battery is installed B distributor is installed

C carburetor is installed D ignition coil is installed

14 In a four cylinder petrol engine the standard firing order is

A 1-2-3-4 B 1-4-3-2

C 1-3-2-4 D 1-3-4-2

15 The knocking is SI engines increases with

A increase in inlet air temperature B increase in compression ratio

C increase in cooling water temperature D all of the above

16 Petrol commercially available in India for Indian passenger cars has octane

number in the range

A 40 to 50 B 60 to 70
C 80 to 85 D 95 to 100

17 The knocking tendency in C.I engines increases with

A decrease of compression ratio B increase of compression ratio

C increasing the temperature of inlet air D increasing cooling water

temperature

18 The air standard otto cycle comprises

A two constant pressure processes and two constant volume processes

B two constant pressure and two constant entropy processes

C two constant volume processes and two constant entropy processes

D none of the above

19 The thermal efficiency of theoretical otto cycle

A increases with increase in compression ratio

B increases with increase in isentropic index gamma

1. C does not depend upon the pressure ratio

D follows of the above

20 Thermal efficiency of a gas turbine plant has compared to diesel engine plant is

A higher B lower

C same D may be higher or lower

21 Mechanical efficiency of a gas turbine as compared to internal combustion

Reciprocating engine is

A higher B lower

C same D unpredictable

22 For a gas turbine the pressure ratio may be in the range

A 2 to 3 B 3 to 5

C 16 to 18 D 18 to 22

23 Thermal efficiency of a closed cycle gas turbine plant increases by

A reheating B intercooling

C regenerator D all of the above

24With the increase in pressure ratio thermal efficiency of a simple gas turbine

Plant with fixed turbine inlet temperature

A decreases B increases

C first increases and then decreases D first decreases and then increases

25In two stage turbine plant, reheating after first stage

A increases work ratio B decreases work ratio

C does not affect work ratio D none of the above

26For a jet propulsion unit , ideally the compressor work and turbine work are

A equal B unequal

C not related to each other D unpredictable

27 Various kinematic pairs are given below.choose the lower pair

A ball bearings B tooth gears in mesh

C camm and follower D crank shaft and bearing

28The relation between the number of pairs forming a kinematic chain and the

Number of links is

A l=2p-2 B l=2p-3

C l=2P-4 D l=2p-5

29In a reciprocating engine

A crankshaft and flywheel form 2 kinematic links

B crankshaft and flywheel form 1 kinematics links

C crankshaft and flywheel do not form kinematic links

D flywheel and crankshaft separately form kinematic links

30A kinematic chain is known as a mechanism when

A none of the link is fixed

B one of the links is fixed

C two of the links are fixed

D all of the links are fixed

31 Which of the following is an inversion of single slider crank chain?

A beam engine

B watts indicator mechanism

C elliptical trammels
D whitworth quick return motion mechanism

32 control volumes refer to

A a fixed region in space

B a specified mass

C an isolated system

D a closed system

33An isentropic process is always

A irreversible and adiabatic

B reversible and isothermal

C friction less and irreversible

D reversible and adiabatic

34Work done in a free expansion process is

A0

B minimum

C maximum

D positive

35.The figure shows a pin-jointed plane truss loaded at the point M by hanging a mass of
100 kg. The

member LN of the truss is subjected to a load of?

(a) 0 Newton

(b)490 Newtons in compression

(c)981 Newtons in compression

(d) 981 Newtons in tension

36.In terms of.Poissons ratio (v) the ratio of Youngs Modulus (E) to Shear Modulus (G) of
elastic materials is ?

(a)2(1 + v)

(b) 2(1 v)

(c)(1 + v)/2

(d)(1 v)/2

37. Two mating spur gears have 40 and 120 teeth respectively. The pinion rotates at

1200 rpm and transmits a torque of 2O N. m. The torque transmitted by the gear is

(a) 6.6 Nm

(b) 20 Nm

(c) 40 Nm

(d) 60 Nm

38. The figure shows the state of stress at a certain point in a stressed body. The
magnitudes of normal stresses in the x and y direction are 100 MPa and 20 MPa
respectively. The radius of Mohrs stress circle representing this state of stress is

(a)120

(b)80

(c)60

(d)40

39.For a mechanism shown below, the mechanical advantage for the given configuration
is?

(a)0

(b) 0.5

(c)1.0

(d)Infinity

40.A vibrating machine is isolated from the floor using springs. If the ratio of excitation
frequency of vibration of machine to the natural frequency of the isolation system is equal
to 0.5, the transmissibility of ratio of isolation is

(a)1/2

(b)3/4

(c)4/3

(d)2
41. A torque of 10 Nm is transmitted through a stepped shaft as shown in figure.

The torsional stiffnesses of individual sections of lengths MN, NO and OP are 20 Nm/rad
30 Nm/rad and 60 Nm respectively. The angular deflection between the ends M and P of
the shaft is?

(a) 0.5 rad

(b) 1.0 rad

(c) 5.0 rad

(d) 10.0 rad

42.

43. The S-N curve for steel becomes asymptotic nearly at

(a)10 3 cycles

(b) 10 4 cycles

(c)10 6 cycles

(d) 10 9 cycles

44. In the window air conditioner, the expansion device used is

(a)capillary tube

(b) thermostatic expansion valve

(c)automatic expansion valve

(d) float valve

45. During chemical de-humidification process of air

(a) dry bulb temperature and specific humidity decrease

(b) dry bulb temperature increases and specific humidity decreases

(c) dry bulb temperature decreases and specific humidity increases

(d) dry bulb temperature and specific humidity increase

46.An incompressible fluid (kinematic viscosity, 7.4 x 10-7 m2 /s, specific gravity, 0.88) is
held between two parallel plates. If the top.plate is moved with a velocity of 0.5 rn/s while
the bottom one is held stationary, the fluid attains a linear velocity profile in the gap of 0.5
mm between these plates; the shear stress in Pascals on the surface of top plate is ?

(a)0.651 x 10 -3

(b) 0.651

(c)6.51

(d) 0.651 x 103

47.Environment friendly refrigerant R134a is used in the new generation domestic

refrigerators. Its chemical formula is ?

(a)CH ClF2

(b) C2 Cl 3F3

(c)C2 Cl 2F4

(d) C2 H2F4

48.

(a)x2y=0

(b) 2x+y=0

(c)2xy=0

(d) x+2y=0

49. A gas contained in a cylinder is compressed, the work required for compression being
5000 kJ. During the process, heat interaction of 2000 kJ causes the surroundings to the
heated. The change in internal energy of the gas during the process is

(a)7000kJ

(b) 3000kJ

(c)+ 3000 kJ

(d) + 7000 kJ

50.The compression ratio of a gas power plant cycle corresponding to maximum work
output for the given temperature limits of Tmin and Tmax will be

51.

(a)10 microns

(b) 20 microns

(c)30 microns

(d) 60 microns

51.
(a) circular Interpolation clockwise

(b) circular Interpolation counterclockwise

(c) linear Interpolation

(d) rapid feed

52. The mechanism of material removal in EDM process is

(a) Melting and Evaporation

(b) Melting and Corrosion

(c) Erosion and Cavitation

(d) Cavitation and Evaporation

53. Two 1 mm thick steel sheets are to be spot welded at a current of 5000 A. Assuming,
effective resistance to be 200 micro-ohms and current flow time of 0.2 second, heat
generated during the process will be

(a)0.2 Joule

(b) 1 Joule

(c)5 Joule

(d) 1000 Joules

54. In PERT analysis a critical activity has

(a)maximum Float

(b) zero Float

(c)maximum Cost

(d) minimum Cost

55. For a product, the forecast and the actual sales for December 2002 were 25 and 20
respectively. If the exponential smoothing constant (a) is taken as 0.2, the forecast sales
for January 2003 would be ?

(a)21

(b)23

(c)24

(d) 27

56. Misrun is a casting defect which occurs due to

(a) very high pouring temperature of the metal

(b) insufficient fluidity of the molten metal

(c) absorption of gases by the liquid metal

(d) improper alignment of the mould flasks

57. The percentage of carbon in gray cast iron is in the range of

(a)0.25 to 0.75 percent

(b) 1.25 to 1.75 percent

(c)3 to 4 percent

(d) 8 to 10 percent

58.In the figure shown,

the relative velocity of link1 with respect to link 2 is 12 m/sec. Link 2 rotates at a constant
speed of 120 rpm. The magnitude of Coriolis component of aceeleration of link 1 is

(a)302 m/s2

(b)604 m/s2

(c)906 m/s2

(d) 1208 m/s2

59. The figure below shows a planar mechanism with single degree of freedom.

The instant center 24 for the given configuration is located at a position ?

(a) L

(b) M

(c) N

(d)Infinity

60.A uniform stiff rod of length 200 mm and having a weight of 300 N is pivoted at one end
and connected to a spring at the other end.

For keeping the rod vertical in a stable position the minimum value of spring constant K
needed is ?

(a) 300 N/m

(b) 400 N/m

(c) 500 N/m

(d) 1000 N/m

61. In a bolted joint two members are connected with an axial tightening force of 2200 N.

If the bolt used has metric threads of 4 mm pitch, the torque required for achieving the
tightening force is?

(a)0.7Nm

(b)1.0 Nm
 (c)1.4 Nm

(d) 2.8 Nm

Related Posts : SAIL

PO S TED B Y R O M A A T 7 / 2 7 / 2 0 11 11:0 0 :0 0 A M
R EA C TI O N S : funny (0) interesting (4) cool (0)

L A B EL S : S A I L

0 COMMENTS:

POST A COMMENT

Enter your comment...

Comment as: Select profile...

Publish Preview

LINKS TO THIS POST

Create a Link

Newer Post Home Older Post

Subscribe to: Post Comments (Atom)

Recent Post -::@ Disclaimer @::- Followers

The blog content is all collected from source of internet
and also my personal collection for helping students who
are going to step into their new gen world where with Google Connect
challenges are common and I love sharing and if
anybody has any issues on this you can write to me . Members (35) More
Coprights 2011-2012 @
www.36garhonline.blogspot.com

**HOPE FOR THE BEST

AND PREPARE FOR THE WORST**

Already a member? Sign in

Copyright by 36garhOnline |Best viewed on Chrome and FireFox| Developed By Roma Rahul Gupta.. Powered by Blogger.