Scribd
Upload
2K views1 page

How To Activate

The document provides instructions to activate the Deep Fritz x86 and x64 chess programs. For the x86 version, it lists 8 steps including copying and running installation files, entering a provided serial number, and verifying activation. For the x64 version, it states it must be activated after activating the x86 version using the same serial number, and then the x86 version can be uninstalled.

Uploaded by

Conchi Rodríguez Pineda
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as TXT, PDF, TXT or read online on Scribd
2K views1 page

How To Activate

The document provides instructions to activate the Deep Fritz x86 and x64 chess programs. For the x86 version, it lists 8 steps including copying and running installation files, entering a provided serial number, and verifying activation. For the x64 version, it states it must be activated after activating the x86 version using the same serial number, and then the x86 version can be uninstalled.

Uploaded by

Conchi Rodríguez Pineda
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as TXT, PDF, TXT or read online on Scribd
You are on page 1/ 1

Activate Deep Fritz x86:

1. Copy the "CB-Patch 5.1.exe" file in "C:\Program Files


(x86)\ChessBase\ChessProgram14\" folder.

2. Run the "CB-Patch 5.1.exe" patch and follow the instructions.

3. After patching is done, run the "ChessBaseAdminTool.exe" located in the same


directory as above, that is "C:\Program Files (x86)\ChessBase\ChessProgram14\".

4. Click on "Activate Offline" button, and enter the following serial.

Serial: 42TJ4-V3EDM-UNL2R-9E3LG-E6EGL

5. In the Activation Key from website (last line at the bottom of window), enter
any numbers.

6. Input the code from image and click on "OK".

7. Run Deep Fritz 14 from the shortcut on Desktop or in Start Menu. When prompted,
enter the same serial number as above.

8. The serial number must be accepted by the program now. Restart the program.
Enjoy! :-)

-----------------------------------------------------------------------------------
------

Activate Deep Fritz x64:

Deep Fritz 14 x64 cannot yet be activated alone. You will need to install and
activate the x86 version first. Once x64 is activated, you can remove the x86
version if you wish.

Follow these steps.

1. Install and activate Deep Fritz 14 x86 using the steps as described above.

2. Now install the Deep Fritz 14 x64.

3. Run Deep Fritz 14 64Bit from Desktop or Start Menu and enter the same serial as
in x86 version.

4. If you had activated x86 properly and completely (all 8 steps above), x64 will
accept the serial. Restart the x64 program.

5. You can now remove x86 version if you like. x64 version will remain activated.

6. Enjoy! ;-)

You might also like