Scribd
Upload
340 views

Asterisk REST Interface Users Module User Guide - PBX GUI - Documentation

The document discusses the Asterisk REST Interface Users module in FreePBX. It allows creating users for the Asterisk REST Interface and includes settings like the username, password, password type (crypt or plain text), and read-only access. The module requires Asterisk version greater than 12 and can be enabled or disabled under advanced settings in FreePBX.

Uploaded by

Sammy Manuel Dominguez
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
340 views

Asterisk REST Interface Users Module User Guide - PBX GUI - Documentation

The document discusses the Asterisk REST Interface Users module in FreePBX. It allows creating users for the Asterisk REST Interface and includes settings like the username, password, password type (crypt or plain text), and read-only access. The module requires Asterisk version greater than 12 and can be enabled or disabled under advanced settings in FreePBX.

Uploaded by

Sammy Manuel Dominguez
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 2

PBXGUI / / AsteriskRESTInterfaceUsersModule

AsteriskRESTInterfaceUsersModuleUserGuide
CreadoporTheJames,modificadoporltimavezporPrestonMcNairelsep30,2016

Introduction
LoggingIn
FirstRun
EnabletheAsteriskRESTInterface
PrettyPrintJSONResponses
AddingUser
RESTInterfaceUserName
RESTInterfaceUserPassword
PasswordType
Crypt
PlainText
ReadOnly

Introduction
TheAsteriskRESTInterfaceUsermoduleisusedtocreateusersfortheAsteriskRestInterface.
ThismodulerequiresanAsteriskversiongreaterthan12.
ThismodulemustbeenabledunderAdvancedSettings

LoggingIn
LogintotheFreePBXUI.
OnthetopmenuclickSettings
InthedropdownclickAsteriskRESTInterfaceUser

FirstRun

Themodulemaybedisabledunderadvancedsettings.
OnthetopmenuclickSettings
InthedropdownclickAdvancedSettings

EnabletheAsteriskRESTInterface
WhetherornottheAsteriskRESTinterfaceshouldbeenabled.

PrettyPrintJSONResponses
ShouldtheJSONresponsesbemade"Pretty"
AddingUser

RESTInterfaceUserName
UsernameforRESTAPIcalls

RESTInterfaceUserPassword
PasswordforRESTAPIcalls

PasswordType

Crypt
StorethepasswordCrypt(3)encrypted

PlainText
StorethepasswordinPlainText

ReadOnly
Shouldthisuserbeabletoreadonlyorshouldtheyhavewriteaccess.

You might also like