Scribd
Upload
146 views1 page

PostFoundation 1

The document contains calculations for the design of a pole foundation including: - Wind loads on the pole were calculated based on ASCE 7-05 standards. - An iterative method was used to calculate the required diameter and penetration depth of the foundation to resist the lateral loads on the pole. - The final recommended diameter is 24 inches and penetration depth is 8 feet.

Uploaded by

امين الزريقي
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as XLS, PDF, TXT or read online on Scribd
146 views1 page

PostFoundation 1

The document contains calculations for the design of a pole foundation including: - Wind loads on the pole were calculated based on ASCE 7-05 standards. - An iterative method was used to calculate the required diameter and penetration depth of the foundation to resist the lateral loads on the pole. - The final recommended diameter is 24 inches and penetration depth is 8 feet.

Uploaded by

امين الزريقي
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as XLS, PDF, TXT or read online on Scribd
You are on page 1/ 1

PROJECT: JOB NO: Designed:

CLIENT: TITLE: Checked:


SUBJECT: POLE FOUNDATION

'file:///conversion/tmp/scratch/359433682.xls'#$Pole Foundation

qz= 36.32 psf from ASCE 7-05


Gust factor= 0.85
Cf= 1.2
Wind pressure=Cf*G*qz= 0.03705 ksf 0.000 d: Footing diameter (in.)

Appl. Elev. W d P P apl'd: Total Lateral Force (k)


12 3.00 24 H W Load Tributary width (ft)
H Force appl. Height (ft)
A Footing resisting area (ft2)
M= 32.01 K-Ft at the top of foundation D D: Penetration depth (ft)
As per Florida Building Code(1819.7.2.1) Unconstrained d
S= 0.20 Ksf Table 1819.6
D initial= 5.00 ft A=2.34 P/(S1*d) D=0.5A[1+[1+(4.36H/A)]^1/2]
Penetration Depth (Final): D= 8.00
Iteration table:
H W, Trib. Width d P apl'd. H S1=2S*D/3 D A D
12 3 24 2.667 12 0.67 5.00 4.68 10.51 0
12 3 24 2.667 12 1.40 10.51 2.23 6.97 0
12 3 24 2.667 12 0.93 6.97 3.36 8.56 0
12 3 24 2.667 12 1.14 8.56 2.74 7.72 0
12 3 24 2.667 12 1.03 7.72 3.03 8.13 0
12 3 24 2.667 12 1.08 8.13 2.88 7.92 0
12 3 24 2.667 12 1.06 7.92 2.95 8.02 0
12 3 24 2.667 12 1.07 8.02 2.92 7.97 0
12 3 24 2.667 12 1.06 7.97 2.94 8.00 <-USE
0 0 0 0.000 0 0.00 0.00 0.00 0.00 0
0 0 0 0.000 0 0.00 0.00 0.00 0.00 0
0 0 0 0.000 0 0.00 0.00 0.00 0.00 0
0 0 0 0.000 0 0.00 0.00 0.00 0.00 0
0 0 0 0.000 0 0.00 0.00 0.00 0.00 0
0 0 0 0.000 0 0.00 0.00 0.00 0.00 0
0 0 0 0.000 0 0.00 0.00 0.00 0.00 0
0 0 0 0.000 0 0.00 0.00 0.00 0.00 0
0 0 0 0.000 0 0.00 0.00 0.00 0.00 0
0 0 0 0.000 0 0.00 0.00 0.00 0.00 0
0 0 0 0.000 0 0.00 0.00 0.00 0.00 0
0 0 0 0.000 0 0.00 0.00 0.00 0.00 0
0 0 0 0.000 0 0.00 0.00 0.00 0.00 0
0 0 0 0.000 0 0.00 0.00 0.00 0.00 0
0 0 0 0.000 0 0.00 0.00 0.00 0.00 0
0 0 0 0.00 0 0.00 0.00 0.00 0.00 0
0 0 0 0.00 0 0.00 0.00 0.00 0.00 0
0 0 0 0.00 0 0.00 0.00 0.00 0.00 0
0 0 0 0.00 0 0.00 0.00 0.00 0.00 0
0 0 0 0.00 0 0.00 0.00 0.00 0.00 0
0 0 0 0.00 0 0.00 0.00 0.00 0.00 0
0 0 0 0.00 0 0.00 0.00 0.00 0.00 0
0 0 0 0.00 0 0.00 0.00 0.00 0.00 0
0 0 0 0.00 0 0.00 0.00 0.00 0.00 0
0 0 0 0.00 0 0.00 0.00 0.00 0.00 0
0 0 0 0.00 0 0.00 0.00 0.00 0.00 0
0 0 0 0.00 0 0.00 0.00 0.00 0.00 0
0 0 0 0.00 0 0.00 0.00 0.00 0.00 0
0 0 0 0.00 0 0.00 0.00 0.00 0.00 0
0 0 0 0.00 0 0.00 0.00 0.00 0.00 0

You might also like