New Holland T4030
New Holland T4030
New Holland T4030
ELECTRICAL
Battery, volts 12 12 12 12
Battery, cca 730 730 800 800
Alternator, amps 85 85 120 120
Cold start aid Grid heater Grid heater Grid heater Grid heater
TRANSMISSION
Choice of transmissions
.......................16F x 16R Synchro Command transmission with your choice of mechanical shuttle or.......................
clutchless power shuttle (all models)
Clutch type / size (mechanical), in. (mm) ............................................. Dry / 11 (280) diameter, heavy-duty cerametallic material .............................................
Clutch type / size (electrohydraulic), in. (mm) ......................................................... Wet / six plates 5.2 (133), organic material ........................................................
Gears: 2 8 mph working range** ..............................................................12 x 12 7 gears | 16 x 16 9 gears ..............................................................
Gears: <1 mph** ..............................................................12 x 12 0 gears | 16 x 16 3 gears ..............................................................
Maximum speed**, mph (kph) ........................................12 x 12 18.73 (30.14) | 16 x 16 18.73 (30.14) or 23.5 (37.8) ........................................
PTO
Type Fully independent Fully independent Fully independent Fully independent
Base equipment PTO speed, RPM 540 540 540 540
Optional PTO speed, RPM N/A N/A 540/1000 540/1000
Operator control ....................................................................T4000 Standard mechanical ....................................................................
...................................................T4000 Deluxe / Deluxe Supersteer Servo-assist ...................................................
PTO clutch .......................................................... Dry, mechanical, 11-in. dry, organic plate ..........................................................
Engine speed ................................................................ 2196 engine rpm at 540 PTO rpm ................................................................
3-POINT HITCH
Category II / I II / I II / I II / I
Draft sensing ...................................................................Mechanical, lower link sensing ...................................................................
Std. ASAE lift capacity @ 24 in., lbs. (kg) 3962 (1800) 3962 (1800) 3962 (1800) 3962 (1800)
Link arms Flexible Flexible Flexible Flexible
Stabilizers Telescoping Telescoping Telescoping Telescoping
Upper / lower limit setting Lift-O-Matic Lift-O-Matic Lift-O-Matic Lift-O-Matic
Page 1 of 3
More user manuals on ManualsBase.com
New Holland
T4000 Series Utility Tractor Specifications
T4020 T4030 T4040 T4050
REAR AXLE
Type Flange Flange Flange Flange
Diff lock engagement Mechanical Mechanical Mechanical Mechanical
Track adjustment, in. (mm) 49.6 76.1 (1260 1932) 49.6 76.1 (1260 1932) 49.6 76.1 (1260 1932) 49.6 76.1 (1260 1932)
Dimension across flange, in. (mm) 61.5 (1562) 61.5 (1562) 61.5 (1562) 61.5 (1562)
Axle capacity, lbs. (kg) 8157 (3700) 8157 (3700) 8157 (3700) 8157 (3700)
FRONT AXLE
2WD
Track adjustment, in. (mm) 53.7 79.9 (1365 2031) 53.7 79.9 (1365 2031) 53.7 79.9 (1365 2031) 53.7 79.9 (1365 2031)
Axle capacity (restricted), lbs. (kg) 6613 (3000) 6613 (3000) 6613 (3000) 6613 (3000)
Axle capacity, lbs. (kg) 4630 (2100) 4630 (2100) 4630 (2100) 4630 (2100)
Maximum steering angle, degrees 55 55 55 55
Oscillation, degrees 11 11 11 11
FWD
FWD engagement T4000 Standard Mechanical Mechanical Mechanical Mechanical
FWD engagement T4000 Deluxe ............................w/mechanical shuttle mechanical engagement.............................
............................w/power shuttle electrohydraulic engagement ............................. Electrohydraulic
SuperSteer front axle N/A Auto FWD management N/A Auto FWD management
Track adjustment, in. (mm) .......................................................................60.8 76.6 (1545 1945).......................................................................
Diff lock engagement ....................................................................T4000 Standard limited slip ....................................................................
.....................................................T4000 Deluxe electrohydraulic differential lock .....................................................
Axle capacity (restricted), lbs. (kg) 7937 (3600) 7937 (3600) 7937 (3600) 7937 (3600)
Axle capacity, lbs. (kg) 5511 (2500) 5511 (2500) 5511 (2500) 5511 (2500)
Maximum steering angle FWD, degrees 55 55 55 55
Maximum steering angle SuperSteer, degrees N/A 76 N/A 76
Oscillation, degrees 11 11 11 11
DIMENSIONS
Operators station ..............................................................T4000 Series Standard open station..............................................................
.......................................................................T4000 Series Deluxe cab.......................................................................
......................................T4000 Series Supersteer - open station / cab (T4030 & T4050 only) .....................................
Platform type, cab / ROPS ...................................................................ISO mounted, straddle platform...................................................................
Wheelbase (2WD), in. (mm) ........................Standard 83.3 (2115) ......................... .........................Standard 86.7 (2202) ........................
..........................Deluxe 85.6 (2175) ........................... ...........................Deluxe 89.0 (2262) ..........................
Wheelbase (FWD), in. (mm) ........................Standard 80.2 (2038) ......................... .........................Standard 83.7 (2125) ........................
..........................Deluxe 82.6 (2098) ........................... ...........................Deluxe 86.0 (2185) ..........................
Wheelbase (Supersteer), in. (mm) N/A 94.8 (2408) N/A 98.2 (2495)
Overall length - standard, in. (mm) 135.2 (3433) 135.2 (3433) 138.6 (3520) 138.6 (3520)
Deluxe, in. (mm) 137.5 (3493) 137.5 (3493) 140.9 (3580) 140.9 (3580)
Supersteer, in. (mm) N/A 137.5 (3493) N/A 140.9 (3580)
ROPS height (folded)**, in. (mm) 77.8 (1976) 77.8 (1976) 77.8 (1976) 77.8 (1976)
Cab height**, in. (mm) 91.4 (2322) 91.4 (2322) 91.4 (2322) 91.4 (2322)
Page 2 of 3
More user manuals on ManualsBase.com
New Holland
T4000 Series Utility Tractor Specifications
T4020 T4030 T4040 T4050
TIRE OPTIONS
R1 General Farming great for a wide variety of agricultural applications.
R3 All Weather great for highway mowing, parks, orchards and light industrial applications.
R4 Industrial great for light industrial applications, rental yards, contractors and municipalities.
Galaxy Turf Special great for golf courses and stadium grounds maintenance.
*Approximate weights for base tractor with full fuel tank; 16.9 x 28R1 rear tires and 9.5L x 15 (2WD) or 12.4R20 (FWD) front tires; mechanical shuttle transmission; without front weights or
rear wheel weights; or rear wheel weights; single rear remote valve
OPTIONAL EQUIPMENT
Second rear remote valve (lever controlled) 540/1000 rpm PTO (T4040/T4050 only) Seat armrests
Third rear remote valve (lever controlled) Grill guard Rotary beacon (cab only)
Fourth rear remote valve (lever controlled Fixed external mirrors (cab only) Engine block heater
available on T4000 Deluxe and Deluxe SuperSteer Telescoping external mirrors (cab only) Offset drawbar for Galaxy turf
Mid-mount valve with joystick control Horizontal exhaust kit Drawbar clevis
Back-up alarm wiring kit Blue fiberglass canopy Low profile 2WD front axle
Horn White fiberglass canopy Carbon filters
Front weight bracket kit Steel FOPS canopy Full width coverage fenders extension
Rear wheel weights Front fenders for FWD front axle (Deluxe SuperSteer only)
88 lb. front weights Air ride seat (cab only) Rear window wiper and washer
Visit our Web site at www.newholland.com/na. Or, call toll-free 866-NEW-HLND (866-639-4563).
Design, materials and/or specifications are subject to Safety begins with a thorough understanding of
change without notice and without liability therefor. the equipment. Always make sure you and
Specifications are applicable to units sold in Canada, the your operators read the Operators Manual
United States, its territories and possessions, and may before using the equipment. Pay close
var y outside these areas. attention to all safety and operating
decals and never operate machinery
without all shields, protective devices
and structures in place.
2008 CNH America LLC Page 3 of 3
New Holland is a registered trademark of CNH America LLC.