Modification and Optimization of Invert Vertical Drawing Machine IVD 800
Uploaded by
M.Saravana Kumar..M.EModification and Optimization of Invert Vertical Drawing Machine IVD 800
Uploaded by
M.Saravana Kumar..M.EMODIFICATION AND OPTIMIZATION OF
INVERT VERTICAL DRAWING MACHINE
IVD 800
A PROJECT REPORT
Submitted by
KARTHICK S - 98608114017
GOWTHAM A B - 98608114011
VIMAL RAJ K - 98610114059
In partial fulfillment for the award of the degree
of
BACHELOR OF ENGINEERING
in
MECHANICAL ENGINEERING
VELAMMAL COLLEGE OF ENGINEERING AND TECHNOLOGY,
MADURAI.
ANNA UNIVERSITY:: CHENNAI 600 025
APRIL 2012
ANNA UNIVERSITY: CHENNAI 600 025
BONAFIDE CERTIFICATE
Certified that this Project report MODIFICATION AND OPTIMIZATION OF
INVERT VERTICAL DRAWING MACHINE IVD 800 is the bonafide work of
KARTHICK S- 98608114017
GOWTHAM A B- 98608114011
VIMAL RAJ K-98608114059
who carried out the project work under my supervision.
Dr. G. MANIKANDAN M.E., Ph.D. Mr. S. BOOPATHI M.E., (Ph.D.)
Professor and Head Supervisor
Department of Mechanical Engineering Department of Mechanical Engineering
Velammal College of Engg & Tech Velammal College of Engg & Tech
Viraganoor, Madurai-625009 Viraganoor, Madurai-625009
Submitted for the Project Viva voce held on at
Velammal College of Engineering & Technology, Madurai.
INTERNAL EXAMINER EXTERNAL EXAMINER
ACKNOWLEDGEMENT
At this outset we would like to thank our Chairman
Shri. M. V. MUTHURAMALINGAM and in addition our Principal,
Dr. N. SURESH KUMAR for motivating us to do Innovative Projects.
We are acquiescing our gratifying thanks to Dr. G. MANIKANDAN,
Head of the Department, Mechanical Engineering, who provided us the splendid
opportunity by introducing ground-breaking ideas and allowed us to use the CAD
Lab for creating models and others labs as and when required.
We are very much indebted to our respectable guide Mr. S. BOOPATHI,
Assistant Professor, Department of Mechanical Engineering who gave us timely
advices, sufficient technical and moral support throughout the project tenure.
We are also very much grateful to our Industrial guide
Mr. P. SELVARAJ, Assistant Manager, Raw Materials division, TVS Sundaram
Fasteners Ltd who gave us an idea of the problem and helped us by providing
necessary materials and guided us for completing the project.
It gives us immense pleasure to thank all our Department faculties for their
massive support throughout our Project Work. We also thanks all the supervisors
and technicians at the Raw Materials Division of TVS Sundaram Fasteners Ltd,
who took painstaking efforts to explain us the process and provided all the
support and guidance needed to complete the process.
Our special thanks to all our non teaching faculties who was always a
helping hand to overcome all sorts of hurdles during lab works. We also thank all
our friends who offered their support at essential times.
