Scribd
Upload
1K views

Moshell Commands

This document contains commands and examples for monitoring and troubleshooting UMTS and LTE networks. Some key commands include pmx to display counter values from statistics files, pmr to generate performance metric reports, lga to view alarm logs, and ue print to view user equipment and bearer information for LTE networks. It also provides examples of using parameters, filters, and time ranges with these commands.

Uploaded by

Rui Belo
Copyright
© © All Rights Reserved
Available Formats
Download as TXT, PDF, TXT or read online on Scribd
1K views

Moshell Commands

This document contains commands and examples for monitoring and troubleshooting UMTS and LTE networks. Some key commands include pmx to display counter values from statistics files, pmr to generate performance metric reports, lga to view alarm logs, and ue print to view user equipment and bearer information for LTE networks. It also provides examples of using parameters, filters, and time ranges with these commands.

Uploaded by

Rui Belo
Copyright
© © All Rights Reserved
Available Formats
Download as TXT, PDF, TXT or read online on Scribd
You are on page 1/ 4

UMTS:

h pmx -> help do comando

lt all -> para ver tudo

q -> quit
help -> lista os comandos

alt -> ver alarmes no nodeB

uer -r iublink -> ver users por servio instantaneo por imsi

cedr -r iublink (Iub_CITIC_UMTS) -> ver users por servio instantaneo

fget UeRc=16 gsmHoAllowed

get . Grace -> ver grace period


get . Nomeparam -> obter valor do parametro
set . Nomeparam x -> set do parametro com valor "x"
set RncFunction=1,UtranCell=ZON12EU,Hsdsch=1 numHsPdschCodes 2

rdel RncFunction=1,UtranCell=PANGUBU,CoverageRelation=1 -> delete coverage


relation

lgorn -s 20130409.0000 -e 20130409.2300 -> ver parametros alterados no RNC

lgoaern -s 20130310.0000 -e 20130312.2300 -> ver alarmes, eventos, alteraes de


parametros na RBS

pmx[h] -m [0.25] UtranCell[=utranCell] [pmNoFailedRabEstAttempt]Q


[h] - coloca na horizontal
[0.25] -> 0.25 last 15 min
[1] -> last hour
[=CCTAAU] : se no colocar nada para todas as clulas do RNC
[pmNoFailedRabEstAttempt]: pode ser like uma palavra do contador

pmxn utrancell pmNoFailedRabEstAttempt -m 0.25 -> agrega todos os rops de todas


as clulas

pmx-m 0.25 UtranCell=8127|utrancell=8128 pmNoFailedRabEstAttempt|


pmNoFailedRabEstAttempt

pmr -s 20130410.1500 -e 20130410.1700


KPIs do RNC. Aps set do comando podemos escolher que KPIs ver. (3)

pmr -g utrancell=FIL13AU
KPIs do RNC s para as clulas FIL13*. Aps set do comando podemos
escolher que KPIs ver. 3 = ROP

pmr -g utrancell=8122|utrancell=8123|utrancell=8124|utrancell=8125|
utrancell=8126|utrancell=8127|utrancell=8128|utrancell=8129|utrancell=8130|
utrancell=8131|utrancell=8132|utrancell=8133|utrancell=8134|utrancell=8135|
utrancell=8136|utrancell=8139|utrancell=8140|utrancell=8142|utrancell=8143|
utrancell=3254 -m 0.25 -r 14,15,16,17,18,19,20,21,22,23
-r escolhe logo as opoes do PMR . Opoes por clula

pmr -g utrancell=8122|utrancell=8123|utrancell=8124|utrancell=8125|
utrancell=8126|utrancell=8127|utrancell=8128|utrancell=8129|utrancell=8130|
utrancell=8131|utrancell=8132|utrancell=8133|utrancell=8134|utrancell=8135|
utrancell=8136|utrancell=8139|utrancell=8140|utrancell=8142|utrancell=8143|
utrancell=3254 -m 0.5 -r 3
-r escolhe logo as opoes do PMR -> opo 3 mostra com este comando o
agregado destas clulas

pmr -m 0.25
KPIs do RNC para last rop

lh mod<x> codetree -cid <cellid>


x = numero do mdulo (iublink)
cellid = cellid

h <nome_comando> -> help do comando

alt , ala, altk >> (used for Alarms information)

St Cell >> (Cell state line enable or disable)

Get . Parameter name ( for any parameter and String related information)

St IP >> (for IP Site)

St E1 EN >> (For ATM Site)

Get Iub >> (Iub Information)

Get . Transport >> ( to check weather the site on IP or ATM or dual)

Get 0 >> ( RBS Information)

Cabx >> (Cabinet related Information)

Inv >> (Complete HW/SW inventory. Includes information about RPUs, licensing, JVM,
devices, XPs, ISL, etc.)

Invh >> (Hardware inventory)

Invl >> (licensing inventory)

Lga >> (Alarm log information)

Lgv >> (Availability log)

Lgu >> (Upgrade log (Trace.log and Trace.log_old). History of system upgrades)

Lgd >> (Downtime log. History of node outages.)

>> get . output

Some examples of lg commands

>> lga -s 20050705 -e 20050710 --> show alarm log entries between the dates
20050705 and 20070710
>> lgx -m 14 --> show alarms that were active 14 days ago
>> lgar -m 10d -p 30m --> refetch the alarm log and show all its entries starting
from 10 days ago and until 30 minutes from then.

Pmx >> (Display counter values,extracted from the statistics ROP files)

pmx . pmpropagationdelay m 2 a (for propagation delay RNC login)

pmxh prach pmpropagationdelay -s 20121007.1200 -e 20121008.1200 -d -a

Pmr >> (Produce PM KPI reports, based on counter values in statistics ROP files and
formulas in CPI documentation)

Pget PP >> (e1 errors and unavailability)

>> Get . Userplane


>> Lget tma
>> lh asc dbg vswr 0 get -k
>> lh ru fui get vswr
>> Lh asc asc vswr (and this one is good for where asc is placed)

>> Get . Userplane


>> Lget tma
>> Get . electrical ant (electrical tilt check)
>> Get . mechnical ant (mechnical tilt check)
>> St ima (checking IMA link)
>> Bo (you can check whether site is OBIF or not)
>> get . maxdl (max downlink power capability)
>> get . maxdl (max downlink power capability)
>> Lst cell (list of cells including operational state)
>> cvls (to see which configurations are available on a node)
>> get radio (Show the users connected in each cell)
>> get local (Show the local cell parameters)
>> get nodebfunction (Show the local cell parameters)
>> license server (Show the all about license)
>> get . grace (Time to expire the grace period of license)
>> get rbslocalcell (List of all cells including parameters)
>> get . noofrad (Number of radio links per cell)

>> lga (Alarm log for 24 hours)

pmxh -m 1 -a . pmsetup|pmSetupFailuresSf128|pmSetupFailuresSf64|
pmSetupFailuresSf16|pmSetupFailuresSf8|pmSetupFailuresSf32

>> lgai (Alarm log command)

>> ma relation_group UtranCell=68971,UtranRelation=. frequencyRelationType 1


>> get relation_group mobilityRelationType

LTE:
moshell <site_name> or <ip_address_O&M>

iacrh ping -src 100.77.16.13 -dst 100.77.16.87

iacrh traceroute -src 100.77.16.13 -dst 100.77.16.87

lst TermPointToENB -> lista os termoint em ver de mostrar o conteudo como o


get

inv -> mostra o inventario de Hw do eNB + Licenses

ue print -admitted -> numero de beares instantaneo

ue print -ue -allcell -v -> numero de users por celula com ref de mme

ue print -bearer -> numero de users por celula com ref de mme

You might also like