Scribd Logo
Upload

Welcome to Scribd!

  • 279 views

    Round 2 Combined

    Uploaded by

    api-362416767
    The document contains a parts list for an air filter humidifier assembly with 11 items. It lists the item numbers, part numbers, quantities, and descriptions of each part. It also contains engineering drawings for 3 subassemblies: the top air filter case subassembly, bottom air filter case subassembly, and the air filter holder part. The drawings provide dimensions, tolerances, and notes for each part.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd

    Round 2 Combined

    Uploaded by

    api-362416767
    279 views18 pages
    The document contains a parts list for an air filter humidifier assembly with 11 items. It lists the item numbers, part numbers, quantities, and descriptions of each part. It also contains engineering drawings for 3 subassemblies: the top air filter case subassembly, bottom air filter case subassembly, and the air filter holder part. The drawings provide dimensions, tolerances, and notes for each part.

    Original Title

    round 2 combined

    Copyright

    © © All Rights Reserved

    Available Formats

    PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    The document contains a parts list for an air filter humidifier assembly with 11 items. It lists the item numbers, part numbers, quantities, and descriptions of each part. It also contains engineering drawings for 3 subassemblies: the top air filter case subassembly, bottom air filter case subassembly, and the air filter holder part. The drawings provide dimensions, tolerances, and notes for each part.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    279 views18 pages

    Round 2 Combined

    Uploaded by

    api-362416767
    The document contains a parts list for an air filter humidifier assembly with 11 items. It lists the item numbers, part numbers, quantities, and descriptions of each part. It also contains engineering drawings for 3 subassemblies: the top air filter case subassembly, bottom air filter case subassembly, and the air filter holder part. The drawings provide dimensions, tolerances, and notes for each part.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    of 18
    At a glance
    Powered by AI
    The document contains engineering drawings and specifications for an air filter assembly.

    The assembly contains an air filter holder, fan holder, end caps, shoulder screw, nut, clevis pin, cotter pin, wing nuts, and water holder.

    The components are numbered and labeled according to the bill of materials which lists the part number, quantity, and description for each item.

    ITEM NO. PART NUMBER QTY.

    DESCRIPTION
    1 M-160L1C-004 1 Machined Rod
    2 2 M-160L1C-005 1 Top Clamp
    3 P-160L1C-001 1 Clamp Shoulder Screw
    4 P-160L1C-002 1 Narrow Hex Nut
    5 5 P-160L1C-003 1 Clevis Pin
    6 P-160L1C-004 1 Reusable Cotter Pin
    7 SA-160L1C-001 1 Air Filter Case (Top) Subassembly

    6 8 SA-160L1C-002 1 Air Filter Case (Bottom) Subassembly

    9 P-160L1C-005 4 Fan Insert


    10 P-160L1C-006 8 Wing Nut
    11 SA-160L1C-003 1 Water Holder
    1

    10

    UNLESS OTHERWISE SPECIFIED:


    DIMENSIONS IN INCHES

    TOLERANCES:
    .XX .01 .XXX .005
    FRACTIONS 1/64
    ANGULAR MACHINED .5
    ANGULAR BEND 1
    SURFACE FINISH TITLE:
    11 BREAK ALL EDGES .030 AIR FILTER HUMIDIFIER
    SIZE: DATE: DRAWN BY:

    C 11/22/2015 CHLOE LIM CHL28


    DO NOT SCALE MATERIAL: PART #: REV:

    SHEET 1 OF 1 - A-160L1C-001 1
    ITEM NO. PART NUMBER DESCRIPTION QTY.

    1 M-160L1C-001 Air Filter Holder 1


    2 M-160L1C-002 Fan Holder 2
    3 M-160L1C-003 End Caps 2

    90.00
    0.125 0.125
    GTAW GTAW
    A

    DETAIL A
    SCALE 1 : 2

    0.125 1 0.125 1
    GTAW GTAW

    UNLESS OTHERWISE SPECIFIED:


    DIMENSIONS IN INCHES

    TOLERANCES:
    .XX .01 .XXX .005
    FRACTIONS 1/64
    ANGULAR MACHINED .5
    ANGULAR BEND 1
    125 TITLE:
    SURFACE FINISH
    BREAK ALL EDGES .030 AIR FILTER CASE (TOP) SUBASSEMBLY
    SIZE: DATE: DRAWN BY:

    DO NOT SCALE
    B 11/19/2015 STEFAN ROESELER
    MATERIAL: PART #: REV:
    SHEET 1 OF 1 - SA-160L1C-001 0
    ITEM NO. PART NUMBER DESCRIPTION QTY.
    1 M-160L1C-001 Air Filter Holder 1
    2 M-160L1C-002 Fan Holder 2
    3 M-160L1C-003 End Caps 2

    1
    2

    90.00

    0.125
    GTAW
    0.125
    GTAW
    A

    3
    DETAIL A
    SCALE 1 : 2

    0.125 0.125
    GTAW GTAW

    UNLESS OTHERWISE SPECIFIED:


    DIMENSIONS IN INCHES

    TOLERANCES:
    .XX .01 .XXX .005
    FRACTIONS 1/64
    ANGULAR MACHINED .5
    ANGULAR BEND 1
    125 TITLE:
    SURFACE FINISH
    BREAK ALL EDGES .030 AIR FILTER CASE (BOTTOM) SUBASSEMBLY
    SIZE: DATE: DRAWN BY:

    DO NOT SCALE
    B 11/19/2015 CHLOE LIM CHL28
    MATERIAL: PART #: REV:
    SHEET 1 OF 1 - SA-160L1C-002 0
    2 X R.500

    DOWN 90 R .38

    6.253 DOWN 90 R .38 3.000

    2.000

    2 X R1.000

    14.000

    17.000 .125 THK

    DEVELOPMENTAL

    UNLESS OTHERWISE SPECIFIED:


    DIMENSIONS IN INCHES

    TOLERANCES:
    .XX .01 .XXX .005
    FRACTIONS 1/64
    ANGULAR MACHINED .5
    ANGULAR BEND 1
    125 TITLE:
    SURFACE FINISH
    BREAK ALL EDGES .030 AIR FILTER HOLDER
    SIZE: DATE: DRAWN BY:

    DO NOT SCALE
    B 11/19/2015 CHLOE LIM CHL28
    MATERIAL: PART #: REV:
    SHEET 1 OF 1 AL 6061 - GAUGE 8 M-160L1C-001 0
    5.250

    2 X R.875

    .312 TYP
    DOWN 90 R .75

    DOWN 90 R .75
    1.000

    2.375
    .750
    .125 THK 8.931

    DEVELOPMENTAL
    UNLESS OTHERWISE SPECIFIED:
    DIMENSIONS IN INCHES

    TOLERANCES:
    .XX .01 .XXX .005
    FRACTIONS 1/64
    ANGULAR MACHINED .5
    ANGULAR BEND 1
    125 TITLE:
    SURFACE FINISH
    BREAK ALL EDGES .030 FAN HOLDER
    SIZE: DATE: DRAWN BY:

    DO NOT SCALE
    A 11/19/2015 CHLOE LIM CHL28
    MATERIAL: PART #: REV:
    SHEET 1 OF 1 AL 6061 - GAUGE 8 M-160L1C-002 0
    REVISIONS
    REV. DESCRIPTION DATE APPROVED

    1 REMOVED EDGE FLANGE 11/23/2015 CHL28

    .313

    1.000
    1.500

    .125 THK
    .625

    1.250

    UNLESS OTHERWISE SPECIFIED:


    DIMENSIONS IN INCHES

    TOLERANCES:
    .XX .01 .XXX .005
    FRACTIONS 1/64
    ANGULAR MACHINED .5
    ANGULAR BEND 1
    125 TITLE:
    SURFACE FINISH
    BREAK ALL EDGES .030 END CAPS
    SIZE: DATE: DRAWN BY:

    DO NOT SCALE
    A 11/19/2015 CHLOE LIM CHL28
    MATERIAL: PART #: REV:
    SHEET 1 OF 1 AL 6061 M-160L1C-003 1
    .250 - 28 UNF - 2A

    .250
    1.500 1.500

    6.000

    UNLESS OTHERWISE SPECIFIED:


    DIMENSIONS IN INCHES

    TOLERANCES:
    MCMASTER CARR .XX .01 .XXX .005
    FRACTIONS 1/64
    PART NUMBER: 6516K13 ANGULAR MACHINED .5
    ANGULAR BEND 1
    125 TITLE:
    SURFACE FINISH
    BREAK ALL EDGES .030 FAN INSERT
    SIZE: DATE: DRAWN BY:

    DO NOT SCALE
    A 11/22/2015 CHLOE LIM CHL28
    MATERIAL: PART #: REV:
    SHEET 1 OF 1 ZINC PLATED STEEL P-160L1C-005 0
    .121

    .625

    A
    SECTION A-A

    .482

    1.125

    UNLESS OTHERWISE SPECIFIED:


    DIMENSIONS IN INCHES

    TOLERANCES:
    MCMASTER CARR .XX .01 .XXX .005
    PART NUMBER: 92001A329 FRACTIONS 1/64
    ANGULAR MACHINED .5
    ANGULAR BEND 1
    125 TITLE:
    SURFACE FINISH
    BREAK ALL EDGES .030 WING NUT
    SIZE: DATE: DRAWN BY:

    DO NOT SCALE
    A 11/22/2015 CHLOE LIM CHL28
    MATERIAL: PART #: REV:
    SHEET 1 OF 1 18-8 STAINLESS STEEL P-160L1C-006 0
    ITEM NO. PART NUMBER DESCRIPTION QTY.
    1 M-160L1C-007 Water Holder 1
    2 M-160L1C-006 Water Holder End Tab 2
    3 M-160L1C-008 Water Holder End Cap 2

    GTAW TYP GTAW TYP


    1/16 1/16 .594

    GTAW TYP
    1/16 UNLESS OTHERWISE SPECIFIED:
    DIMENSIONS IN INCHES

    TOLERANCES:
    .XX .01 .XXX .005
    FRACTIONS 1/64
    ANGULAR MACHINED .5
    ANGULAR BEND 1
    DETAIL 125 TITLE:
    SCALE 1 : 1 SURFACE FINISH
    BREAK ALL EDGES .030 WATER HOLDER ASSEM
    SIZE: DATE: DRAWN BY:

    DO NOT SCALE
    A 11/22/2015 DGP - LAB1C
    MATERIAL: PART #: REV:
    SHEET 1 OF 1 -- SA-160L1C-003 0
    REVISIONS
    REV. DESCRIPTION DATE APPROVED

    1 Removed Curve 11/23/2015 DGP

    DOWN 90 R .08

    4.241
    DOWN 90 R .08

    16.784

    .079

    1.500

    1.500

    UNLESS OTHERWISE SPECIFIED:


    DIMENSIONS IN INCHES

    TOLERANCES:
    .XX .01 .XXX .005
    FRACTIONS 1/64
    ANGULAR MACHINED .5
    ANGULAR BEND 1
    125 TITLE:
    SURFACE FINISH
    BREAK ALL EDGES .030 WATER HOLDER
    SIZE: DATE: DRAWN BY:

    DO NOT SCALE
    A 11/18/2015 DGP - LAB 1C
    MATERIAL: PART #: REV:
    SHEET 1 OF 1 AL 6061 - GAUGE 14 M-160L1C-004 1
    REVISIONS
    1 Removed Curves, Changed Part Number 11/23/15 DGP

    1.500

    1.500 2 X R.157 .100

    UNLESS OTHERWISE SPECIFIED:


    DIMENSIONS IN INCHES

    TOLERANCES:
    .XX .01 .XXX .005
    FRACTIONS 1/64
    ANGULAR MACHINED .5
    ANGULAR BEND 1
    125 TITLE:
    SURFACE FINISH
    BREAK ALL EDGES .030 WATER HOLDER END CAP
    SIZE: DATE: DRAWN BY:

    DO NOT SCALE
    A 11/23/2015 DGP - LAB1C
    MATERIAL: PART #: REV:
    SHEET 1 OF 1 AL 6061 M-160L1C-008 1
    .313

    1.156

    R.156 ALL
    .188

    UNLESS OTHERWISE SPECIFIED:


    DIMENSIONS IN INCHES

    TOLERANCES:
    .XX .01 .XXX .005
    FRACTIONS 1/64
    ANGULAR MACHINED .5
    ANGULAR BEND 1
    125 TITLE:
    SURFACE FINISH
    BREAK ALL EDGES .030 WATER HOLDER END TAB
    SIZE: DATE: DRAWN BY:

    DO NOT SCALE
    A 11/22/2015 LAB 1C - DGP34
    MATERIAL: PART #: REV:
    SHEET 1 OF 1 AL 6061 M-160L1C-006 0
    2X .125

    .250

    1.500 1.500

    18.000

    UNLESS OTHERWISE SPECIFIED:


    DIMENSIONS IN INCHES

    TOLERANCES:
    .XX .01 .XXX .005
    FRACTIONS 1/64
    ANGULAR MACHINED .5
    ANGULAR BEND 1
    125 TITLE:
    SURFACE FINISH
    BREAK ALL EDGES .030 MACHINED ROD
    SIZE: DATE: DRAWN BY:

    DO NOT SCALE
    A 11/19/2015 CHLOE LIM
    MATERIAL: PART #: REV:
    SHEET 1 OF 1 AL 6061 M-160L1C-004 0
    .437

    2 X R.150
    DOWN 90 R .09
    DOWN 90 R .09

    .400

    15.300
    .425

    2X .141 THRU

    .300
    .150

    A
    .344 UNLESS OTHERWISE SPECIFIED:
    DIMENSIONS IN INCHES

    .937 TOLERANCES:
    .063 THK .XX .01 .XXX .005
    FRACTIONS 1/64
    ANGULAR MACHINED .5
    DETAIL A ANGULAR BEND 1
    SCALE 3 : 2 125 TITLE:
    SURFACE FINISH
    BREAK ALL EDGES .030 TOP CLAMP
    DEVELOPMENTAL SIZE: DATE: DRAWN BY:

    DO NOT SCALE
    B 11/19/2015 CHLOE LIM CHL28
    MATERIAL: PART #: REV:
    SHEET 1 OF 1 AL 6061 - GAUGE 14 M-160L1C-005 0
    .112 - 40 UNC - 2A

    .250

    .112 .125

    .125 .428

    .719

    UNLESS OTHERWISE SPECIFIED:


    DIMENSIONS IN INCHES

    TOLERANCES:
    .XX .01 .XXX .005
    FRACTIONS 1/64
    MCMASTER CARR ANGULAR MACHINED .5
    PART NUMBER: 95446A632 ANGULAR BEND 1
    125 TITLE:
    SURFACE FINISH
    BREAK ALL EDGES .030 CLAMP SHOULDER SCREW
    SIZE: DATE: DRAWN BY:

    DO NOT SCALE
    A 11/20/2015 STEFAN ROESELER
    MATERIAL: PART #: REV:
    SHEET 1 OF 1 BRASS P-160L1C-001 0
    .112 - 40 UNC - 2B

    .188 .063

    UNLESS OTHERWISE SPECIFIED:


    MCMASTER CARR DIMENSIONS IN INCHES
    PART NUMBER: 95130A110 TOLERANCES:
    .XX .01 .XXX .005
    FRACTIONS 1/64
    ANGULAR MACHINED .5
    ANGULAR BEND 1
    125 TITLE:
    SURFACE FINISH
    BREAK ALL EDGES .030 NARROW HEX NUT
    SIZE: DATE: DRAWN BY:

    DO NOT SCALE
    A 11/20/2015 CHLOE LIM
    MATERIAL: PART #: REV:
    SHEET 1 OF 1 BRASS P-160L1C-002 0
    .265

    .078 THRU

    .125

    .070 .602

    .820

    UNLESS OTHERWISE SPECIFIED:


    DIMENSIONS IN INCHES

    MCMASTER CARR TOLERANCES:


    .XX .01 .XXX .005
    PART NUMBER: 92390A075 FRACTIONS 1/64
    ANGULAR MACHINED .5
    ANGULAR BEND 1
    125 TITLE:
    SURFACE FINISH
    BREAK ALL EDGES .030 CLEVIS PIN
    SIZE: DATE: DRAWN BY:

    DO NOT SCALE
    A 11/20/2015 CHLOE LIM
    MATERIAL: PART #: REV:
    SHEET 1 OF 1 ANSI 304 P-160L1C-003 0
    R.063

    .219

    .047

    .548

    MCMASTER CARR UNLESS OTHERWISE SPECIFIED:


    DIMENSIONS IN INCHES
    PART NUMBER: 98335A027
    TOLERANCES:
    .XX .01 .XXX .005
    FRACTIONS 1/64
    ANGULAR MACHINED .5
    ANGULAR BEND 1
    125 TITLE:
    SURFACE FINISH
    BREAK ALL EDGES .030 REUSABLE COTTER PIN
    SIZE: DATE: DRAWN BY:

    DO NOT SCALE
    A 11/20/2015 CHLOE LIM
    MATERIAL: PART #: REV:
    SHEET 1 OF 1 ZINC PLATED STEEL P-160L1C-004 0

    You might also like