Scribd
Upload
106 views1 page

Description: Polypropylene 3270

This technical data sheet provides information on Polypropylene 3270, a homopolymer grade of polypropylene produced in the United States for use in oriented film extrusion. Key characteristics of 3270 include extremely low residuals for improved stiffness and barrier properties in packaging films and tapes. It processes on standard extrusion equipment at melt temperatures of 450-525°F and provides oriented films with high clarity, gloss, and tensile strength along with very low moisture vapor transmission rates. 3270 complies with FDA regulations for food contact.

Uploaded by

ChivuAlexandru
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
106 views1 page

Description: Polypropylene 3270

This technical data sheet provides information on Polypropylene 3270, a homopolymer grade of polypropylene produced in the United States for use in oriented film extrusion. Key characteristics of 3270 include extremely low residuals for improved stiffness and barrier properties in packaging films and tapes. It processes on standard extrusion equipment at melt temperatures of 450-525°F and provides oriented films with high clarity, gloss, and tensile strength along with very low moisture vapor transmission rates. 3270 complies with FDA regulations for food contact.

Uploaded by

ChivuAlexandru
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 1

Polypropylene 3270

Technical Data Sheet


Homopolymer High Crystallinity, Low Melt Flow Film Grade
Produced in the United States

Description
Polypropylene 3270 utilizes proprietary process technology to provide extremely low residuals for exceptional stiffness
and barrier properties.
FDA: 3270 complies with applicable FDA regulations for use in food contact applications. FDA statement available
upon request.
Applications: 3270 is recommended in orientation processes for manufacture of packaging tapes and films that benefit
from improved stiffness and barrier properties.
Processing: 3270 processes on oriented film extrusion equipment with typical melt temperatures of 450F-525F
(232oC-274oC).

Polypropylene
Characteristics

Method Unit Typical Value

Rheological Properties
Melt Flow D-1238 g/10 min 2.0
(1)(3)
Film Properties, Oriented
Haze D-1003 % 1.0
Gloss, 45o D-2457 % 85
Ultimate Tensile D-882 psi MD (psi TD) 28,000 (39,000)
Elongation D-882 % MD (TD) 150 (60)
Tensile Modulus D-882 Psi MD (psi TD) 420,000 (700,000)
g/100 in2/24 hrs/mil
WVTR F-1249-90 0.2
@ 100F, 90% RH
Thermal Properties(1)
Melting Point DSC(2) F (C) 329 (165)
Other Physical Properties
Density D-1505 g/cc 0.91

(1) Data developed under laboratory conditions and are not to be used as specification, maxima or minima.
(2) MP determined with a Differential Scanning Calorimeter. Test procedure available upon request.
(3) Tenter-frame oriented film.

3270 2/2014

TOTAL PETROCHEMICALS & REFINING USA,


INC. TECHNICAL CENTER
POLYMERS AMERICAS P.O. Box 1200
www.totalrefiningchemicals.com Deer Park, Texas 77536
1201 Louisiana Street Phone: 281-884-7500
1-800-344-3462
Suite 1800
Houston, TX 77002

All tests were run under laboratory conditions. ASTM (where applicable) testing procedures. The data are intended as a general guide only and do not necessarily represent results that may be obtained elsewhere. The use of TOTAL
products must be guided by the users own methods for selection of proper formulation. TOTAL PETROCHEMICALS & REFINING USA, INC. disclaims any responsibility for misuse or misapplication of its products. TOTAL MAKES NO
WARRANTY OF MERCHANTABILITY AND THERE IS NO WARRANTY THAT GOODS SUPPLIED SHALL BE FIT FOR ANY PARTICULAR PURPOSE. TOTALS liability and customers exclusive remedy for any claims arising out of sales
of its products are expressly limited at customer option to replacement of non-performing goods or payment not to exceed the purchase price plus transportation charges thereon in respect to any material which damage is claimed.

You might also like