Harn - Cab Pwr Feed P92-4037 A 01

A DIVISION OF

16 15 14 13 12 11 10 9 8 7 6 5 4 3 2 1

L L

P92-4037-AXXXX

TABLE A ( OPTIONS )

OMIT COMPONENT LOCATION ( LENGTH OF CAB FEED ) 5

K VAR OMIT CIRCUITS
COMPONENTS VARIATION VARIATION
USAGE K
BLK1200-2, BLK1200-3, W/O ABS
0 J06, J07, C04, NONE
RED3911-1, BLK1200-1, J05 = D6009-1117 W/O 86" SLEEPER
S01 GENERAL NOTES:
RED3911-0
W/ ABS 1) USE WITH T660, T800, W900 OR C500 AND 2010 ENGINES.
BLK1200-2, BLK1200-3,
1 J06, C04, S01 J05 = D6009-1117 J07 ( ZONE G-11 ) W/O 86" SLEEPER
RED3911-1, BLK1200-1,
2) HARNESS SHALL CONFORM TO R026-170-18.
BLK1200-2, BLK1200-3, W/O ABS
2 J07, S01 J05 = K333-174-4 J06 ( ZONE G-7 )
RED3911-1, RED3911-0 W/ 86" SLEEPER 3) HARNESS SHALL CONFORM TO R026-170-146.
- ALL CONDUCTORS TO BE SGX EXCEPT IF NOTED
J J06 ( ZONE I-7 ) W/ ABS
OTHERWISE IN THE WIRE INFORMATION TABLE.
J
3 BLK1200-1, RED3911-0 NONE J05 = D6009-1117 W/ 86" SLEEPER
J07 ( ZONE I-10 ) - HARNESS COVERING PER 9.0C.

4 SEE TABLE "A" FOR COMPONENT REQUIREMENTS.

5 MINIMUM LENGTH IS 200MM,

INCREMENTAL LENGTHS TO BE 200MM.

HARNESS WEIGHTS: P92-4037-00200 = E 0.80 KG

I TERMINAL INFORMATION FOR: J07 7 C04 TERMINAL INFORMATION FOR: J06
P92-4037-10200 = E 0.82 KG I
P92-4037-20200 = E 0.83 KG
K333-536-3, BLACK K333-46-25, 3 / 8" TERMINAL TYPE B P92-4037-30200 = E 0.85 KG
LABEL: J07, ABS PWR LABEL: J06, PWR JUNCTION STUD
TERMINAL INFORMATION FOR: J04 TERM CIRCUIT NO. TERM CIRCUIT NO. ADD 0.09 KG PER INCREMENT OF XXXX.
J07
K333-46-38, 5 / 16" TERMINAL TYPE B 1 RED3911-0
LABEL: J04, MAIN FUSE 6 TERMINAL TO BE SEALED WITH RED HEAT SHRINK
1 RED3911-1 1 BLK1200-1 TUBING WHICH SHALL COMPLY WITH MIL-1-23053 / 4
TERM CIRCUIT NO. CLASS 3. HEAT SHRINK WILL COVER CRIMP BARREL
1 BLK1200-3
1 BLK1200-0 SEE TABLE A FOR COMPONENT AND 25MM MIN OF WIRE INSULATION. FILL BETWEEN
J06 6 DOUBLED OR TRIPLED OUT WIRES WITH ADHESIVE
VARIATION AND LOCATION
800 SEE TABLE A FOR COMPONENT TO SEAL CRIMP.
H VARIATION AND LOCATION
H
7 CONNECTOR, COVER, FUSES AND LABELS TO BE
F01 ASSEMBLED BY HARNESS MANUFACTURER.
7 C04
250 8 TORQUE FASTENERS TO 13316 IN-LBS.

9) LABEL ALL BREAKOUTS WITH PAPER TAGS OR PRINTED

1000 HEATSHRINK.ALL TEXT TO BE CLEARLY VISIBLE AND
LEGIBLE UPON COMPLETION OF THE HARNESS. PAPER
TAGS SHALL BE APPLIED TO THE HARNESS WITHIN 75MM
OF THE BASE OF EACH CONNECTOR.LABEL ALL BREAKOUTS
200 WITH THE CORRESPONDING "LABEL" STATEMENT.
G G
J06 6 10) WIRES SHOWN AS DASH LINES IN WIRING HARNESS
TAG HERE J07
DIAGRAM ARE SUBJECT TO OMISSION PER TABLE A.
250
11) PART MARKING AND TRACEABILITY REQUIREMENTS
SHALL COMPLY WITH CPS0098. ALSO APPLY
KENWORTH TRADEMARK AS DESCRIBED IN R026-198-120.

12) SIMILAR TO: P92-2971.

K344-813
C01 7
C05
F JO4 6 7 F
7 8

J05 TERMINAL INFORMATION FOR: J05

7 C02
4 SEE_TABLE_A
LABEL: J05, CAB PD BOX
XXXX TERM CIRCUIT NO.
5 1 BLK1200-1
1 BLK1200-2
1 BLK1200-0
E WIRE INFORMATION FOR HARNESS: P92-4037-00000 E
1 RED3911-0
CIRCUIT FROM TO WIRE WIRE WIRE
TERM TERM DESCRIPTION
NUMBER COMPONENT COMPONENT SIZE GAUGE TYPE
BLK1200-0 J04 K333-46-38 1 J05 SEE_TABLE_A 1 40.0mm^2 (1) SGX BATTERY ( + )
BLK1200-1 J05 SEE_TABLE_A 1 J06 K333-46-25 1 32.0mm^2 (2) SGX 86" PWR
BLK1200-2 J05 SEE_TABLE_A 1 S01 SPLICE 1 32.0mm^2 (2) SGX ABS / 86" PWR
BLK1200-3 S01 SPLICE 1 J06 K333-46-25 1 32.0mm^2 (2) SGX 86" PWR
RED3911-0 J07 K333-536-3 1 J05 SEE_TABLE_A 1 13.0mm^2 (6) SGX ABS POWER
D RED3911-1 S01 SPLICE 1 J07 K333-536-3 1 13.0mm^2 (6) SGX ABS POWER D
AR - VINYL TAPE ADHESIVE BACKED
J07 ABS PWR
AR - K344-813 CONVOLUTED TUBING
RED3911-0 13.0mm^2
1 C05 K169-154-8 NUT - HEX METRIC SST
RED3911-1 13.0mm^2
1 J07 K333-536-3 BLACK, DEUTSCH, 1 - WAY, SEALED, DT SERIES

1 J06 K333-46-25 3 / 8" RING TERMINAL

C 4
C
S01 1 J05 SEE_TABLE_A RED DYNACRAFT BATTERY TERMINAL
BLK1200-3 32.0mm^2
1 J04 K333-46-38 5 / 16" RING TERMINAL
BLK1200-1 32.0mm^2
1 F01 P27-6087-150150 2-FUSE POWER DISRIBUTION CENTER
J06 PWR JUNCTION STUD
C04 1 C04 D6003-1688 RED VTE 405N9V02 RING TERMINAL BOOT
F01
1 C02 D2953-6924 RED DYNACRAFT CAP
MAIN FUSE J04 1 C01 D6011-2101 RED DYNACRAFT TERMINAL COVER
B B
J05 C01 CAB PD BOX
BLK1200-2 32.0mm^2

BLK1200-0 40.0mm^2

C02

A A
DWG
SIZE
A0
16 15 14 13 12 11 10 9 8 7 6 5 4 3 2 1