Rapid Sheet Metal

Overview ............................................................................................................ 3
Capabilities ......................................................................................................... 4
Certifications & Registrations .............................................................................. 4
Stock Materials ................................................................................................... 5
Design Guidelines
Uniform Wall Thickness....................................................................................... 6
Bends ................................................................................................................. 7
Hems .................................................................................................................. 8
Offsets ................................................................................................................ 9
Holes & Slots ...................................................................................................... 10
Counter Sinks ..................................................................................................... 11
Notches & Tabs .................................................................................................. 12
Bend Relief ......................................................................................................... 13
Welding ............................................................................................................... 14
PEM Hardware .................................................................................................... 15
Design Tools
Standard Tooling ................................................................................................ 17
Finishing
Plating ................................................................................................................ 18
Powder Coating & Silk Screening ......................................................................... 19
Resources .......................................................................................................................... 20
 Rapid Sheet Metal

Rapid Sheet Metal began in 2001 with the mission: Prototypes First
and it is still the foundation of our business. The shop is structured
similar to an additive manufacturing facility. This approach uses 3D CAD
data to streamline the quoting and manufacturing processes which
eliminates long que times. Currently, Rapid Sheet Metal has two facilities
totaling 75,000 square feet of space servicing prototype and low
volume production quantities.
Sheet Metal Fabrication is the creation of parts through forming,
bending, punching and cutting sheets of metal. This guide will cover
sheet metal best practices and tips to ensure your sheet metal parts are
optimally designed for durability, manufacturability, and end-use
applications.
 Rapid Sheet Metal

Part Size: Max 8 length

In-House Capabilities:

Laser Cutting Rolling Silk Screening

Punching Riveting Part Marking
Shearing Basic Tool Making
Forming & Bending Tumbling
TIG, MIG & Spot Secondary Machining
Welding Assembly
PEM Hardware Plating
Hardware Insertion Powder Coating

Certifications & Registrations:

ITAR Registered
ISO 9001:2008
Aerospace Welding
RoHS Compliant
Joint Certificate Program
Central Contractor Registered
SOLIDWORKS Certified Solution Partner
 Rapid Sheet Metal

CRS Galvanneal Galvanized 304 316 5052 6061-T6 C101 C110 CDA260
26 0.018
24 0.024 0.024 0.024 0.024 0.024 0.020 0.020 0.020 0.020
22 0.030 0.029 0.029 0.025 0.025 0.025 0.025 0.025
20 0.036 0.036 0.036 0.036 0.036 0.030 0.030 0.032 0.032
19 0.042 0.040 0.040 0.040
18 0.048 0.048 0.048 0.047 0.047 0.040 0.040 0.050 0.050 0.050
16 0.060 0.060 0.060 0.059 0.059 0.050 0.050 0.062 0.062 0.062
14 0.075 0.075 0.075 0.074 0.074 0.062 0.062 0.080 0.080 0.080
13 0.090 0.089 0.089 0.089 0.089 0.090 0.090 0.090
12 0.104 0.104 0.104 0.104 0.104 0.080 0.080
11 0.119 0.119 0.119 0.119 0.119 0.090 0.090 0.125 0.125 0.125
10 0.134 0.134 0.134 0.134 0.100 0.100
8 0.164 0.125 0.125
7 0.179 0.179
6 0.160 0.160
0.250 0.250 0.250 0.250
 Design Guidelines

Because Sheet Metal parts are manufactured from a single sheet of

metal the part must maintain a uniform wall thickness. Rapid Sheet
Metal is capable of manufacturing sheet metal parts with a minimum of
0.010 to 0.25 in thickness.
 Design Guidelines

Bends in sheet metal are manufactured using sheet metal brakes. RAPID
will hold a +/- 1 degree tolerance on all bend angles. RAPIDs preferred
bend radius is 0.030. Other standard bend radii available, some of which
will add additional cost to your part, include:
0.060
0.090
0.120
0.188
0.250
0.375
0.500
0.750
1.000

NOTE: RAPID recommends

keeping the same bend ra-
dii across all bends when
possible. This helps mini-
mize the amount of brake
setups and keeps cost
down.
 Design Guidelines

Hems are folds at the end of a part to create a rounded edge. RAPID can
form both open and closed hems as required. The tolerance of a hem is
dependent upon the hems radius, material thickness and features near
the hem. It is recommended the minimum inside diameter equals the
material thickness and the hem return length is 4 times the thickness.
 Design Guidelines

An offset is used to create a Z shaped profile in a sheet metal part.

RAPIDs offset height tolerance is +/- 0.012 top of sheet / top of form.
RAPIDs preferred offset is 0.030. Other standard offsets, which can add
costs to your part, include:
0.060
0.093
0.125
0.187
0.213
0.250
0.281
0.312
 Design Guidelines

Holes and slots should be a minimum of material thickness in diameter. If

a material is 0.036 or thinner the hole should be 0.062 from the
material edge. If the material is thicker than 0.036 then the hole should
be at least 0.125 from the material edge to avoid distortion. If hardware
inserts are required the spacing should be according to manufacturers
specifications.

Hole Tolerances:
Hole Diameter +/- 0.005 Unless otherwise specified
Hardware Hole Diameter +0.003/-0.000 Per manufacturers specifications
Counterbore & Spotfacing 0.063 to 0.250 +0.010/-0.005
Counterbore & Spotfacing 0.251 to 0.500 +0.015/-0.005
Counterbore & Spotfacing >0.500 +0.020/-0.005
Machined Diameter +/-0.001

NOTE: If using eRAPID, all holes and cut-

outs need to be a minimum of 4x the ma-
terial thickness away from the material
edge to avoid additional costs in esti-
mating.
 Design Guidelines

Rapid Sheet Metal offers both machined and formed countersinks.

Machined counter sinks are created with a drill press while formed
counter sinks are created with punch press tooling.

Counter Sink Tolerances:

Machined Counter Sink Major Diameter +/-0.010
Machined Counter Sink Minor Diameter +/-0.010 2/3 thickness
Formed Counter Sink Major Diameter +/-0.015
Formed Counter Sink Minor Diameter +/-0.015
 Design Guidelines

Notches must be at least the materials thickness or 0.04, whichever is

greater, and can be no longer than 5 times its width. Tabs must be at
least 2 times the materials thickness or 0.126, whichever is greater, and
can be no longer than 5 times its width.
 Design Guidelines

Bend reliefs are implemented where a bend extends on an edge. The

relief notch is added to prevent tearing. Bend reliefs will be no deeper
than the material thickness plus the bend radius and no wider than
0.030.
 Design Guidelines

When designing a part requiring welding, it is best to not specify the

exact method or type of welding unless required for function. This
provides the manufacturer increased flexibility when fabricating the
sheet metal part which often results in the most economical and fastest
lead-time choice for the customer.
The three most common types of welding include Resistance Spot
Welding (RSW), Gas Metal Arc Welding (MIG), and Gas Tungsten Arc
Welding (TIG).
 Design Guidelines

When designing sheet metal parts with PEM Hardware it is important to

make sure the hardware is not too close to a bend, edge or other
fastener. When designing near a bend or edge, use the Centerline-to-
Edge (C/L to Edge) value to find the minimum distance to the outside
edge. When calculating the spacing between multiple pieces of
hardware, use the C/L to Edge formula plus the diameter of the second
mounting hole.
Hardware Plating Specifics
Before means hardware is required to be inserted before plating.
After means hardware is required to be installed after plating.

Iridite,
Nickel Black Tin
Material Hardware Chromate, Zinc Anodize Passivate
Plate Oxide Plate
Alodine
AC, CLS, CLSS,
Aluminum Before After After
FHS, SOS, BSOS
Aluminum CLA & FHA Before After Before After
Stainless SP, FH4, SO4,
Before Before Before Before
Steel BSO4
AS, BSO, FH, S,
CRS Before Before Before
SO, SS
AS, BSO, FH, S,
Galvanneal PAINT / POWDER ONLY
SO, SS
AS, BSO, FH, S,
Galvanized PAINT / POWDER ONLY
SO, SS

Hardware Lengths

Hardware Type 0.25 0.312 0.375 0.5 0.625 0.75 0.875 1 1.25 1.5

FH, FHS, FH4, FHL, 4 5 6 8 10 12 14 16 20 24

FHLS, TFH, TFHS,
HFH, HFHS All metric lengths are in millimeters (ex. Dash 10 is 10MM long)
 Design Guidelines

Material Thickness vs. Shank Numbers

Hardware Type Thread Code Min Sheet Thickness Shank

0.03 0
AC, CLS, CLSS, F, FHS, SOS, 0.04 1
S, SS, CLS, SP, CLA BSOS, CLA
0.056 2

632, 832, 024, 032 0.091 3

0.056 1
0420, 0428, 0518
S, SS, CLS, SP, CLA 0.091 2

M6, M8 0.0125 3

256, 440, 632, 832, 032 0.060 0.090 1

F
M2.5, M3, M4, M5 0.090 UP 2

SO, SOS, SO4, BSO, BSOS, 440, 6440, 632 0.040 IF LESS THAN 0.40 USE TSO TO TSIS (0.025
BSO4 M3, M4 MINIMUM)
SO, SOS, SO4, BSO, BSOS,
8362, 832, 032 0.050
BSO4
256, 440, 632, 832, 024, 0.040
032, M2.5, M3, M4, M5 0.062
FH, FHS, FH4, FHA
.0420.
0.93
.0518.
440, 632, 832, 0.032. M3,
FEO (Locking), FEOX 0.039 - 0.045
M4, M5
AFTER PLATING
440, 632, 832, 0.032. M3,
FE (Locking), FEX 0.059 - 0.070
M4, M5

Special Cases

Hardware Type Special Info Install In Stainless

PL, PLC Nylon Threads NO
TD, RAS, RSS Steel Only NO
All Panel Fasteners: PF11, PF12, PFC2 Installed Post Finishing
NO
(This includes powder coat)
LK, LKS, LKA Treated w/ Black Dry Lubricant NO
 Design Tools

By using standard tooling features you can be assured we have the

in-house punch tooling to create the geometry you are modeling. This
eliminates the phone calls and e-mails back and forth to match your
needs with our in-house tooling, and avoids the time and expense of
ordering custom tooling. SOLIDWORKS and PTC Creo users can
download a model of their specific tooled feature and immediately
integrate it into their design.

Embossments
Card Guides NOTE: In addition to
native file formats, STEP
Louvers files are also available
in either SOLIDWORKS
Lances or PTC Creo.

Forming Tools
 Finishing

Plating Type Description Class

Class I Non Dyed

Sulphuric Acid Electrolyte Natural or Clear
MIL-A-8625 Type II
Standard Class II Dyed
Specify Color: Black, Blue, Red, etc.
Class I Non Dyed
Hard Coat Natural or Clear
MIL-A-8625 Type III
Specialty Class II Dyed
Specify Color: Black, Blue, Red, etc.

Class IA Maximum Protection, Thick

Contains Hex Chrome
Coating
MIL-DTL-5541 Type I Non RoHS Yellow Unless
Class II Corrosion Protection, Thin
Specified
Coating
Class IA Maximum Protection, Thick
Contains Non-Hex Chrome Coating
MIL-DTL-5541 Type II
RoHS Clear Only Class II Corrosion Protection, Thin
Coating

SC1- Durability Mild

SC2 Durability Moderate
ASTM-B-633 Type I Non Chromate Conversion
SC3 Durability Severe
SC4 Durability Very Severe
Colored Chromate Conver- SC1- Durability Mild
sion SC2 Durability Moderate
ASTM-B-633 Type II
Black or Yellow, Yellow is SC3 Durability Severe
RoHS Compliant SC4 Durability Very Severe
Colorless Chromate Con- SC1- Durability Mild
version SC2 Durability Moderate
ASTM-B-633 Type III
Please Specify RoHS Com- SC3 Durability Severe
pliancy SC4 Durability Very Severe

MIL-T-10727 Type I Electrodeposited

MIL-T-10727 Type II Hot-dipped

Class I Iron & Steel

Class II 400 Series Stainless Steel
MIL-C-13924
Class III Fused Salt Process
Class Iv Stainless Steel MIL-f-495
 Finishing

RAPID offers in-house powder coating and silk screening to ensure fast
deliveries. RAPID facilities are ITAR registered and we powder coat or
silk screen your parts in compliance with government regulations. In
addition, we can order any other powder you need but it will extend
lead-times. Silk screen colors can be matched to any Pantone number
you provide and all inks are in stock.
 Resources

eRAPID:
eRAPID is a FREE instant sheet metal part quoting, ordering and design for
manufacturing feedback plugin for SOLIDWORKS.
To download the plugin go to www.erapid.com

myRAPID:
myRAPID is the RAPID customer portal. It allows you to quote multiple files at
once (instantly quoting sheet metal parts), see past quotes, update contact and
shipping information, and order multiple parts.
Visit: rapidmanufacturing.com/myrapid

RapidQuote:
Upload 3D CAD files and our team of engineers will process your request and
send a quote out within 24 hours.
Visit: quote.rapidmanufacturing.com/

Powder Coat Library:

To see a list of powders we keep in stock.
Visit: rapidmanufacturing.com/powdercoat

CAD Tooling Library:

To download the CAD Tooling Library.
Visit: rapidmanufacturing.com/3d

Sheet Metal Design for Manufacturing LinkedIn Group:

This group is designed for engineers who design sheet metal parts. It provides
them with an on-line forum to collaborate and discuss techniques to better
design sheet metal parts for manufacturability.
Join: https://www.linkedin.com/groups/8531417