2 Storey 6cl
2 Storey 6cl
2 Storey 6cl
CONTENTS
DISTRICT/CITY/MUNICIPALITY
ARCHITECTURAL
STRUCTURAL
SANITARY
ELECTRICAL
ELECTRICAL
E-3 GROUND FLOOR LIGHTING LAYOUT
SECOND FLOOR LIGHTING LAYOUT
SANITARY
REPUBLIC OF THE PHILIPPINES DESIGNER: CHECKED BY : RECOMMENDING APPROVAL : RECOMMENDING APPROVAL : APPROVED BY : PROJECT TITLE : PROJECT NO: OWNER : SHEET NO:
DESIGNED BY: NQM
DEPARTMENT OF EDUCATION
S
IE
INEERING D
PDO III, PFSED-DepED ARCHITECT III, PFSED-DepED HEAD, PLANNING AND DESIGN UNIT CHIEF, PFSED-OPS UNDERSECRETARY
AL
IC
SI
I
YS
NOTE:
THIS DRAWING, AS AN INSTRUMENT OF SERVICE IS THE PROPERTY OF PHYSICAL FACILITIES AND SCHOOLS ENGINEERING
DIVISION AND AS SUCH MUST NOT BE REPRODUCED OR COPIED IN PART OR IN WHOLE WITHOUT THEIR PERMISSION,
ALL DRAWINGS ARE TO BE RETURNED WHEN NO LONGER IN USE.
2500
SHEET ROOFING
LINE OF ROOF
DETAIL) (PAINT FINISH)
1
A-3
675
TOP OF ROOF BEAM
GA. 26 PLAIN G.I. SHEET
GUTTER ON 12x300mm
W-1 FIBER CEMENT FASCIA BOARD
3200
LANDING
6725
PAINT FIN.
7000
3200
32mm G.I. PIPE
HANDRAIL WITH 32mm
VERT. SUPPORT
325
NAT. GRD. LN. FINISH)
4
2500
FL1 C O R R I D O R
A-3 SCALE : 1 : 100 METERS
WF3
FD FD FD FD FD FD
2500
FINISH)
(PAINT FINISH)
3200
9000 9000 9000 4500 150mm THK. CHB PLAIN
PLASTER PAINT FIN.
4500 4500 4500 4500 4500 4500 2550 1700
6725
3
PLASTER AND PAINT FIN.
A-3
3200
LN. OF SUNBREAKER
SCHEDULE OF FINISH
WF2 W-3
675
800
850
FLOORS :
HE
SHE GROUND FLR. LVL. @300mm O.C. (PAINT
325
D-4
D-3
D-4 NAT. GRD. LN. FINISH)
1100
FL1 - PLAIN CEMENT FLOOR FINISH
860
D-3
3
WF4 D-2
1500
A-2 SCALE : 1 : 100 METERS FL2 - PLAIN CEMENT FLOOR ROUGH
7000
7000
1 2 3
4776
FL3 - 200X200 VITRIFIED FLR TILES
9500
( UNGLAZED )
WF1
WALLS :
CONCRETE HOLLOW
BLOCKS
WF1 - 150 MM THK. CHB W/ PLAIN
UP CEMENT PLASTER FIN (PAINT)
CONCRETE SLAB
2500
REPUBLIC OF THE PHILIPPINES DESIGNER: CHECKED BY : RECOMMENDING APPROVAL : RECOMMENDING APPROVAL : APPROVED BY : PROJECT TITLE : PROJECT NO: OWNER : SHEET NO:
DESIGNED BY: NQM
DEPARTMENT OF EDUCATION
S
IE
INEERING D
PDO III, PFSED-DepED ARCHITECT III, PFSED-DepED HEAD, PLANNING AND DESIGN UNIT CHIEF, PFSED-OPS UNDERSECRETARY
AL
IC
SI
I
YS
NOTE:
THIS DRAWING, AS AN INSTRUMENT OF SERVICE IS THE PROPERTY OF PHYSICAL FACILITIES AND SCHOOLS ENGINEERING
DIVISION AND AS SUCH MUST NOT BE REPRODUCED OR COPIED IN PART OR IN WHOLE WITHOUT THEIR PERMISSION,
ALL DRAWINGS ARE TO BE RETURNED WHEN NO LONGER IN USE.
2500
TOP OF ROOF BEAM SEE TRUSS DETAIL
538
3200
10200
3200
10
W-1 W-2
4 5 6 W-1 A-5
SECOND FLOOR LEVEL
LANDING
CLASSROOM 3
SECOND FLOOR LEVEL CORRIDOR
6725
EXPOSED CEILING UNDER
SLAB PAINT FIN.
W-3
3200
50mm GA# 40
200x200mm G.I. PIPE
3200
GLAZED WALL HANDRAIL
TILES 9
W-1 W-2
1 2 3 HE SHE A-4
GROUND FLOOR LEVEL
150mm THK. CHB WALL
325
325
FIN. GRD. LN.
3 EXPOSE CEILING
200
HANDRAIL w/32mm
VERT. SUPPORT @300mm
9000 9000 9000
OC (PAINT FIN.)
600
600 4500 4500 4500 4500 4500 4500 4500
900
GA.26 CORR. G.I.
SHEET ROOFING w/32mm VERT. SUPPORT
@300mm O.C.(PAINT FIN.)
(PAINT FINISH) 12mM STEEL DOWEL
2500
700
EMBEDD IN CONC.
NON-SKID PLAIN A-3
GA.26 PLAIN G.I. CEMENT FLOOR FINISH NON-SKID PLAIN CEMENT
SHEET GUTTER ON w/GROOVE LINES FLOOR FIN. w/ GROOVE
200
TOP OF ROOF BEAM
12x300mm FIBER LINES
100
200
CEMENT FASCIA BD.
900
700
1200
(PAINT FINISH)
900
700
3200
300
PLAIN CEMENT
PLASTER PAINT WALL
FINISH
W-1
SECOND FLOOR LEVEL
6 DET. ELEVATION OF RAMP 7 DETAIL SECTION
6725
CONCRETE SUN
BREAKER A-3 SCALE 1:50 M A-3 SCALE 1:10 M
W-3
100X100 CONCRETE
SKIRTING
100
STEEL DOWELS (PAINT FIN.)
150
A-3 SCALE : 1 : 100 METERS
9000 9000 9000
2500
GA.26 CORR G.I. SHEET C O R R I D O R
ROOFING (PAINT FIN.)
8 SPOT DETAIL
2500
1200
A-3 SCALE 1:5 M
175
FASCIA BOARD (PAINT
FIN.)
3200
1400
1400
100mm THK. CHB RAILING RAMP UP
3600
NON-SKID PLAIN
3200
5150
D-1 D-1 1-D D-1 D-1 D-1 32mm G.I. PIPE CEMENT FLOOR
HANDRAIL w/32mm FINISH w/GROOVE TOTAL RUN OF RAMP 32mm G.I. PIPE
LINES
VERT. SUPPORT @150mm 7 HANDRAIL w/32mm
1-D
W-2 W-2 2-W 2-W W-2 W-2 O.C. (PAINT FIN.) A-3 VERT. SUPPORT @300mm
GROUND FLOOR LEVEL
O.C. (PAINT FIN.)
325
REPUBLIC OF THE PHILIPPINES DESIGNER: CHECKED BY : RECOMMENDING APPROVAL : RECOMMENDING APPROVAL : APPROVED BY : PROJECT TITLE : PROJECT NO: OWNER : SHEET NO:
DESIGNED BY: NQM
DEPARTMENT OF EDUCATION
S
IE
INEERING D
PDO III, PFSED-DepED ARCHITECT III, PFSED-DepED HEAD, PLANNING AND DESIGN UNIT CHIEF, PFSED-OPS UNDERSECRETARY
AL
IC
SI
I
YS
NOTE:
THIS DRAWING, AS AN INSTRUMENT OF SERVICE IS THE PROPERTY OF PHYSICAL FACILITIES AND SCHOOLS ENGINEERING
DIVISION AND AS SUCH MUST NOT BE REPRODUCED OR COPIED IN PART OR IN WHOLE WITHOUT THEIR PERMISSION,
ALL DRAWINGS ARE TO BE RETURNED WHEN NO LONGER IN USE.
7-BLADES
260
260
300
635
600 GA#26 CORR. G.I.
ROOFING SHT. PAINT FIN.
14-BLADES
14-BLADES
1240
6mm THK. MARINE PLYWOOD
1240
CEILING ON 50x50mm CEILING
JOIST @600mm BW
2400
2400
2400
2400
2100
2100
2054
STAINLESS STEEL
38mm TEKSCREW
1200
1765
KICKING PLATE
800
GA#26 GI STRAP
1500
COPPER RIVET
900
900
12x300mm FIBER CEMENT
300
FASCIA BOARD FIX W/METAL
300
FFL FFL SCREW ON STL. FRAME PAINT
FINISH
CLASSROOM TOILET (DISABLED) TOILET TOILET (CUBICLE)
TANGUILE PANEL DOOR ON 50X150 MM HOLLOW CORE FLUSH TYPE SWING HOLLOW CORE FLUSH TYPE SWING DOOR SWING DOOR ON 50X100 JALOUSIE WINDOWS WITH CLEAR GLASS JALOUSIE WINDOWS WITH CLEAR GLASS BLADES JALOUSIE WINDOWS WITH CLEAR GLASS
GA#26 GI GUTTER PAINT FIN.
D-1 THK. YACAL/GUIJO JAMB W/ FIXED D-2 DOOR W/ MARINE PLYWOOD FACING D-3 W/ MARINE PLYWOOD FACING INSIDE AND D-4 YACAL/GUIJO DOOR JAMB BLADES ON STANDARD ALUMINUM CASING ON STANDARD ALUMINUM CASING AND FIXED BLADES ON STANDARD ALUMINUM CASING
20x20X2mm ANGULAR BAR
AND FIXED CLEAR GLASS TRANSOM ON CLEAR GLASS TRANSOM ON 50X150
CLEAR GLASS TRANSOM COMPLETE INSIDE AND ORDINARY OUTSIDE
ORDINARY OUTSIDE COMPLETE W/ COMPLETE WITH HARDWARES
W-1 W-2 W-3 ON 50X150 YACAL/GUIJO JAMB COMPLETE FOR FASCIA BOARD FRAME
WITH HARDWARES AND ACCESSORIES
COMPLETE W/ HARDWARES AND HARDWARES AND ACCESSORIES ACCESSORIES 50X150 YACAL/GUIJO JAMB COMPLETE WITH YACAL/GUIJO JAMB COMPLETE WITH WITH HARDWARES AND ACCESSORIES
COATED WITH PRIMER
ACCESSORIES PROVIDE KICK PLATE HARDWARES AND ACCESSORIES HARDWARES AND ACCESSORIES
BASKET STRAINER
3
9000 9000 9000 A-4 SCALE : 1:50m
600 4500 4500 4500 4500 4500 4500 4500 600 75mm PVC
DOWNSPOUT PAINT
FINISH
RD RD
8
1000
1000
A-4 SCALE : 1:10 m.
38mm TEKSCREW
PAINT FINISH
6mm THK. MARINE PLYWOOD CEILING
ON 50x50mm CEILING JOIST
@600mm BW
GA. 26 PLAIN G.I. SHT.
RIDGE ROLL PAINT FIN. 6mm THK. ORD. GA#26 GI STRAP
PLYWOOD CEILING W/ ROOF
6mm GROOVE ON
5
BEAM GA#26 G.I. GUTTER ON 12x300mm
A-4 FIBER CEMENT FASCIA BOARD PAINT
50x50mm CEILING
FIN.
JOIST @600mm BW
(PAINT FIN.)
GA.26 PLAIN. G.I.
SHEET FLASHING ON
BASKET STRAINER
12x300mm FIBER
75mm PVC DOWNSPOUT PAINT
2500
LINE OF STRUCTURE
6
1000
A-4 SCALE : 1 : 40 m.
RD RD SHEET GUTTER
PAINT FINISH
LN. OF STRUCTURE SEE TRUSS DET.
4
2
A-4
FR. 25x75mm WOOD
CONCRETE
6 A-4 SCALE : 1 : 100 METERS
FRAMEPAINT FIN.
A-4
300
PLYWD. CEILING
WELS (PAINT FIN.) 600 4500 4500 4500 4500 4500 4500
(PAINT) ON 50x50mm CONC. BEAM
CLG. JST. @600mm
OC BW
1000
1175
25x25mm WOOD VENT
6mm THK. MARINE PROVIDE INSECT SCREEN
FR. QUARTER-C
PLYWD. CEILING
MOULDING CEILING
LIGHTING FIXTURE
CONTACT TO CONC. (PAINT) ON 50x50mm
6mm THK. ORD PLYWOOD CEILING
WALL
CLG. JST. @600mm
OC BW
7
ETAIL w/6mm GROOVE ON 50x50mm
1:5 M
CLEILING JOISTS (PAINT FIN.) 5 A-4 SCALE : 1 : 10 m.
7000
A-4 SCALE : 1 : 10 m.
100
100
6mm THK. MARINE PLYWOOD CEILING
FR.25x75mm CEILING ON 50x50mm 675
VENT FRAME CEILING JOIST @600mm
1000
ON 12x300mm THK.
FIBER CEMENT FASCIA 4 9
BOARD
A-4
A-4 SCALE : 1 : 100 METERS
REPUBLIC OF THE PHILIPPINES DESIGNER: CHECKED BY : RECOMMENDING APPROVAL : RECOMMENDING APPROVAL : APPROVED BY : PROJECT TITLE : PROJECT NO: OWNER : SHEET NO:
DESIGNED BY:
DEPARTMENT OF EDUCATION
S
IE
INEERING D
PDO III, PFSED-DepED ARCHITECT III, PFSED-DepED HEAD, PLANNING AND DESIGN UNIT CHIEF, PFSED-OPS UNDERSECRETARY
AL
IC
SI
I
YS
NOTE:
THIS DRAWING, AS AN INSTRUMENT OF SERVICE IS THE PROPERTY OF PHYSICAL FACILITIES AND SCHOOLS ENGINEERING
DIVISION AND AS SUCH MUST NOT BE REPRODUCED OR COPIED IN PART OR IN WHOLE WITHOUT THEIR PERMISSION,
ALL DRAWINGS ARE TO BE RETURNED WHEN NO LONGER IN USE.
50
EKSCREW SCHEDULE 40
900
STL. FRAME PAINT WELDED TO G.I. PIPE
19mm SQUARE BAR
2500
TYPICAL
W A L L
HANDRAIL @146mm O.C.
9
900
50
m ANGULAR BAR 8
A-5
900
850
IA BOARD FRAME 6
ITH PRIMER
A-5 SECOND F.F.L.
5
TYPICAL
A-5
168
18 17
146
TRAINER ANCHOR @R.C. STAIR
19 16
A-5 SCALE : 1:20 mts
50
LANDING ANCHOR @R.C. STAIR
TREAD
15 50mm G.I. PIPE SCH.
DN
40 w/19mm SQ. BAR
4672mm
14
@146mm ON CENTER 146
VC
25x25x2mm ANGULAR
7000
13 PAINT FIN.
T PAINT
9
BAR NOSING
12 292 7
25
TYPICAL
11
A-5 SCALE : 1:20 mts A-5 SCALE : 1:20 MTS
EACH
0 m. 10
4
25
292mm
2x25x25mm
4672
337
NOSING @STEP
@
12x12x2mm FLAT
TREADS
BAR STRAP
@600mm O.C.
175
16
50 50
6 (PAINT FINISH)
19mm SQ. BAR
(PAINT FIN.)
TREAD
(SECOND FLOOR TO GROUND FLOOR)
100
50
2
FROM
19 mm SQUARE
BAR ANCHOR TO
900mm
FIN.)
7000 2500
8
ROOF LINE 2460 4540
4500
2067
FR. 25x75mm
FRAMEPAINT FIN.
WOOD
10
W-1
11 A-5 SCALE : 1:5 MTS
3200
1100
W-1 A-5
TOILET 4 146
2328
100
A-6
200
100 650 100
2 RISERS @168
850
900
700
SECOND FLOOR LINE CORRIDOR
19 50mm G.I.PIPE SCH. 40
17
C HANDRAIL w/25mm SQ.
337
18
5mm WOOD VENT
DE INSECT SCREEN
18 16
LANDING 17
50mm SCH. 40 G.I. BRACKECT @600mm O.C. C
16 PAINT FIN.
19 15 15
PIPE HANDRAIL w/19mm
SQ. BAR @146mm O.C
14
17 RISERS @168 = 2856
14 38mm STAINLESS
13
4672mm
200
13
7000
W-3 0
1 : 10 m. 5mm THK.
0
11
20
12 PLASTER PAINT FIN. FACIAL MIRROR 700 400 10
3200
700
9
2863
11 8
600
SECOND FLOOR LEVEL
EACH
50
200x200mm VITRIFIED
10 50mm G.I. PIPE SCH.
GLAZED WALL TILES 6
40 w/19mm SQ. BAR
295
300
5
1726
1625
4672
200
9 @146mm ON CENTER 292 4
292mm
168
WC
900
900
WC 2
787
700
7
GROUND FLOOR LINE
1
CORRIDOR SCALE: 1:50m
SHE HCR
@
SCALE: 1:20m
6
16TREADS
325
4
A-5 11
2460 4672
A-5 SCALE: AS SHOWN
292
3
16 TREADS @ 292 = 4672
50
UP
7
3
(GRD FLOOR TO SECOND FLOOR) A-5 A-6 SCALE : 1:50 mts.
1
A-5 SCALE : 1:100 mts
REPUBLIC OF THE PHILIPPINES DESIGNER: CHECKED BY : RECOMMENDING APPROVAL : RECOMMENDING APPROVAL : APPROVED BY : PROJECT TITLE : PROJECT NO: OWNER : SHEET NO:
DESIGNED BY:
DEPARTMENT OF EDUCATION
S
IE
INEERING D
PDO III, PFSED-DepED ARCHITECT III, PFSED-DepED HEAD, PLANNING AND DESIGN UNIT CHIEF, PFSED-OPS UNDERSECRETARY
AL
IC
SI
I
YS
NOTE:
THIS DRAWING, AS AN INSTRUMENT OF SERVICE IS THE PROPERTY OF PHYSICAL FACILITIES AND SCHOOLS ENGINEERING
DIVISION AND AS SUCH MUST NOT BE REPRODUCED OR COPIED IN PART OR IN WHOLE WITHOUT THEIR PERMISSION,
ALL DRAWINGS ARE TO BE RETURNED WHEN NO LONGER IN USE.
1100
650
200x200mm GLAZED
1100
200x200mm VITRIFIED
600
4500
PLAIN CEM. PLASTER
PAINT FIN.
PLAIN CEMENT PLASTER
PAINT WALL FINISH
200
1710
100 1700 200X200 VITRIFIED
CERAMIC WALL
2ND FLR. LVL.
TILES ( GLAZED )
600
W-3 COUNTER SINK
4
300
512
100
800
EAD
6
A-7
3200
W-3
2688
2738
2613
CONC. COUNTER 5 6
1600
SINK
300
A-7 SCALE : 1:20 M
A-7 SCALE : 1:20 m.
800
WC
800
MALE
CLASSROOM LVL. TOILET
50
300
TOILET LVL.
50mm G.I. PIPE URINAL
600
SCHEDULE 40
(PAINT FINISH)
2
A-7 SCALE : 1:40 m.
19 mm SQUARE
BAR ANCHOR TO
3
4
A-7 A-7 SCALE : 1:20 m.
8
A-5 LINE OF DOOR JAMB
850
SHE
1100
D-4
16
D-3 50mm SCH. 40 G.I.
15 PIPE HANDRAIL w/19mm
SQ. BAR @300mm OC.
14
1100
10
13
850
0
20
PLASTER PAINT FIN. 150mm THK CHB WALL
MIRROR
UNDER SLAB 700 400 10 PLASTER PAINT FIN.
3200 9
2856 8
2763
600
7
200x200mm VITRIFIED
D-2
GLAZED WALL TILES 6
2100
2100
5
200
1609 1074
1500
300
1625
292 4
3
342
HCR
920
2
168
PVC PI
1
SHE HCR
GROUND FLOOR LINE
3
A-7 SCALE : 1 : 30 m.
REPUBLIC OF THE PHILIPPINES DESIGNER: CHECKED BY : RECOMMENDING APPROVAL : RECOMMENDING APPROVAL : APPROVED BY : PROJECT TITLE : PROJECT NO: OWNER : SHEET NO:
DESIGNED BY:
DEPARTMENT OF EDUCATION
S
IE
INEERING D
PDO III, PFSED-DepED ARCHITECT III, PFSED-DepED HEAD, PLANNING AND DESIGN UNIT CHIEF, PFSED-OPS UNDERSECRETARY
AL
IC
SI
I
YS
NOTE:
THIS DRAWING, AS AN INSTRUMENT OF SERVICE IS THE PROPERTY OF PHYSICAL FACILITIES AND SCHOOLS ENGINEERING
DIVISION AND AS SUCH MUST NOT BE REPRODUCED OR COPIED IN PART OR IN WHOLE WITHOUT THEIR PERMISSION,
ALL DRAWINGS ARE TO BE RETURNED WHEN NO LONGER IN USE.
TG-2
TG-2
TG-2
TG-2
TG-2
7000
100mm THICK
SLAB ON FILL
WITH 10mm
SPACED AT 400
BOTHWAYS
2500
TG-1
TG-1
TG-1
TG-1
B
S-3
A
S-1 SCALE : 1:100 M.
4500 4500 4500 4500 4500 4500 4500
7
B-1 B-1 B-1 B-1 B-1 B-1 CB-1
7000
G-5
G-5
-
-
G
B-2
S-2
S-1 S-1 S-1 S-1 S-1 S-1
G-4
G-6
G-6
G-6
G-6
G-6
G-6
G-4
G-1 G-1 G-1 G-1 G-1 G-1 G-1
B
S-1 SCALE : 1:100 M.
REPUBLIC OF THE PHILIPPINES DESIGNER: CHECKED BY : RECOMMENDING APPROVAL : RECOMMENDING APPROVAL : APPROVED BY : PROJECT TITLE : PROJECT NO: OWNER : SHEET NO:
DESIGNED BY:
DEPARTMENT OF EDUCATION
S
IE
INEERING D
PDO III, PFSED-DepED STRUCTURAL CONSULTANT, PFSED-DepED HEAD, PLANNING AND DESIGN UNIT CHIEF, PFSED-OPS UNDERSECRETARY FOUNDATION
AL
IC
SI
I
YS
NOTE:
THIS DRAWING, AS AN INSTRUMENT OF SERVICE IS THE PROPERTY OF PHYSICAL FACILITIES AND SCHOOLS ENGINEERING
DIVISION AND AS SUCH MUST NOT BE REPRODUCED OR COPIED IN PART OR IN WHOLE WITHOUT THEIR PERMISSION,
ALL DRAWINGS ARE TO BE RETURNED WHEN NO LONGER IN USE.
RG-2
RG-2
RG-2
RG-2
RG-2
RG-2
RG-2
RG-2
T-1
T-1
T-1
T-1
T-1
T-1
T-1
T-1
7000
RG-1 RG-1 RG-1 RG-1 RG-1 RG-1 RG-1
2500
RG-1
RG-1
RG-1
RG-1
RG-1
RG-1
RG-1
RG-1
RG-1 RG-1 RG-1 RG-1 RG-1 RG-1 RG-1
LC-120x40x20x2.0 PURLINS
12mm CROSS
SPACED @ 750 mm O.C
BRACINGS
WITH 10 SAGRODS @ MIDSPAN
A
S-2 SCALE : 1:100 M.
L1 L2
B
S-2
REBAR SPACING ALONG SHORT DIRECTION REBAR SPACING ALONG LONG DIRECTION
in mm in mm
THICK-
FLOOR SLAB
NESS LEFT SUPPORT MIDSPAN RIGHT SUPPORT LEFT SUPPORT MIDSPAN RIGHT SUPPORT REMARKS
LEVEL MARK REBAR REBAR
in mm SIZE SIZE
TOP BOTT. TOP BOTT. TOP BOTT. TOP BOTT. TOP BOTT. TOP BOTT.
LEVEL
SECOND
S-1 100 10 200 300 - 300 200 300 10 250 300 - 300 250 300 TWO-WAY
S-2 100 10 300 300 - 300 300 300 10 300 300 - 300 300 300 TWO-WAY
REPUBLIC OF THE PHILIPPINES DESIGNER: CHECKED BY : RECOMMENDING APPROVAL : RECOMMENDING APPROVAL : APPROVED BY : PROJECT TITLE : PROJECT NO: OWNER : SHEET NO:
DESIGNED BY:
DEPARTMENT OF EDUCATION
S
IE
INEERING D
PDO III, PFSED-DepED STRUCTURAL CONSULTANT, PFSED-DepED HEAD, PLANNING AND DESIGN UNIT CHIEF, PFSED-OPS UNDERSECRETARY ROOF DECK FRAMING PLAN
AL
IC
SI
I
YS
NOTE:
THIS DRAWING, AS AN INSTRUMENT OF SERVICE IS THE PROPERTY OF PHYSICAL FACILITIES AND SCHOOLS ENGINEERING
DIVISION AND AS SUCH MUST NOT BE REPRODUCED OR COPIED IN PART OR IN WHOLE WITHOUT THEIR PERMISSION,
ALL DRAWINGS ARE TO BE RETURNED WHEN NO LONGER IN USE.
100
125
5
TIE BEAM
12
10 300mm TEMP
(SEE SCHEDULE)
BARS BOTHWAYS
100
2ND FLOOR LEVEL TO
400
350
350
350
4-10 CONT. BARS
ROOF DECKLEVEL
125
10 @250
10mm
CUT BARS
L1 L2 L3
350 350 350
350
350
350
D
2ND FLOOR LEVEL
B E A M S C H E D U L E
BEAM S T E E L R E I N F O R C E M E N T S
DIMENSIONS S T I R R U P S
FLOOR BEAM
LEVEL MARK ( in / mm ) REBAR
LEFT MID SPAN RIGHT
10mm
L
(mm ) (UNLESS NOTED OTHERWISE)
b h TOP BOTTOM TOP BOTTOM TOP BOTTOM
NGL
G-1 200 400 20mm 2 2 2 2 2 2 1@50, 6@100, REST@200
Y-BARS
X-BARS G-3a 200 800 20mm 3 2 2 2 3 2 1@50, 8@175, REST@300
W
X-BARS
G-6 200 400 20mm 2 2 2 2 5 3 1@50, 6@100, REST@200
100 mm THICK
L G-7 250 500 20mm 5 3 2 6 5 3 1@50, 8@100, REST@200
GRAVEL BEDDING
SCALE NTS
S-3
RG-1 200 400 16mm 2 2 2 2 2 2 1@50, 6@100, REST@200
ROOF
LEVEL
RG-2 200 500 16mm 5 3 2 3 4 3 1@50, 8@100, REST@200
BEAM
FOOTING DIMENSIONS (mm)
TIE
REINFORCEMENT REMARKS
FOOTING TG-2 300 500 20mm 4 3 2 2 4 3 1@50, 8@100, REST@200
REPUBLIC OF THE PHILIPPINES DESIGNER: CHECKED BY : RECOMMENDING APPROVAL : RECOMMENDING APPROVAL : APPROVED BY : PROJECT TITLE : PROJECT NO: OWNER : SHEET NO:
DESIGNED BY:
DEPARTMENT OF EDUCATION
S
IE
INEERING D
PDO III, PFSED-DepED STRUCTURAL CONSULTANT, PFSED-DepED HEAD, PLANNING AND DESIGN UNIT CHIEF, PFSED-OPS UNDERSECRETARY
DET. STAIR ON GRADE, RAMP & BEAM
AL
IC
SI
I
YS
NOTE:
THIS DRAWING, AS AN INSTRUMENT OF SERVICE IS THE PROPERTY OF PHYSICAL FACILITIES AND SCHOOLS ENGINEERING
DIVISION AND AS SUCH MUST NOT BE REPRODUCED OR COPIED IN PART OR IN WHOLE WITHOUT THEIR PERMISSION,
ALL DRAWINGS ARE TO BE RETURNED WHEN NO LONGER IN USE.
C
S-3
200 4500
S-4
50 50 50 50 2200 2200
BOTTOM CHORD
2500
W-2
W
1 - 4-12x300mm LONG
1
2
-
W-2
W-2
W
-
ANCHOR STUDS
W
2
2
F
W-2
S-2
W-2
-
2150
W
W
S-4
50
2
W-2
- 200x200x10mm
W-2
W
2834
EMBEDED PLATE
1188
W-1
W-2
W-2
200
100
STB-2
E
W-2 S-4
2L-2x2x1/4 STRUT W-2 DC-1
DC-1
50
9500 S-3
SEE SCHEDULE OF
4500mm
2ND FLOOR LEVEL
DN S-2 (2ND/3RD LVL)
CB-1 FOR DETAIL OF REIN.
CB-1
PLAN
7000
A G-2
=
G-3a M
STB-2
EACH
SCALE 1 : 25 M S-3
S-3 2150
300mm
N
4500
3200
S-3
2856
6mm GUSSET PLATE
292
0
200
BOTTOM CHORD (FULLY
20
TREADS
WELDED TO BASE PLATED)
B-2
TO 6mm GUSSET PLATE (TYP.) 50 50 50 50
168
P
ORD CH
CH OR
P D MARK DESCRIPTION QTY SIZE 4-12x250mm LONG
TO
ANCHOR STUDS
15
W-1 TOP & BOT. CHORDS 2L 2"x2"x1/4" GROUND FLOOR LEVEL
200x200x10mm BASE
PLATE
W-2 WEB MEMBERS 2L 2"x2"x3/16"
FULL WELD
COLUMN OR BEAM
S-3
TG-3
O
KING POST
D K L
1 : 5 M
S-3
SCALE
ORD S-3 SCALE 1:50 M
S-3 SCALE 1:50 M
CH
P
TO 6mm GUSSET PLATE (TYP.)
16 @200 10 @300
FULL WELD
TEMP BARS
200mm 200
200
12 @120
200
H 16 @ 200
MAIN BAR MAIN BAR:
FULL WELD SCALE 1:5 M 4-16mm
S-3
0
F M
2
6mm GUSSET PLATE (TYP.) 12 @300
TIES : 10 mm
N DC-1
BOTTOM CHORD SCALE 1 : 25 M
SEE TRUSS ANCHORAGE DETAIL
S-3 (FROM LANDING TO
E W
-
1
10 @300 2ND/3RD FLOOR LEVEL)
SCALE 1 : 5 M 120x40x20x2.0mm
S-3 STEEL C-PURLINS
2-10
750mm O.C.
STEP BAR
10mm SAG ROD WITH 200mm
STANDARD NUTS & 10 @300
75
W-2
WASHERS @ EACH END
7
50
LC-120x40x20x2.0 6-10x200mm LONG
2-10
PURLINS
STEP BAR
75
1-10mm A-307
ANCHOR BOLT
L-2.5x2.5x1/4
100
100
100 100
100
CB-1
W-2
10mm @
TG-3
300mm o.c.
3-10mm STB-2
O P
G I J S-3
SCALE 1 : 25 M
S-3
SCALE 1 : 25 M
REPUBLIC OF THE PHILIPPINES DESIGNER: CHECKED BY : RECOMMENDING APPROVAL : RECOMMENDING APPROVAL : APPROVED BY : PROJECT TITLE : PROJECT NO: OWNER : SHEET NO:
DESIGNED BY:
DEPARTMENT OF EDUCATION
S
IE
INEERING D
PDO III, PFSED-DepED STRUCTURAL CONSULTANT, PFSED-DepED HEAD, PLANNING AND DESIGN UNIT CHIEF, PFSED-OPS UNDERSECRETARY
TRUSS DIAGRAM, DETAIL OF STAIR
AL
IC
SI
I
YS
NOTE:
THIS DRAWING, AS AN INSTRUMENT OF SERVICE IS THE PROPERTY OF PHYSICAL FACILITIES AND SCHOOLS ENGINEERING
DIVISION AND AS SUCH MUST NOT BE REPRODUCED OR COPIED IN PART OR IN WHOLE WITHOUT THEIR PERMISSION,
ALL DRAWINGS ARE TO BE RETURNED WHEN NO LONGER IN USE.
SYMBOL
1. ALL ELECTRICAL WORKS SHALL COMPLY IN ACCORDANCE WITH
e. PUSH BUTTON OUTLET - 1.20 M ABOVE FINISH FLOOR
f. FIRE ALARM & VIBRATING BELL - 0.30 M BELOW CEILING LINE
PANEL LP
20 20
20
20
mm
20 20
1800
GROUND TERMINAL
ELECTRICAL
GROUND FLOOR LINE
2
#8mm BARE COPPER WIRE
FIN. GRADE LINE
16mm O x 2.40m
I
COPPERWELD
GROUND ROD
REPUBLIC OF THE PHILIPPINES DESIGNER: CHECKED BY : RECOMMENDING APPROVAL : RECOMMENDING APPROVAL : APPROVED BY : PROJECT TITLE : PROJECT NO: OWNER : SHEET NO:
DESIGNED BY:
DEPARTMENT OF EDUCATION
INEERING D
PDO III, PFSED-DepED ENGINEER III, PFSED-DepED HEAD, PLANNING AND DESIGN UNIT CHIEF, PFSED-OPS UNDERSECRETARY GENERAL NOTES LEGEND
AL
IC
SI
I
YS
NOTE:
THIS DRAWING, AS AN INSTRUMENT OF SERVICE IS THE PROPERTY OF PHYSICAL FACILITIES AND SCHOOLS ENGINEERING
DIVISION AND AS SUCH MUST NOT BE REPRODUCED OR COPIED IN PART OR IN WHOLE WITHOUT THEIR PERMISSION,
ALL DRAWINGS ARE TO BE RETURNED WHEN NO LONGER IN USE.
CLASSROOM
UP
REPUBLIC OF THE PHILIPPINES DESIGNER: CHECKED BY : RECOMMENDING APPROVAL : RECOMMENDING APPROVAL : APPROVED BY : PROJECT TITLE : PROJECT NO: OWNER : SHEET NO:
DESIGNED BY:
DEPARTMENT OF EDUCATION
S
IE
INEERING D
PDO III, PFSED-DepED ENGINEER III, PFSED-DepED HEAD, PLANNING AND DESIGN UNIT CHIEF, PFSED-OPS UNDERSECRETARY GROUND FLOOR POWER LAYOUT
AL
IC
SI
I
YS
NOTE:
THIS DRAWING, AS AN INSTRUMENT OF SERVICE IS THE PROPERTY OF PHYSICAL FACILITIES AND SCHOOLS ENGINEERING
DIVISION AND AS SUCH MUST NOT BE REPRODUCED OR COPIED IN PART OR IN WHOLE WITHOUT THEIR PERMISSION,
ALL DRAWINGS ARE TO BE RETURNED WHEN NO LONGER IN USE.
UP
RAMP
UP
REPUBLIC OF THE PHILIPPINES DESIGNER: CHECKED BY : RECOMMENDING APPROVAL : RECOMMENDING APPROVAL : APPROVED BY : PROJECT TITLE : PROJECT NO: OWNER : SHEET NO:
DESIGNED BY: VDS
DEPARTMENT OF EDUCATION
S
IE
INEERING D
PDO III, PFSED-DepED ENGINEER III, PFSED-DepED HEAD, PLANNING AND DESIGN UNIT CHIEF, PFSED-OPS UNDERSECRETARY GROUND FLOOR LIGHTING LAYOUT
AL
IC
SI
I
YS
NOTE:
THIS DRAWING, AS AN INSTRUMENT OF SERVICE IS THE PROPERTY OF PHYSICAL FACILITIES AND SCHOOLS ENGINEERING
DIVISION AND AS SUCH MUST NOT BE REPRODUCED OR COPIED IN PART OR IN WHOLE WITHOUT THEIR PERMISSION,
ALL DRAWINGS ARE TO BE RETURNED WHEN NO LONGER IN USE.
RD RD RD RD RD RD RD RD
1000
7000
2500
PVCVTR
1000
LN. OF STRUCTURE
50mm
RD RD RD RD RD RD RD RD
PVCVTR
R
E
W
0
75mmPVCDS
0
E
E T O
S
T ES T
50mm
1
R P
2
S
C
M
V
A
0
P
0
S
0
5
N
5
Y
2
S
3
L
P
W
S
R
C
K
T
I
N
W
V
V
G
T
C
P
V
V
C
P-1
m
V
m
m
C
P
W
2
SCALE : 1 : 100 METERS
m
I
m
1
T
0
T
V
0
S
P
m
C
1
C
E
m
V
S
V
0
P
R
5
W
m
C
W
m
m
I
T
m
0
0
P
G
V
W
0
W
0
5
C
T
0
1
V
1
O
0
m
P
C
C
2500 1000
E
0
V
2
P
0
1
m
S
m
m
3
4
75mm
5
m
-
S
2
R
D
0
D
C
B
E
PVCWP
S
C m
C
I
V m
R
C
S
W
P 5
O
7
C
D
D
3950
V
A
C
D
75mmPVCDS
L
E
F
4
H
H
-
D
2
-
75mmPVCDS
L
D
W
L
S R
C
W
R VT
I
C
R
G
E
D
I
C
G
P
m
C
m
m
m
0
m
O
m
2
m
D
2
P
C
m
F
1
W
0
C
5
5
V
2300
2000
P
m
m
0
SEPTIC TANK
0
1
P
U
Y
L
P
PVCSP TO
N P
L
m I U
W
m A S
C
I
8 M R
O E
G
T T
NEAREST SEWER
W
3
G
D
B
V
C m
C
SYSTEM
V m
M
P 5
M
O
7
G
O
V
R
D
S
150mmCPD 150mmCPD 150mmCPD
C m
S
75mmPVCDS
V m
A
S
P 5
L
CB CB CB
7
CB
75mmPVCDS
D
P
C
m
U MP
m
D
F
0
B
P
R
100mm
C
5
1
7
5
PVCSP
m
V
m
C
P
75mm 75mm
D
W
C
P
75mm PVCDS 75mm
m
100mm PVCSP
M
0
PVCDS PVCDS
T
D
1
S
Y
P
PVCDS
75mPVCDS
75mPVCDS
S
C
E
m
50mm PVCVTR
G
75mPVCDS
A
75mPVCDS
N
B
I
C m
C
A
5
5
0
m
m
P
V
C
V
T
W
R
V m
P
1
S
RISER
D
M
D
P 5
C
O
m N
WC
m I
O
50mPVCTR
0 A
5 M
R
D
S
1 O
GICWL
T
C m
S
SHE 12mm GICWL
V m
A
S
P 5
L
75mmPVCDS
7
HE
75mmPVCDS
D-4 50mm PVCVTR
D
D-4
P
100mm PVCWP D-3
C
m
PVCVTW
RISER
D
F
0
B
12mm
C
5
50mPVCTR
FD
1
D-3
CS CO
ROOF LINE
50mm PVCVTW
50mm
CO
D
100mm PVCSP
P
S
C
D
WC
m
C
m
V
0
P
5
D-2
1
HCR
M
12mm GICWL
O
m
O
5
R
7
D
S
C m
S
FD
V m
A
S
C
P 5
L
150mm
7
LAV 50mm PVCVTW
75mmPVCDS
RISER
CO
B
20mm GICWL
C
E
N
I
L
F
O
O
R
CDP
D
5
P
0
C
m
m
m
0
5
C
1
D
P
S
D
C
V
P
m
m
5
7
B
UP
M
E
T
S
Y
S
E
G
A
N
I
A
R
P
D
D
C
m N
m I
0 A
5 M
1 O
T
FD FD FD
75mPVCDS
75mPVCDS
75mPVCDS
75mm PVCDS
PVCDS PVCDS PVCDS
RAMP
WATER SUPPLY
GICWL
150mm CDP
UP
TO MAIN
38mm
150mmCPD 150mmCPD 150mmCPD
CB CB CB CB
GV
1 M
GV
3
P-1 P-1
TO MAIN DRAINAGE SYSTEM
CDP
150mm
150mm
REPUBLIC OF THE PHILIPPINES DESIGNER: CHECKED BY : RECOMMENDING APPROVAL : RECOMMENDING APPROVAL : APPROVED BY : PROJECT TITLE : PROJECT NO: OWNER : SHEET NO:
DESIGNED BY:
DEPARTMENT OF EDUCATION
S
IE
INEERING D
HEAD, PLANNING AND DESIGN UNIT CHIEF, PFSED-OPS UNDERSECRETARY PLUMBING RO-IN LAYOUT, ROOF DRAIN LAOUT,
PDO III, PFSED-DepED ENGINEER III, PFSED-DepED
AL
ISOMETRIC VIEW
IC
SI
I
YS
PFSED-DepED
ON
LOCATION : DATE :
PH
De ED
p
NOTE:
THIS DRAWING, AS AN INSTRUMENT OF SERVICE IS THE PROPERTY OF PHYSICAL FACILITIES AND SCHOOLS ENGINEERING
DIVISION AND AS SUCH MUST NOT BE REPRODUCED OR COPIED IN PART OR IN WHOLE WITHOUT THEIR PERMISSION,
ALL DRAWINGS ARE TO BE RETURNED WHEN NO LONGER IN USE.
CO CLEAN OUT
CV CHECK VALVE
HB HOSE BIBB
FD FLOOR DRAIN
100
100
NGL
MH PVCDP POLYVINYL CHLORIDE DRAIN PIPE
VAR
INLET
100
PVCSP POLYVINYL CHLORIDE SOIL PIPE
350
300
WATER LEVEL 700
25
WATER
LEVEL PLASTERED W/WATERPROOFING
COMPOUND OR APPLY ONE FACE PVCVAC POLYVINYL CHLORIDE VENT. ACROSS CEILING
150 700 150
PLASTERED W/ WATERPROOFING BITUMEN TAR 150 400 150
WALLS REINFORCEMENT COMPOUND OR APPLY ONE
LEACHING 10mm VERT. & HOR. BAR FACE BITUMEN TAR
PVCVP POLYVINYL CHLORIDE VENT. PIPE
2125
CHAMBER @200mm OC BW
DIGESTIVE CHAMBER
DIGESTIVE (W. LEVEL)
150
DRAINAGE PIPE
@200mm O.C BWAYS
100mm THK. SLAB W/
1600
700
400
INLET OUTLET
150 2500 150
PVCWS POLYVINYL CHLORIDE WASTE STACK
150 1000 150 3200 150
2800
RD ROOF DRAIN
150
100mm THK. + FIM. SLAB W/
10mm REBARS @300mm O.C. BW
2 UD URINAL DRAIN
P-3
SCALE : 1:50 Mts.
3 5a WC WATER CLOSET
2-10mm EXTRA
S-1a 100mm THK. + FIN. SLAB W/ CS COUNTER SINK
BARS TOP/BOT. ON 10mm REBARS @ 300mm O.C.
TWO PARALLEL SIDE BENT UP 2 OUT OF 3 AT L/4 150MM THK. CHB W/ 10mm
FROM FACE OF SUPPORT B.W. REBARS HOR. EVERY 2-LAYERS
700
VERT. @600mm O.C.
4650
150
1000
150
3200
150 150 400 150
200 600 200 1100 150 700 150 1100 75 75mm 1. GRADES OF HORIZONTAL PIPINGS
PVCDS
RUN ALL HORIZONTAL PIPINGS IN PERPECT ALIGNMENT AND AT A FORM GRADE NOT LESS THAN TWO PERCENT (2%)
150
100
2. CHANGE IN DIRECTION
CDP
ALL CHANGE IN DIRECTION SHALL BE MADE BY APPROPRIATE USE OF FORTY-FIVE DEGREES (45) WYES, LONG SWEEP
900
OUTLET QUARTER BEND, SIXTH-EIIGHT OR SIXTEENTH BEND. WHEN THE CHANGE OF FLOW IS FROM HORIZONTAL TO VERTICAL A
50
2% SLOPE SINGLE 1/8 BEND COMBINATION MAYBE USED ON VERTICAL STACKS AND SHORT QUARTER BENDS MAYBE USED ON WASTE
INLET
CDP LINE, TEE AND CROSSES MAYBE USED IN BENT PIPES.
(VARIABLE)
50 600 50
600 min.
2% SLOPE
50
2800
2500
3. PROHIBITED FITTINGS
MH MH OUTLET
NO DOUBLE HUB OR TEE BRANCH SHALL BE USED ON HORIZONTAL SOIL AND WASTE LINES, THE DRILLINGS AND TAPPING
100
10mm BAR
OF HOUSE DRAIN, WASTE OR VENT PIPES AND USED OF SADDLE HUB AND BEND ARE PROHIBITED.
HANDLE 3-10mm (E.W.)
50 (TYP.)
100
P-3
1.
4. PIPE CLEAN-OUTS
2 600
900
50 50
3 5 VAULT ROOF SLAB.
8. ALL PLUMBING WORKS SHALL BE UNDER THE SUPRVISION OF A LICENSED MASTER PLUMBER AND A LICENCED PLUMBING
1 4 CONTRACTOR.
1. CONCRETE
fy = 230 MPa
4. ASSUMED ALLOWABLE BEARING CAPACITY Y = 100KPa
WATER TABLE IS 1500 BELOW GROUND LEVEL.
REPUBLIC OF THE PHILIPPINES DESIGNER: CHECKED BY : RECOMMENDING APPROVAL : RECOMMENDING APPROVAL : APPROVED BY : PROJECT TITLE : PROJECT NO: OWNER : SHEET NO:
DESIGNED BY:
DEPARTMENT OF EDUCATION
S
IE
INEERING D
HEAD, PLANNING AND DESIGN UNIT CHIEF, PFSED-OPS UNDERSECRETARY SEPTIC TANK, CATCH BASIN DETAIL, LEGEND, NOTES
PDO III, PFSED-DepED ENGINEER III, PFSED-DepED
AL
SI
I
YS
NOTE:
THIS DRAWING, AS AN INSTRUMENT OF SERVICE IS THE PROPERTY OF PHYSICAL FACILITIES AND SCHOOLS ENGINEERING
DIVISION AND AS SUCH MUST NOT BE REPRODUCED OR COPIED IN PART OR IN WHOLE WITHOUT THEIR PERMISSION,
ALL DRAWINGS ARE TO BE RETURNED WHEN NO LONGER IN USE.