Scribd
Upload
127 views1 page

Temperature Difference EC

This document contains calculations for temperature differences and resulting stresses in a concrete structure for heating and cooling conditions. It specifies the type of construction as a concrete slab, beams, and box girders. Temperature differences are calculated for various depths (h1, h2, h3, h4) within the total depth (h) of 1.57m. Material properties of both in situ and precast concrete are provided. Stresses are then calculated and plotted for both heating and cooling conditions.

Uploaded by

Irfan Ali
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
127 views1 page

Temperature Difference EC

This document contains calculations for temperature differences and resulting stresses in a concrete structure for heating and cooling conditions. It specifies the type of construction as a concrete slab, beams, and box girders. Temperature differences are calculated for various depths (h1, h2, h3, h4) within the total depth (h) of 1.57m. Material properties of both in situ and precast concrete are provided. Stresses are then calculated and plotted for both heating and cooling conditions.

Uploaded by

Irfan Ali
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 1

DOCUMENT No.(Project / Doc) SHEET No.

Date
SUBJECT
PREPARED BY:

REF CALCULATIONS OUTPUT

EN 1991-1-5 Type of construction: a) Concrete slab b) Concrete beams c) Concrete box girders
2003 (E)
inc corrigenda Heating -Temperature Difference Cooling -Tempereture Difference
Dec 2009 and
T1 T1 h1
Mar 2009 h1
T2 h2
Fig 6.2c h2 T2
h h

T3 h3
h3 T3 h4
T4

h (total) = 1.57 m
Surfaced = Yes E concrete in situ = 31 kN/mm
Surfacing depth = 0.1 m E concrete precast= 34 kN/mm
Waterproofed = No Alpha = 1.20E-05 / oC

h1 = 0.3h but < 0.15m h1 = h4 = 0.20h but < 0.25m


h2 = 0.3h but > 0.1m and < 0.25m h2 = h3 = 0.25h but < 0.20m
h3 = 0.3h but <( 0.1m + surfacing depth in m)
( for thin slabs, h3 is limited by h - h1 - h2)

h1 = 150 mm h1 = h4 = 250 mm
h2 = 250 mm h2 = h3 = 200 mm
h3 = 200 mm
Cooling
Heating
1800

1800 1600
-8.40
1570
1600 1400
13.50 -0.50
1400 3.00 1320 0
1570 1200
1420 1120
1200
0 1000
1170
1000
800
800
600
600 0
450
-1.00 400
400 250
0 -6.50 200
200
200 2.50 0
0 0
0 -10 -8 -6 -4 -2 0
0 5 10 15

Cooling - Stresses
Heating - Stresses
1800
1800
-3.12 1600
1600
1570
5.02 1400
1400 1.12 -0.19
1420 1570
1320 0 1200
1200
0 1120
1170 1000
1000
800
800
0 600
600
-0.37 450 400
400 250
0 200
200 200 -2.42
1.02 0
0 0
0 -4 -3 -2 -1 0
0 2 4 6

You might also like