Model 6733, 6734: Test Lead Wire With Silicone or PVC Insulation Features

Download as pdf or txt
Download as pdf or txt
You are on page 1of 1

Model 6733, 6734

Test Lead Wire with Silicone or PVC Insulation

Features
Same wire as used with the Pomona test
leads and patch cords.

Make your own Extra Long test leads,


jumpers or patch cords.

Fits Pomona Do-It-Yourself banana plugs


and jacks.

High temperature and voltage ratings.

Silicone insulation with high wire strand


count allows for superb flexibility.

Wear indication with double insulated (dual


extruded) silicone leads shows white inner
layer for increased safety.

Wire will comply with International Safety


Standard CAT III, IEC61010-031
requirements when correctly terminated
with other components designed to meet
CAT III, IEC61010-031 requirements.

Specifications: 6733 6734


Insulation: Silicone PVC
Length: 50 FT (15,2 meters) 50 FT (15,2 meters)
Wire size: 18 AWG 18 AWG
Wire: 192 X 41 bare copper 65 X 36 tinned copper
Diameter (OD): .144 (3,60mm) .144 (3,60mm)
Temperature: -58 to +302F (-50 to +150C) -4 to +221F (-20 to +105C)
Wire Rated Voltage: 10,000 DC * 5,000 DC *
Current: 20 A 15 A
Ordering Information:
Black Wire: 6733-0 6734-0
Red Wire: 6733-2 6734-2
* Hands free testing in controlled voltage environment: For CE compliance: not intended for hand held use at
voltages above 30 Vrms /42.2 Vpk / 60 Vdc or when current exceeds 8A maximum.

USA: Sales: 800-490-2361 All dimensions are in inches. Tolerances (except noted): .xx = .02 (,51 mm),
Technical Support: [email protected] .xxx = .005 (,127 mm). All specifications are to the latest revisions.
Fax: 425-446-5844 Specifications are subject to change without notice. Registered trademarks are
Europe: 31-(0) 40 2675 150 International: 425-446-5500 the property of their respective companies.
Where to Buy: www.pomonaelectronics.com

Copyright 2012 D1100092 Rev. 101 Page 1 of 1

You might also like