0% found this document useful (0 votes)
359 views2 pages

Danfoss Presostat PDF

Uploaded by

Sinisa Malesevic
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
0% found this document useful (0 votes)
359 views2 pages

Danfoss Presostat PDF

Uploaded by

Sinisa Malesevic
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 2

Installation guide

Pressure switch
Types KP 34, KP 35, KP 36 and KP 37
060R9365

060R9365
KP 34, KP 35, KP 36 and KP 37 Ptest max.

t1 min. -40 F KP 34: 87 psi


t1 max. 149 F KP 35: 319 psi
KP 36: 319 psi
t2 min. -40 F KP 37: 465 psi
t2 max. 212 F

No maintenance is required for the switches after final installation.

CAUTION:
The mounting panel must be plane to avoid damage of switch.
Danfoss A/S (AC-MCI / jmn), 2013-11 IC.PI.P10.E3.02 / 520B5882 1
CAUTION:
Disconnect power supply before wiring connections are made or service to avoid possible electrical shock or damage
to equipment.
Do never touch live parts with your fingers or with any tool.

Please note: scale in KP units is indicative only. For accurate


setting or when using according to FM approval use additional
pressure gauge to set the unit.

When used acc. to UL or FM regulations

Listed refrigeration
controller 61B5
Voltage FL LR Resist. Pilot
AC DC A A lead duty
240 8 48 8A
3A
120 16 96 16A
240 12W

Use copper wire only


Tightening torque 20 lb. in.

Contact system with standard AG contacts Contact system with gold contacts
Single pole changeover switch (SPDT). Single pole changeover switch (SPDT): 130 mA, 5...30 V DC.

Alternating current: Contact load when Au surface isburned away:


AC-1: 16 A, 400 V Alternating current:
AC-3: 16 A, 400 V AC-1: 10 A, 400 V
AC-15: 10 A, 400 V AC-3: 6 A, 400 V
AC-15: 4 A, 400 V
Direct current:
DC-13: 12 W, 220 V Direct current:
DC-13: 12 W, 220 V

2 IC.PI.P10.E3.02 / 520B5882 Danfoss A/S (AC-MCI / jmn), 2013-11

You might also like