Operator

LOGO

ZXUR 9000 GSM Base Station Controller

Version Date Author Reviewer

V1.0 12/7/2015 Tongkun YanHaibo,DingNan

<> 12 , 3
ZTE Proprietary Confidential

Notes

First Released

<> 12 , 4
Number Name
1 ZXUR 9000 Cabinet
2 Enhanced Resouce Shelf
3 Enhanced Resouce Shelf 2
4 Universal Management Process Board
5 Universal Management Process Board
6 Universal Service Process Board
7 Enhanced GE Base Switch Board
8 Enhanced GE FABRIC Switch Board
9 Enhanced SDH Digital Trunk Board GSM Version
10 Enhanced SDH Digital Trunk Board TDM Version
11 Enhanced Digital Trunk Board TDM Version
12 Enhanced GE Process Board
13 Enhanced SDH Digital Trunk Board IP Version
14 Enhanced Digital Trunk Board IP Version
15 Enhanced Trans Coder Board
16 Universal Service Process Board 2a
17 Enhanced GE Base Switch Board 2a
18 Enhanced 10GE FABRIC Switch Board 1a
19 Enhanced SDH Digital Trunk Board GSM Version 2a
20 Enhanced SDH Digital Trunk Board TDM Version 2a
21 Enhanced Digital Trunk Board TDM Version 2a
22 Enhanced GE Process Board 2a_SM
23 Enhanced GE Process Board 2a_MM
24 Enhanced GE Process Board 2a_EI
25 Enhanced 10GE Process Board 1a_SM
26 Enhanced 10GE Process Board 1a_MM
27 Enhanced 10GE Process Board 1b_SM
28 Enhanced 10GE Process Board 1b_MM
29 Enhanced SDH Digital Trunk board IP version 2a
30 Enhanced Digital Trunk board IP version 2a
31 2M Bits Clock Cable(75ohm)
32 2M Bits Clock Cable(120ohm)
33 Data Trunk Cable (120ohm)(DB44)
34 Data Trunk Cable (75ohm)(DB44)
35 Data Trunk Cable (100ohm)(DB44)
36 Hyper category 5 network cable
37 Single Mode Fiber (LC/PC)
38 -48V DC Power Cord(blue)
39 Protective Ground Wire(yellow green)
40 Operational Ground Wire(black)
41 Multimode Fiber
Functions Description Abbreviation Unit Remark
The ZXUR 9000 GSM rack consists of the top frame, base
- KIT -
frame, posts, rails, and side door.
- ERS KIT -
Processes global procedure, controls the operation and
ERS2 KIT -
maintenance of the entire system, and connects OMM
NE operation
through internaland Ethernet.
maintenance.As the core of ZXUR 9000 GSM UMP PCS OMM
loperation
Implements the ECMM functions. The ECMM module
UMP PCS OMP
luses
andEGFS thehas a built-in
maintenance,
ATCA standard.clockItdirectly
UMP1b module.
is responsible
or indirectly
for powering
monitorson
Processes the user plane protocols and the control plane
and
the Master
manages shelfthe boards in the USP PCS -
protocols.
system
board Provides
inand
the manages
shelf
systemandstratum-2
the
loading
configuration
versions.
clock and of
In multiple
each
addition,
board it and
The Enhanced SDH Digital Trunk Board GSM Version EGBS PCS -
other components.
monitors
reference the
input.
entire shelf, for
(ESDTG) is an interface board for TDM channelized STM-
example,
Distributes
the power,
inter-shelf
temperature,
and intra-shelf
and fanclock
status.signals. EGFS PCS -
1 access. It is applied to TDM Abis and Ater interfaces.
2 Implements
Subordinateinter-shelf
shelf control plane switching.
When
The Enhanced
speech enhancement
SDH Digital Trunk is supported,
Board TDM the Version
TDM A ESDTG PCS -
3 Provides
Receives front
clock
boards
signalwithandexternal
distributenetwork
in theports.
shelf.
interface should
(ESDTT) is an interface
be configured
board. withIt implements
an ESDTG TDMboard STM-1
as
2 Implements
The Enhancedinter-shelf
Digital Trunk media Board
plane TDMswitching
Versionfunction.
(EDTT) is ESDTT PCS -
the interface
access, and is board.
appliedThetoESDTG
the TDMboard A interface.
only supports the
2The
an interface
EGFS board.
board only
It implements
supports the the BETC/2
TDM E1/T1 backplane.
access
The
BETC/2 enhanced
ESDTTbackplane.GE only
board Process Boardthe
supports (EGPB)
BETC/2 is an interface EDTT
backplane. PCS -
function.
The
board enhanced SDH Digital
for GE interface Trunk
(optical board IP version
or electrical) access and IP
The EDTT board only supports the BETC/2 backplane. EGPB PCS -
(ESDTI)
processing. is an interface board for IP STM-1 access , PPP
and ML-PPP
The enhanced
EGPB board processing
Digital
onlyTrunk andBoard
supports FRthe processing
IP versionbackplane.
BETC/2 on
(EDTI)
the Gb is an ESDTI PCS -
interface board
. The ESDTI
for channelized
board only IPsupports
E1 access, the PPP,
BETC/2 ML-
l.PPP
Thisprocessing
backplane.board actsand as anFRECMM, which oncomplies with ATCA EDTI PCS -
1. The EGFS board has aprocessing
built-in clock the Gb interface.
module.
standards.
CodeEDTI
The The board
conversion,
board also
ratesupports
only provides
adaptation. power-on
the BETC/2 and version ETCB
backplane. PCS -
Master shelf
loading
This board for boards
processes inside the shelf, and
control-plane monitors
protocols andthe user-
The master shelf provides a level-2 system clock and USP2a PCS -
environment
plane protocols. of the shelf, including the power supply,
multiple reference inputs.
temperature, and fans. EGBS2a PCS -
The master shelf distributes inter-shelf and intra-shelf
The
2. ThisESDTG2a is an interface
board provides externalboard networkfor TDM
ports channelized
for front
clock signals. EXFS1a PCS -
STM-1
boards.access. It applies to TDM Abis and Ater interfaces.
Slave shelf
When
3. Thisitboard
supports the speech
implements enhancement
control-plane function,
switching the ESDTG2a
between PCS -
The slave shelf receives clock signals and distributes
shelves.
TDM
The ESDTT2a
A interfaceisneeds
an interface
to be configured
board for TDM as anchannelized
interface
them inside the shelf. ESDTT2a PCS -
board. access. It applies to TDM A interface.
STM-1
The
2. The EDTT2a
EGFS is an interface
board implements board for TDM E1/T1
media-plane access.
switching
EDTT2a PCS -
The
betweenEGPB2a is an interface board for GE interface
shelves.
access and IP processing. It provides single-mode optical EGPB2a PCS -
The EGPB2a is an interface board for GE interface
fiber interfaces.
access and IP processing. It provides multi-mode optical EGPB2a PCS -
The EGPB2a is an interface board for GE interface
fiber interfaces.
access and IP processing. It provides electrical interfaces. EGPB2a PCS -
The EXGB1a is an interface board for 10GE interface
access and IP processing. It provides single-mode optical EXGB1a PCS -
The EXGB1a is an interface board for 10GE interface
fiber interfaces and applies to the ERS2.
access and IP processing. It provides multi-mode optical EXGB1a PCS -
The EXGB1b is an interface board for 10GE interface
fiber interfaces and applies to the ERS2.
access and IP processing. It provides single-mode optical EXGB1b PCS -
The EXGB1b is an interface board for 10GE interface
fiber interfaces and applies to the ERS.
access and IP processing. It provides multi-mode optical EXGB1b PCS -
The ESDTI2a is an interface board for channelized
fiber interfaces and applies to the ERS.
IPSTM-1 access, PPP and MLPPP processing, and Gb ESDTI2a PCS -
The EDTI2a is an interface board for channelized IP E1
interface FR processing.
access, PPP and MLPPP processing, and Gb interface EDTI2a PCS -
FR processing.
- - PCS -
- - PCS -
- E1 PCS -
- E1 PCS -
- E1 PCS -
- - m -
- - PCS -
- - m -
- - m -
- -
- - m -
Link
Cabinet and Subrack
Cabinet and Subrack
Cabinet and Subrack
Boards
Boards
Boards
Boards
Boards
Boards
Boards
Boards
Boards
Boards
Boards
Boards
Boards
Boards
Boards
Boards
Boards
Boards
Boards
Boards
Boards
Boards
Boards
Boards
Boards
Boards
Boards
Cables
Cables
Cables
Cables
Cables
Cables
Cables
Cables
Cables

Cables
ZTE Proprietary Confidential

<> 12 , 8
ZTE Proprietary Confidential

Number
1

<> 12 , 9
ZTE Proprietary Confidential

<> 12 , 10
ZTE Proprietary Confidential

<> 12 , 11
ZTE Proprietary Confidential

<> 12 , 12