Hdpe 080M60
Hdpe 080M60
Hdpe 080M60
Typical Properties:
Resin Properties
0
Melt Flow Index (190 C & 2.16 Kg) ASTM D 1238 gm/10 min 8.0
o 3
Density @ 23 C ASTM D 1505 gm/cm 0.960
Mechanical Properties
Tensile Yield Strength ASTM D 638 MPa 25
Elongation at Yield ASTM D 638 % 11
Elongation at Break ASTM D 638 % >800
Flexural Yield Strength ASTM D 790 MPa 20
Flexural Modulus ASTM D 790 MPa 850
o
Notched Izod Impact Strength @ 23 C ASTM D 256 J/m 90
Hardness ASTM D 2240 Shore D 55
Thermal Properties
o
Vicat Softening Point (10 N) ASTM D 1525 C 127
* Typical values not to be construed as specification limits. Values may change without any prior notice.
* Mechanical properties tested on injection molded specimen.
o
Recommended Processing Temperature: 180 215 C
Packaging Information:
This material is packed and available in raffia bags with net content of 25.0 Kg only. The raffia bags used conforms to the minimum strength requirements of BIS,
however, customer shall take due care while handling the bag. Prolonged exposure of these bags to sunlight may deteriorate the bags performance and cause
spillage and wastage. IOCL does not warranty loss of material due to poor material handling practices.
00-12/13