Data Sheet

conference
Confidea WCAP G3
Preliminary
Generation III
Wireless Conference Access Point

Art. 71.98.0033

Description
Confidea G3 is the 3rd generation of Televics The new, more powerful built-in webserver
renowned wireless conference system. This offers all necessary functionality for basic set-
Quad Band system operates in the 2.4 GHz and up and control through a regular browser. In
5 GHz area of the RF spectrum and offers a this way, no additional software is required for
large amount of possible operating frequencies basic discussion applications representing yet
in four different bands. another cost saving.
The 3rd generation Confidea WCAP+ is a real The web interface adapts to the device that is
power horse that can act as a full central unit used so the system can just as well be controlled
in a stand-alone configuration. This presents from a desktop, a tablet or a smartphone.
significant cost savings as for a wireless-only
Through the browser, microphone status is
set-up no extra central unit is required. It also
displayed and delegate microphones can be
means that such a set-up is extremely easy to
switched on and off through a simple mouse
deploy and even the not so technically savvy
click. Easy for when someone left his or her
can have a system out of the box and fully up
microphone open accidently.
and running in minutes.

Leo Bekaertlaan 1 8870 Izegem Belgium Tel. +32 51 30 30 45 Fax +32 51 31 06 70

E-mail: [email protected] Web: http://www.televic-conference.com
Confidea WCAP V3.1 Televic reserves the right to change specifications without notice 1
Note: Confidea is a registered trademark by Televic
The new web interface also allows creating Accessories
microphone groups and adding name labels
without any additional software: an absolute Confidea APPS 71.98.0041
ly unique feature. Access point power supply
The updating of the system with newer
software has been made simpler and can be Connectivity
caried our through the same web interface.
Power connector
RJ45 LAN connection
RJ45 in from central control unit (future
functionality)
RJ45 out to next access point (future
functionality)
6.3 mm jack balanced analog in
The audio in- and outputs make it easy to 6.3 mm jack balanced analog out
connect the Confidea system to external
systems. Two overload activity LEDs

The external processing setting allows the 3 R-SMA antenna connectors

integration of mixing or audio processing
equipment.
The audio connections also allow an easy
integration in a video conferencing setup. In
this case, the mix-minus or N-1 setting prevents
echo caused by audio feedback from the far
end. But also a less complex addition to the
system such as a handheld wired or wireless
microphone is a piece of cake using the input
jack.
In more advanced and complex installations,
the Confidea system can be controlled via the
fully compatible CoCon Control software. This
opens up all functionalities that this software
suite has to offer: delegate management,
agenda management, synoptic view, room
display and complex voting management.
A single WCAP has a range of 30m in open
field

Televic reserves the right to change specifications without notice 2

Note: Confidea is a registered trademark by Televic
Specifications

Electrical Setting 2: Consumer output levels

Supply voltage 24 DC (+/- 10%) Nominal output -10 dBV
Ethernet port LAN, TCP/IP level (Zload = 10 kOhm)

Modulation OFDM Max. output level +10 dBV

(Zload = 10 kOhm)
Transmitting power < 20 dBM
Frequency response 20 - 16000 Hz
System Total Harmonic 0.1% (@ nominal
Sample rate max. 32 kSps Distortion level, 1 KHz)

Sample width max. 24 bits Dynamic Range Min. 90 dB

Number of audio max. 64 Load impedance Min. 600 Ohm

channels
Environment
Frequency response 20 - 16000 Hz
Fan noise no fan
Setting 1: Professional input levels
Operation 5-50C
Nominal input level + 4 dBu temperature
Max. input level + 24 dBu
Frequency response 20 - 16000 Hz
Maximum 2048 units

Total Harmonic 0.1% (@ nominal

Maximum of open microphones : 6
Distortion level, 1 KHz) Battery Autonomy: + 28 hours
Dynamic Range Min. 90 dB Camera control on webserver
Input impedance 10 kOhm Maximum number of chairmans:
- Stand alone mode : unlimited
Setting 2: Consumer input levels
Nominal input level -10 dBV
Microphone modes:
- Direct access
Max. input level + 10 dBV
- Chairman alway get the floor
Frequency response 20 - 16000 Hz
- VOX
Total Harmonic 0.1% (@ nominal
Distortion level, 1 KHz) - Group 1-6
Dynamic Range Min. 90 dB - Override
Input impedance 10 kOhm For further information, see the Confidea G3
manual.
Setting 1: Professional output levels
Nominal output + 4 dBu
level (Zload = 600Ohm)
Max. output level + 24 dBu
(Zload = 600Ohm)
Frequency response 20 - 16000 Hz
Total Harmonic 0.1% (@ nominal
Distortion level, 1 KHz)
Dynamic Range Min. 90 dB
Load impedance Min. 600 Ohm

Televic reserves the right to change specifications without notice 3

Note: Confidea is a registered trademark by Televic
Connection Diagram (without voting) Connection Diagram (With voting)

Analog Analog Analog Analog

OUT IN OUT IN
Built - in Built - in
webbrowser: webbrowser:

LAN LAN LAN LAN

Optional: Required:
CoCon Discussion WCAP + CoCon Discussion WCAP +

CoCon Signage CoCon Voting

Optional:
CoCon Signage
CoCon Authentication

Televic reserves the right to change specifications without notice 5

Note: Confidea is a registered trademark by Televic