Engineering Data

FXV Closed Circuit Cooling Towers

Engineering Data
Single Inlet . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1

Dual Air Inlet . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2

Structural Support . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5
 Engineering Data
Single Air Inlet Models
Motor HP Weights (lbs) Dimensions Connection Sizes2,3
Internal
Spray Coil
Model Nominal Heaviest Make-Up Pump Volume
FXV Engineering Data

Number Tons5 Fan Pump Operating1 Shipping Section L W H A P Water Coil (GPM) (GAL)
FXV-L421 30 5 7,730 5,050 2,900 46
FXV-L422 41 5 8,190 5,370 3,220 60
FXV-L423 46 5 8,680 5,710 3,560 74
FXV-L424 55 7.5 9,160 6,050 3,900 88
1.5 6 1-1/4 8 5-1/4 13 2-3/4 6 3/4 1 3-3/4 1-1/2 4 190
FXV-421 33 7.5 7,730 5,050 2,900 46
FXV-422 46 7.5 8,190 5,370 3,220 60
FXV-423 52 7.5 8,680 5,710 3,560 74
FXV-424 59 10 9,160 6,050 3,900 88
FXV-L431 53 7.5 11,230 7,160 4,240 69
FXV-L432 68 7.5 11,930 7,650 4,730 90
FXV-L433 75 7.5 12,630 8,140 5,220 112
FXV-L434 86 10 13,380 8,680 5,760 133
2 9 1-1/4 8 5-1/4 13 2-3/4 6 3/4 1 4-1/4 1-1/2 4 290
FXV-431 57 10 11,230 7,160 4,240 69
FXV-432 73 10 11,930 7,650 4,730 90
FXV-433 81 10 12,630 8,140 5,220 112
FXV-434 95 15 13,380 8,680 5,760 133
FXV-L441 83 10 14,200 8,760 5,120 91
FXV-L442 100 10 15,150 9,410 5,770 120
FXV-L443 110 10 16,080 10,060 6,420 149
FXV-L444 130 15 17,070 10,770 7,130 178
1-1/2 4
FXV-441 92 15 14,200 8,760 5,120 91
FXV-442 111 15 15,150 9,410 5,770 120
3 12 1-1/4 8 5-1/4 13 2-3/4 6 3/4 1 8-1/4 500
FXV-443 122 15 16,080 10,060 6,420 149
FXV-444 140 20 17,070 10,770 7,130 178
FXV-LQ440 79 10 15,150 9,410 5,770 124
FXV-LQ441 116 15 17,070 10,770 7,130 182
1-1/2 6
FXV-Q440 88 15 15,150 9,410 5,770 124
FXV-Q441 125 20 17,070 10,770 7,130 182
FXV-L641 126 15 18,560 10,890 6,730 146
FXV-L642 154 15 20,050 11,930 7,770 192
FXV-L643 169 15 21,550 12,980 8,820 238
FXV-L644 193 20 23,050 14,040 9,880 284
1-1/2 4
FXV-641 144 25 18,560 10,890 6,730 146
FXV-642 175 25 20,050 11,930 7,770 192
FXV-643 193 25 21,550 12,980 8,820 238
5 12 1-1/4 11 10 15 10-3/4 8 8-3/4 1 8-3/4 715
FXV-644 215 30 23,050 14,040 9,880 284
FXV-LT642 169 15 21,550 12,980 8,820 284
FXV-T642 192 25 21,650 13,080 8,920 284
FXV-LQ640 118 15 20,050 11,930 7,770 194
1-1/2 6
FXV-LQ641 168 20 23,050 14,040 9,880 286
FXV-Q640 134 25 20,050 11,930 7,770 194
FXV-Q641 186 30 23,050 14,040 9, 880 286
FXV-L661 202 22.5 27,070 15,510 9,690 218
FXV-L662 234 22.5 29,290 17,070 11,250 288
FXV-L663 257 22.5 31,570 18,670 12,850 358
FXV-L664 297 30 33,810 20,280 14,460 429
1-1/2 4
FXV-661 231 40 27,070 15,510 9,690 218
FXV-662 267 40 29,290 17,070 11,250 288
FXV-663 295 40 31,570 18,670 12,850 358
7.5 18 1-1/4 11 10 16 4-1/4 9 2-1/4 2 3/8 900
FXV-664 331 45 33,810 20,280 14,460 429
FXV-LT662 263 22.5 33,790 20,260 14,440 429
FXV-T662 297 40 33,810 20,280 14,460 429
FXV-LQ660 189 22.5 29,290 17,070 11,250 299
1-1/2 8
FXV-LQ661 269 30 33,810 20,280 14,460 439
FXV-Q660 215 40 29,290 17,070 11,250 299
FXV-Q661 299 45 33,810 20,280 14,460 439

Do not use for construction. Refer to factory certified dimensions.

1 Baltimore Aircoil Company

Copyright Baltimore Aircoil Comany 2009
 Engineering Data
Dual Air Inlet Models
Motor HP Weights (lbs) Dimensions
Spray Internal Coil
Nominal Heaviest Pump Volume
Model Number Tons6 Fan Pump Operating 1
Shipping Section L W H (GPM) (GAL)
FXV Engineering Data

FXV-288-31M 344 20 46,000 27,680 8,050 600

FXV-288-31N 367 25 46,030 27,710 8,050 600
FXV-288-31O 386 30 46,080 27,760 8,050 600
FXV-288-31P 419 40 46,240 27,920 8,050 600
FXV-288-31Q 445 50 46,250 27,930 8,050 600
FXV-288-31R 468 60 46,465 28,145 8,050 600
FXV-288-41M 364 20 49,690 30,440 9,430 712
FXV-288-41N 389 25 49,720 30,470 9,430 712
FXV-288-41O 412 30 49,770 30,520 9,430 712
FXV-288-41P 448 40 49,930 30,680 9,430 712
FXV-288-41Q 478 50 49,940 30,690 9,430 712
FXV-288-41R 502 60 50,155 30,905 9,430 712
15 11 11 24 1/2 18 10-3/8 1,720
FXV-288-2TM 349 20 49,690 30,440 9,430 712
FXV-288-2TN 372 25 49,720 30,470 9,430 712
FXV-288-2TO 392 30 49,770 30,520 9,430 712
FXV-288-2TP 424 40 49,930 30,680 9,430 712
FXV-288-2TQ 449 50 49,940 30,690 9,430 712
FXV-288-2TR 470 60 50,155 30,905 9,430 712
FXV-288-1QM 325 20 49,690 30,440 9,430 706
FXV-288-1QN 347 25 49,720 30,470 9,430 706
FXV-288-1QO 365 30 49,770 30,520 9,430 706
FXV-288-1QP 394 40 49,930 30,680 9,430 706
FXV-288-1QQ 418 50 49,940 30,690 9,430 706
FXV-288-1QR 439 60 50,160 30,910 9,430 706
FXV-364-31N 442 25 53,900 31,630 9,390 696
FXV-364-31O 463 30 53,950 31,680 9,390 696
FXV-364-31P 496 40 54,110 31,840 9,390 696
FXV-364-31Q 525 50 54,120 31,850 9,390 696
FXV-364-31R 550 60 54,335 32,065 9,390 696
FXV-364-31S 579 75 54,435 32,165 9,390 696
FXV-364-41N 464 25 58,260 34,910 11,030 828
FXV-364-41O 489 30 58,310 34,960 11,030 828
FXV-364-41P 530 40 58,470 35,120 11,030 828
FXV-364-41Q 561 50 58,480 35,130 11,030 828
FXV-364-41R 589 60 58,695 35,345 11,030 828
FXV-364-41S 624 75 58,795 35,445 11,030 828
15 13 11-1/8 26 3-1/2 19 0-3/8 1,720
FXV-364-2TN 443 25 58,260 34,910 11,030 828
FXV-364-2TO 463 30 58,310 34,960 11,030 828
FXV-364-2TP 498 40 58,470 35,120 11,030 828
FXV-364-2TQ 526 50 58,480 35,130 11,030 828
FXV-364-2TR 549 60 58,695 35,345 11,030 828
FXV-364-2TS 574 75 58,795 35,445 11,030 828
FXV-364-1QN 420 25 58,260 34,910 11,030 862
FXV-364-1QO 442 30 58,310 34,960 11,030 862
FXV-364-1QP 472 40 58,470 35,120 11,030 862
FXV-364-1QQ 499 50 58,480 35,130 11,030 862
FXV-364-1QR 522 60 58,700 35,350 11,030 862
FXV-364-1QS 550 70 58,800 35,450 11,030 862

Notes:
1. Operating weight is for the tower with the water level in the cold 5. Models shipped with an optional gear drive or low sound fan
water basin at the overflow. may have heights up to 10.5" greater than shown. Models with
2. The actual size of the inlet and outlet connection may vary with Whisper Quiet Fans may have heights up to 5-1/2 greater than
the design flow rate. Consult unit print for dimensions. shown.
6. Nominal tons of cooling represents 3 GPM of water cooled
3. Inlet and outlet connections are beveled for welding.
from 95F to 85F at a 78F entering wet-bulb temperature.
4. Standard make-up, drain and overflow connections are located
7. For FXV-44xx, the riser pipe diameter is 4. For FXV-6xx and all
on the bottom of the unit. Make-up connection is 1-1/2 MPT
dual air inlet models, the riser pipe is 6.
standpipe, drain is 2 FPT and overflow is 3 FPT. On single air-
inlet models, standard make-up, drain and overflow connections 8. Dimensional reference drawings.
are MPT.

2 Baltimore Aircoil Company

Copyright Baltimore Aircoil Comany 2009
 Dimensional Reference Drawings
FXV Engineering Data

3" OVERFLOW

2" DRAIN

Single Air Inlet Models

6" FLUID OUT

6" FLUID IN

Dual Air Inlet Models

3 Baltimore Aircoil Company

Copyright Baltimore Aircoil Comany 2009
 Engineering Data:
Cold Weather Operation
FXV Heat Loss Data (BTUH)
Model Standard Unit w/ Unit w/ PCD
FXV Engineering Data

Number Unit PCD Hood Hood & Insulation

FXV-421 68,400 43,500 30,100
FXV-422 87,100 47,100 32,300
FXV-423 105,200 50,500 34,700
FXV-424 122,400 54,000 37,000

FXV-431 102,800 60,800 43,200

FXV-432 131,200 65,600 46,500
FXV-433 158,000 70,600 49,600
FXV-434 183,000 74,900 52,800

FXV-441 135,700 76,700 55,200

FXV-442 172,900 82,100 59,100
FXV-443 208,000 87,600 62,900
FXV-444 241,000 92,900 66,500
FXV-Q440 172,900 82,100 59,100
FXV-Q441 241,000 92,900 66,500

FXV-641 203,400 103,800 75,300

FXV-642 259,800 109,700 79,300
FXV-643 313,100 115,600 83,200
FXV-644 362,900 121,300 86,900
FXV-T642 362,900 121,300 86,900
FXV-Q640 259,800 109,700 79,300
FXV-Q641 362,900 121,300 86,900

FXV-661 304,500 158,200 118,000

FXV-662 387,500 165,500 123,000
FXV-663 404,700 172,400 127,600
FXV-664 536,900 179,100 132,200
FXV-T662 536,900 179,100 132,200
FXV-Q660 387,500 165,500 123,000
FXV-Q661 536,900 179,100 132,200
FXV-288-31x 760,200 280,700 202,000
FXV-288-41x 881,100 294,500 211,000
FXV-288-2TX 881,100 294,500 211,000
FXV-288-1Qx 881,100 294,500 211,000
FXV-364-31x 894,000 330,100 237,600
FXV-364-41x 1,036,200 346,400 248,100
FXV-364-2TX 1,036,200 346,400 248,100
FXV-364-1Qx 1,036,200 346,400 248,100
Notes:
1 Heat loss based on 50F entering coil water and -10F ambient
with 45 MPH wind (fans and pump off).
2. One inch thick PVC nitrite rubber blend thermal insulation on both
the PCD hood and the casing panels surrounding the coil.

Dimensional Data of Positive Closure Damper Hood

Notes:
Model Hood Ship. Operating Weight Add Length Hood Height Unit Height
Number Weight (lbs.) (lbs.) (L) Width (W) (Y) (H) 1. Hood shipping weight
includes shipping skid
FXV-42x 390 320 5 11-7/8 3 5-1/4 2 5-1/8 15 1-3/4 weight.
FXV-43x 540 430 8 11-7/8 3 5-1/4 2 5-1/8 15 1-3/4
FXV-44x 720 570 11 11-7/8 3 5-1/4 2 5-1/8 15 1-3/4
FXV-64x 1,160 920 11 11-7/8 5 3-1/2 2 5-1/8 17 9-3/4
FXV-66x 1,650 1,300 17 11-7/8 5 3-1/2 2 5-1/8 17 9-3/4
FXV-288-xxx 1,300 1,040 11 11 6 3-3/8 2 5-1/8 20 2-5/8
FXV-364-xxx 1,500 1,200 13 11-1/8 6 3-3/8 2 5-1/8 20 2-5/8

4 Baltimore Aircoil Company

Copyright Baltimore Aircoil Comany 2009
 Structural Support
The recommended support arrangement for FXV Closed Circuit Cooling Towers consists of parallel
I-beams positioned as shown on the drawings. Besides providing adequate support, the steel also
serves to raise the unit above any solid foundation to assure access to the bottom of the tower.
Alternate steel support designs include a cantilevered plan as indicated by the optional minimum D
FXV Engineering Data

dimension in the table below. To support an FXV on columns or in an alternate arrangement not shown
here, consult your local BAC Representative.

Single Air Inlet

Optional Maximum
Model Number D Minimum D* Deflection
FXV - 42x 8 3 5 9 3/16

FXV - 43x 8 3 5 9 5/16

FXV - 44x 8 3 5 9 3/8

Air FXV - 64x 11 7-3/4 8 0 3/8

Inlet
FXV - 66x 11 7-3/4 8 0 1/2

*When unit is supported with a cantilever plan, the side

opposite the air inlet shall be cantilevered.

Dual Air Inlet

Maximum
Model Number D Deflection
FXV-288-xxx 23 9-1/8 1/2

FXV-364-xxx 26 0-5/8 1/2

Air Air
Inlet Inlet

Notes:
1. Support steel and anchor bolts to be designed and furnished 4. If vibration isolation rails are to be used between the unit and
by others. supporting steel, be certain to allow for the length of the vibration
rails (by others) when determining the length of the supporting
2. All support steel must be level at the top. steel, as vibration rail length and mounting hole locations may
3. Beams must be selected in accordance with accepted structural differ from those of the unit.
practice. Maximum deflection of beam under unit to be 1/360 5. If point vibration isolation is used with multi-cell units, the isolators
of span, not to exceed 1/2 inch. must be located under the support steel, not between the support
steel and the closed circuit cooling towers.

5 Baltimore Aircoil Company

Copyright Baltimore Aircoil Comany 2009