Scribd
Upload
123 views3 pages

MSCS-BC R14.1 NTP Server Configuration

This document provides reference configuration details (DT) for the URC (Universal Reference Clock) in MSCS R14.1 at different levels: 1. SPX1 - The URC is configured with GARP using two NTP servers as sources. Commands show the URC is active and connected to both servers. 2. SPX2 - The URC configuration is repeated without IP details. 3. Configuration for the Integrated Site Services involves inputting the NTP server address on the Address of NTP Reference page and verifying a green indicator for connection.

Uploaded by

mathur_mayur
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOC, PDF, TXT or read online on Scribd
123 views3 pages

MSCS-BC R14.1 NTP Server Configuration

This document provides reference configuration details (DT) for the URC (Universal Reference Clock) in MSCS R14.1 at different levels: 1. SPX1 - The URC is configured with GARP using two NTP servers as sources. Commands show the URC is active and connected to both servers. 2. SPX2 - The URC configuration is repeated without IP details. 3. Configuration for the Integrated Site Services involves inputting the NTP server address on the Address of NTP Reference page and verifying a green indicator for connection.

Uploaded by

mathur_mayur
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOC, PDF, TXT or read online on Scribd
You are on page 1/ 3

Configuration Reference DT

1.1.1 Reference DT of MSC R14.1 for SPX1

The following is the reference DT example of the URC configuration in


MSCS-BC R14.1 level, here GARP is used and configured as the URC.

!Example to Confiure RP=4 as one of the URC!

EXEMI:EQM=OCITS-0, RP=4, EM=0, SUID="9000/CXC 146 084 R2D01;

EXEMI:EQM=JOB-0, RP=4, EM=1, SUID="9000/CAA 140 090 R1A03";

OCADI:Dev=OCITS-0, IP=xx.xx.xx.xx, NETMASK=xx.xx.xx.xx,


GATEWAY=xx.xx.xx.xx,NOTCPSB;

!Here the above IP address information is assigned by customer for the


RP=4!

CADES:DEV=0,RC=URC1;

CAUCS:IPB1=10,IPB2=147,IPB3=8,IPB4=105,URC=1;!Define the NTP


Server as one source of the NTP for URC1!

CAUCS:IPB1=10,IPB2=147,IPB3=8,IPB4=104,URC=1;!Define the NTP


Server as another source of the NTP for URC1!

CAUCI:URC=1; !Initiate the URC synchronization from the external NTP


server!

<caucp:urc=1;

URC INFORMATION

URC URCSTATE SERVER SERVERSTATE

1 ACTIVE 10.147.8.105 CONNECTED

10.147.8.104 CONNECTED

CABUE:URC=1;!Deblock the URC!

!Check the System Clock by command!

CACLP:ALL;

!You can see that the URC1 is connected as the reference clock of the
system and the state is active,it is then ok!

<caclp:all;

TIME

DATE TIME SUMMERTIME DAY DCAT

120701 093145 AUTOMATIC


REFERENCE CLOCKS

RC DEV STATE

URC1 JOB-0 ACTIVE

URC2 NOT CONNECTED

URC3 NOT CONNECTED

1.1.2 Reference DT of MSC R14.1 for SPX2

EXEMI:EQM=OCITS-0, RP=4, EM=0, SUID="9000/CXC 146 084 R2D01;

EXEMI:EQM=JOB-0, RP=4, EM=1, SUID="9000/CAA 140 090 R1A03";

OCADI:Dev=OCITS-0, IP=xx.xx.xx.xx, NETMASK=xx.xx.xx.xx,


GATEWAY=10.225.79.141,NOTCPSB;

CADES: DEV=0, RC=URC1;

CAUCS: IPB1=10,IPB2=147,IPB3=8,IPB4=105,URC=1

CAUCS: IPB1=10,IPB2=147,IPB3=8,IPB4=104,URC=1;

CAUCI:URC=1;

1.1.3 Configuration IS

In the Integrated Site Services, press Administration, click Address of NTP


Reference, then input NTP server address. If the green face appears,it
appove the NTP server connected.

You might also like