Scribd
Upload
180 views

Win Tensor-UserGuide FunctionF5

This document contains a worksheet for testing values of the F5 function in the Win-Tensor program. It includes input values for stress magnitudes, adjustable parameters for the F5 function, and calculations of resolved stresses, normalization factors, and F5 values for different fracture types and fault slip data. The worksheet calculates F5 for tension fractures, compression fractures, shear fractures, and slickensided fault data using the input stresses and parameters.

Uploaded by

Sandi Putrazony
Copyright
© © All Rights Reserved
Available Formats
Download as XLS, PDF, TXT or read online on Scribd
180 views

Win Tensor-UserGuide FunctionF5

This document contains a worksheet for testing values of the F5 function in the Win-Tensor program. It includes input values for stress magnitudes, adjustable parameters for the F5 function, and calculations of resolved stresses, normalization factors, and F5 values for different fracture types and fault slip data. The worksheet calculates F5 for tension fractures, compression fractures, shear fractures, and slickensided fault data using the input stresses and parameters.

Uploaded by

Sandi Putrazony
Copyright
© © All Rights Reserved
Available Formats
Download as XLS, PDF, TXT or read online on Scribd
You are on page 1/ 4

Worksheet for testing values of function F5 in Win-Tensor program

Input cells Calculation cells Result cells


Arbitrary stress magnitudes Adjustable paramters Current value Default
S1mag 100 F5exp: Exponent for func 2 2
Psi (=S3mag / S1mag) 0.6 F5max : Function
F5prop : Relative maxim 360 360
S3mag (=S1mag x Psi) 60 contribution of the two 0.055555
0.05
DeltaMag 40 members for fault-slip
data
Resolved shear stress
alpha 13.1 (angle between resolved shear direction and observed slip line)
Nmag 14.208 (Resolved normal stress magnitude) Nnorm 35.52
Tmag 22.13691 (Resolved shear stress magnitude) Tnorm 55.342275
Angle beta: angle on Morh circle between line going from S2 on the horizontal axis towards S3 and the line going from S2 to the point on the Mohr circle.
With Ntmax = 120,7106781 : maxium possible value for (Nmag + Tmag) for beta angle = 0 - 180

Calculation of Ntmax (the maximum possible value of D (Differential N (Normalization F5 = D * N


(Nmag + Tmag) on a Mohr Circle stress factor) factor)
F5 Tension fractures (Nnorm-Tnorm) F5max /
Nmag + Tmag
angle beta Radian Nmag Tmag ^F5exp (NTmax^F5exp) F5
0 0 0 0 0.00000 0 0.024706494 0.0000 Minimum value for beta = 0
135 2.356194 85.35533906 35.35534 120.71068 14571.06781187 0.024706494 360.0000 Maximum value for beta = 135
F5 Compression fractures (Nnorm-Tnorm) F5max /
S1mag - Nmag + Tmag
angle beta Radian Nmag Tmag ^F5exp (NTmax^F5exp) F5
45 0.785398 14.64466094 35.35534 120.71068 14571.06781187 0.024706494 360.0000 Minimum value for beta =45
180 3.141593 100 6E-015 0.00000 3.7493995E-029 0.024706494 0.0000 Maximum value for beta = 1805

Calculation of optimization function F5 (Nnorm-Tnorm) F5max /


Nnorm+Tnorm
Nnorm Tnorm ^F5exp (NTmax^F5exp) F5
Tension fractures 35.52 55.34228 90.862275 8255.953018176 0.024706494 203.9757
S1mag - Nmag + Tmag F5
Compression fractures 35.52 55.34228 119.822275 14357.37758618 0.024706494 354.7205
Nnorm - Tnorm + (100-Ntmax) F5
Shear fractures 35.52 55.34228 0.8884031 0.7892600681 0.024706494 0.0195
Slickensided fault Sin (Sin(alpha/2))^F5exp *
angle alpha Radian (alpha/2) F5max Member1 x (1-R) Max. value
Member 1 13.1 0.228638132 0.11407 4.6843258898 4.45011 18.00
Nnorm - Tnorm + (Nnorm-Tnorm) F5max /
Nnorm Tnorm (100 - Ntmax) ^F5exp (NTmax^F5exp) Member2 x R
Member 2 35.52 55.34228 0.8884031 0.7892600681 0.024706494 0.019500 0.00097 342.00
F5 F5 4.45108 360.00

You might also like