INTRODUCTION

The collection of data about the spatial

distribution of significant properties of the
Earths surface in the form of maps by
navigators, geographers, and surveyors has
long been an important part of activities of
organized society.
Topographical maps can be regarded as
general purpose maps, while thematic maps for
assessment and understanding of natural
resources are for specific purposes.
 The use of aerial photography and remote
sensing has made it possible to map large
areas with greater accuracy for producing
thematic maps of large areas, for resource
exploitation and management.
Handling of large volume of data for
quantitative spatial variation of data requires
appropriate tool to process the spatial data
using statistical methods and time series
analysis.
 Introduction of computer assisted cartography,
many new tools were developed to perform
spatial analysis of the data and to produce
maps in desired formats.
These operations required a powerful set of
tools for collecting, storing, retrieving,
transforming, and displaying spatial data from
the real world for a particular set of purposes.
This set of tools constitutes a Geographic
Information System (GIS).
 A GIS is an information system that is designed
to work with data referenced by spatial or
geographical coordinates.

Data collection Data storage Manipulation and

analysis

Planning User User action Output

needs products
 DEFINITION OF GIS
A Geographic Information System should be
thought of as being much more than means of
coding, storing, and retrieving the data about the
aspects of earths surface, because these data
can be accessed, transformed, and manipulated
interactively for studying environmental process,
analyzing the results for trends, or anticipating
the possible results of planning decisions.
Geographical Information System is associated
with basic terms, Geography and Information
system.
The literal interpretation of geography is writing
about the Earth. In writing about the Earth,
geographers deal with the spatial relationship of
land with man.
 A key tool in studying the spatial relationships
is the map which is a graphical portrayal of
spatial relationships and phenomena over a
small segment of the Earth or the entire Earth.
On the other hand, an information system is a
chain of operations that consists of, from
planning the observation to using the
observation-derived information in some
decision making process.
 Thus, a GIS is both a database system with
specific capabilities for spatially-referenced
data as well as a set of operations for working
with the data.
Some of the definitions of GIS given in different
publications are

A system which uses a spatial database to

provide answers to queries of a geographical
nature.
 A computer assisted system for the capture,
storage, retrieval, analysis, and display of
spatial data within a particular organization.
A powerful set of tools for collecting storing,
retrieving at will, and displaying spatial data
from the real world.
An organized collection of computer hardware,
software, geographical data, and personnel
designed to efficiently capture, store, update,
manipulate, analyze, and display all forms of
geographically referenced information (ESRI).
 The last definition given above is one of the
most rigorous definitions of GIS.
This definition includes requirement of
personnel trained in the technology who can
capture, store and update the data, and
provide answers to the complex queries of the
management by integrating information
contained in various layers, through maps,
tables, and charts.
 A GIS is also the result of linking parallel
developments in many separate spatial data
processing as shown in Fig.
Computer aided deign and
computer graphics

Cartography Surveying and

(high quality drafting) photogrammetry
GIS
Remote sensing Spatial analysis using
technology rasterized data from thematic
maps
Interpolation from
point data

Linking of several related fields though GIS

 COMPONENTS OF GIS
The components of GIS can be defined in
various ways, but very comprehensively, it
can have the following components:
(i) Computer system (hardware & operating
system),
(ii) Software,
(iii) Spatial data,
(iv) Data management and analysis procedures,
(v) Personnel to operate the GIS.
 Hardware Components

V.D.U
Keyboard Mouse

Disk drive
Digitizer
C.P.U.
Tape
drive Scanner

Printer Plotter

Major hardware components of a GIS

 Hardware Components
The hardware components of a GIS
comprise of a Central Processing Unit
(C.P.U.), disk drive, tape drive, digitizer,
plotter, and visual display unit (V.D.U.)

The disk drive and tape drive are

basically data storage devices.
The tape can be used for communicating
with other systems.
 A digitizer and scanner are input devices to
convert graphics into digital data.
The Visual Display Unit along with a keyboard
or mouse is required to interact with the
computer.
The printer is required to get hardcopy of the
reports, tables, charts, etc where as the plotter,
an output device, converts the digital data into
the graphical form.
The Central Processing Unit of a computer
interacts with various hardware components,
and performs computations and analysis.
 SOFTWARE
The GIS software package has the following
set of modules for performing
a) digitization,
b) editing,
c) overlaying,
d) networking,
e) vectorising,
f) data conversion,
g) Analysis,
h) for answering the queries, and
i) generating output.
 SPATIAL DATA
Spatial data are characterized by information
about position, connections with other
features and details of non-spatial
characteristics.
All GIS softwares are designed to handle
spatial data.
Spatial data require spatial referencing using
a suitable geographic referencing system
which should be flexible and lasting, since a
GIS may be intended to last many years.
 A traditional method of representing the
geographic space occupied by spatial data in
a GIS environment is in the form of a series of
thematic layers.

The spatial data represented as either layers

or objects are simplified by breaking down all
geographic features with three basic entity
types, points, lines and areas, before they can
be stored in the computer.
 DATA MANAGEMENT & ANALYSIS
Input data in the forms of spatial data and
non-spatial data, and information about their
linkages, and updating of data are the most
expensive and time-consuming part of any
GIS project.

Data input is the process of converting data

from its existing form to one that can be used
by the GIS.
 The management of data in GIS includes
storage, organization, and retrieval using a
database management system (DBMS).

The DMBS should provide support for multiple

users and multiple databases allowing
efficient updating and minimizing the
redundant information.

It should also allow data independence,

security, and integrity.
GIS analysis procedures include
a) storage and retrieval capabilities for
presenting the required information,
b) queries allowing the user to look at patterns
in the data,
c) prediction or modeling capabilities to have
information about what data might be at
different time and place.
d) The data output in GIS depends on cost
constraints, the type of users, and output
devices available.
 Personnel Operating GIS
A GIS project requires trained personnel who
can plan, implement and operate the system.

They should also be capable of making

decisions on the basis of the output.
The success of any GIS project depends
upon the skill and training of the personnel
handling the project.
 GEOGRAPHICAL CONCEPTS
The geographic features can be represented
by three basic entity types: points, lines, and
areas.
A spatial object represents a geographical
area having a number of different kinds of
associated attributes or characteristics.
A spatial object with no area is a point that
can be associated with a range of data, such
as wells, rain gauge stations.
One of the key attributes of a point is its
geographical location represented in terms of
coordinates, such as latitude and longitude.
 GEOGRAPHICAL CONCEPTS
When a spatial object is made up of a
connected sequence of points, it is referred to
as a line.
Lines have only linear dimension, i.e., they do
no have width, and a specified location is
given on one side of the line and not on the
line itself.
Attributes to a line could be the number of the
wells that the line separates in an area having
wells.
Nodes are defined as the special kinds of
points that usually indicate the junction
between lines or the ends of line segments.
 A closed area is represented by a polygon.
A polygon can be simple when it consists of
undivided areas or complex when it is divided
into areas of different characteristics.
Chains are special kind of line segments
which correspond to a portion of the
bounding edge of a polygon.
 In the context of spatial objects, the concepts
of scale and resolution must also be clearly
understood.
Scale is the ratio of distances represented on a
map or photograph to their true distances on
the Earths surface.
A scale of 1:50,000 indicate that one unit of
distance on a map is equal to 50,000 of the
same unit, on the ground.
A map may be a small-scale map or large-
scale map.
 Resolution is an important concept when dealing
with spatial data.
It literally meaning is distinguishing the individual
parts of an object, or the degree to which detail is
visible in a photograph or on a television.
In case of spatial data, a more specific definition is
the content of the geometric domain divided by
the number of observations, normalized by the
spatial dimension.
Area
Mean resolution element =
Number of Obseration
Smaller is the mean resolution element; higher is
the resolution of dataset.
 INPUT DATA FOR GIS
Input data for GIS cover all aspects of capturing spatial
data and the attribute data.
The sources of spatial data are
(i) existing maps,
(ii) aerial photographs,
(iii) satellite imageries,
(iv) field observations, and
(v) other sources.
The spatial data not in digital form are converted into
standard digital form using digitizer or scanner for use in
GIS.
 Aerial Satellite Field Other
Map photograph imagery observation
sources

Digital
input data

GIS
 TYPES OF OUTPUT PRODUCTS
a) Thematic maps
b) Chloropleth maps
c) Proximal or dasymetric maps
d) Contour maps
e) Dot maps
f) Line maps
g) Land form maps
h) Animated maps
i) Non-map graphics
 Thematic maps concentrate on spatial
variations of a single phenomenon (e.g.,
population) or the relationship between
phenomena (e.g., different classes of land
cover).
 Choropleth maps are typically used to
communicate the relative magnitudes of
continuous variables as they occur within the
boundaries of unit areas (e.g., average
annual per capita income as it varies by
country).

In these maps, different tones, colours, and

shading patterns are used to convey the
variations in different areas.
 Proximal or dasymetric maps focus on the
location and magnitude of areas exhibiting
relative uniformity (e.g., land cover classes).

Different colours and shading patterns are

used to describe differences in the thematic
values.
 DASYMETRIC MAPS

Figure A and B, represent the two data inputs needed to produce a dasymetric
representation of population density. Figure C is the output map as a result of the
input parameters.
(A) Land-Cover re-code from a collection of input sources (land-cover, slope, open
space);
(B) Block-group population density;
(C) Dasymetric map output after interpolation
Contour maps represent quantities by lines of
equal value to emphasize gradients among
the values.
Contour lines may be used to indicate
variation in topography of a region, high and
low pressure regions
 ISOLINES
An isoline map is a map with continuous lines joining
points of the same value.
Examples would be equal altitude (contour lines),
temperature (isotherms), barometric pressure
(isobars), wind speed (isotachs), wind direction
(isogon), wind shear (isoshear), etc.
Isoline mapping is used to interpret the information
on some thematic maps.
 Dot density maps, or dot maps, portray the geographic
distribution of discrete phenomena using an arrangement
of identical point symbols, most commonly dots.
A technique dates to at least the 19th century and is today
accepted as one of the primary techniques for
representing geographic patterns.
Particularly useful for understanding global distribution of
the mapped phenomenon and comparing relative
densities of different regions on the map.
Easy to understand, requiring little cognitive effort by the
map reader when compared to isoline maps.
However, retrieval of specific information from dot density
maps is difficult, as map users find manual counting of
dots tedious and tend to underestimate dot totals as
density increases.
 Line maps show the direction and magnitude
of potential or actual flow (e.g., to show
sources and destinations as well as the
volume of product transported from one state
to others).
 Land form maps depict the earths surface as
it were viewed from an oblique aerial point
view.
 Animated maps are generally used to display
sequences through time (e.g., growth of a city
as its population and area increase through
time).
 Some users/analysts prefer to get the
results of analysis displayed by means of
non-map graphics.
Some of the simple and common graphic
presentation techniques are
a) Bar charts
b) Pie charts
c) Scatter plots
d) Histograms
 Bar charts used to illustrate difference in an
attribute between categories (e.g., time-
varying distribution of land use in an area
such as urban, suburban, and rural).
 Pie charts for displaying information by dividing
a circle into sectors representing proportions of
the whole (e.g., in a state percentage of rural,
suburban, and urban population).
 Scatter plots for displaying behaviour of one
attribute verses another attribute (e.g., yield
and applied fertilizer).
 Histograms to show the distribution of a
single attribute to examine the way the
attribute is apportioned among the different
possible values (e.g., percentage of
education at primary, secondary, higher, and
other levels).
 APPLICATION OF GIS
GIS finds its application in all those areas where
professionals are involved in management and
planning utilizing analysis of large amount of
geographical data that relates to space, typically
involving positional data.
Positional data determine where things are or
perhaps, where they were or will be. In other
words, it is dealing with questions related to
geographic space. Some of the typical
applications may be as under.
(i) A forest manager may want to optimize
production of timber using data on soil and
current tree stand distribution under a number of
operational constraints.
 APPLICATION OF GIS

A geologist may be interested in identifying

the best dam site by analyzing the
earthquake data of the area, and rock
formation characteristics.

A geoinformatics engineer may want to

determine the best sites for his companys
relay stations taking into account the land
prices, topography, etc.
 GIS is used to study the phenomena which are
man-made or natural.
Urban planning essentially requires a thorough
understanding of the interrelationships
between various entities such as road
connectivity, schools, hospitals, police stations,
etc., with respect to human settlements.
On the other hand, in geomorphology, ecology,
and soil studies, natural phenomena, such as
rock formation, plate tectonics, distribution of
soils, are analyzed.
GIS applications also consist of study of both
natural as well as man-made entities together.
 The study of effect of human activity on the
environment, referred to as environmental
impact assessment involves analysis of data
about both natural and man-made features.
A study on the growing industrial units in an
area is a problem of environmental impact
assessment.
GIS has distinct application in feasibility studies
such as site suitability and simulation studies in
erosion modeling.
THANK
YOU