Installation of Mplab and Hi Tech C Pro Pr9
Installation of Mplab and Hi Tech C Pro Pr9
HEAD to TOE
MPLAB IDE and HI-TECH PICC-Lite Installation
HI-TECH Software is the third party compilers for PIC10/12/16 and PIC18,
dsPIC, PIC24 and PIC32 devices. It is the only compiler vendor with comprehensive
support for all PIC10/12/14/16/17/18/24/32 MCUs, plus the dsPIC Digital Signal
Controllers. HI-TECH Software has teamed with Microchip Technology Inc. for over a
decade. It is a world class provider of ANSI C compilers: many featuring Omniscient
Code GenerationTM (OCG) --a whole-program compilation technology. The Lite mode
has OCG optimizations disengaged, and is ideal for entry level students and hobbyists.
The HI-TECH PICC-Lite version 9.60PL1 compiler is comes together with the installer
of MPLAB V8.10.
Please install MPLAB IDE and HI-TECH PICC Lite according to the following
steps.
3. After all the directions shown in the welcome note (as in following diagram) is
done, please click Next> for next step.
4. Please select I accept the terms of the license agreement if it is not selected in the
diagram below, and click Next> after this.
5. Please select Complete for the setup type to install all program features, and click
Next> to next step.
7. Please select I accept the terms of the license agreement if it is not selected in the
diagram below, and click Next> after this.
8. Please select I accept the terms of the license agreement again for the window
shown below, and click Next> after this.
10. Please wait for awhile for the installation process shown in diagram below.
11. A window will pop out if there is any program that did not close at the beginning
of the installation, user is recommended to close the entire unnecessary program
and click Retry to proceed on the installation. User may also click on Ignore if
you need to run the other program concurrently. For this example, Ignore is
clicked.
13. A window for Question will pop out, please click OK to proceed with installation
of HI-TECH C..
15. Please select I accept the terms of the license agreement if it is not selected in the
diagram below, and click Next to Install HI-TECH C PRO.
17. Please select Add to environment path if it is not selected in the diagram below,
and click Next to proceed.
19. Please click Finish after successfully installed the HI-TECH C PRO.
20. The installation of MPLAB V8.20a is completed. Please click Finish to exit. User
may need to restart the computer just after the installation or restart later.
21. After restart computer, a window MPLAB IDE Document Select will pop out, user
may view the release notes from Microchip if want to.
22. When open MPLAB IDE, a console window will pop out at the first time after
installation. Please wait for awhile, after that the console window will close
automatically.
23. The MPLAB IDE will show as diagram below, user may start build your own
project.