0.

N/A
Main Discipline Area (Skill Level)
1. Very low knowledge
2. Low knowledge, but know whom to contact and where to look for info.
3. Some knowledge which can be built on. Questions can be answered and discussions around the program/function
can be handled. Can demo with structured material.
4. Good knowledge, can handle support calls with confidence. Can deliver training. Initial Design Hull Outfitting Plant Schematics BoCad Product Development
5. Very high knowledge. Aware of the background of the program/functionality and can answer most questions without
having to check documentation and/or consult developer. Can take active role in a workshop and benchmark

APPLEGARTH

STOCKFISCH
DOAN-TRINH
ALEXANDRE

WECHSELER
TOURANIAN

ROUSSEAU
SHASHANK
BROWNLIE
KIZILOCAK

BURROWS
ZALEWSKI

JONSSON

ANTHONY

SOMAYEH
HORRELL

KENNETH

PHAM THI
GUSTAVO
STEPHEN
TOOTELL

NICOLAS
MORTON
ROWLES

ROWLES

BUHREN
SHARDA

CUERVO
KERNEN

SELCAN
WRIGHT
MACIEJ

TINGLE
ZGUR

UYEME

JOERG
WAYNE

HENRY
GLYNN
JAMES
PAGET

STEVE

CHRIS
KEVIN

DAVID

BUCK

BEDIN
BRYN

JOHN

GERT
STAN

JOEL
NICK

IGBE
ALF
IAN
This manual
TM-0001
is for AVEVA Training
personnelSetup
only, to setup the Training Project for Customer training. Covers training project DB's for MDS, PDMS and related disciplines. PD Contact PD Product Manager PD Team Lead

TM-3415 AVEVA PID (12.1) Admin Training

Admin Guide
TM-3401 AVEVA PID (12.1) Admin (PP)
TM-3445 AVEVA PID (12.1) Training
User Guide TM-3423 AVEVA PID (12.1) Day1 Session1 (PP)
TM-3431 AVEVA PID (12.1) Day2 Session1 (PP)
TM-3460 TM-3460 AVEVA PID (12.1) Reports Training
TM-3461 AVEVA PID (12.1) PID Rep 1 (PP)
Unintelligent Drawing TBC AVEVA PID (12.1) Unintelligent Upgrade Training
Upgrade Guide TBC AVEVA PID (12.1) Unintelligent Upgrade Training (PP)
TM-3501 AVEVA Diagrams Plant (12.1) Cable Diagrams
TM-3502 AVEVA Diagrams Plant (12.1) P&ID Designer
AVEVA Schematics and Engineering

TM-3503 AVEVA Diagrams Plant (12.1) HVAC Diagrams

TM-3504 AVEVA Diagrams Plant (12.1) Administration
AVEVA Diagrams
TM-3521 AVEVA Diagrams Marine (12.1) Cable Diagrams
TM-3522 AVEVA Diagrams Marine (12.1) P&ID Designer
TM-3523 AVEVA Diagrams Marine (12.1) HVAC Diagrams
TM-3524 AVEVA Diagrams Marine (12.1) Administration
TM-3541 AVEVA Plant (12.1) Schematic Model Manager
Schematic
TM-3541 AVEVA Plant (12.1) Schematic Model Manager
Model Manager
TM-3542 AVEVA Plant (12.1) Schematic Model Manager , Admin
TM-3561 AVEVA Plant(12.1) Schematic 3D Integrator
Schematic 3D
TM-3562 AVEVA Marine (12.1) Schematic 3D Integrator
Integrator
TM-3563 AVEVA Plant (12.1) Schematic-3D-Integrator (Administration)
Schematic Gateways TM-3570 AVEVA (12.1) Schematic Gateway for Smart Plant P&ID
TM-3550 AVEVA Plant (12.1) Engineering TAG module (Basic)
Schematic TAGS TM-3551 AVEVA Plant (12.1) Engineering TAG module (Advanced)
TM-3552 AVEVA Plant (12.1) Engineering administration
TM-6101 AVEVA Instrumentation Project Administrator
TM-6102 AVEVA Instrumentation Engineer
AVEVA Instrumentation
TM-6103 AVEVA Instrumentation Wiring Manager
TM-6104 AVEVA Instrumentation Designer
TM-6501 AVEVA Electrical Project Administrator
TM-6502 AVEVA Electrical Engineer
AVEVA Electrical
TM-6503 AVEVA Electrical Wiring Manager
TM-6504 AVEVA Electrical Designer

TM-2000 Initial Design Introduction & Project Set-up

TM-2001 Surface
(Initial Design)
AVEVA Marine

TM-2002 Compartment
TM-2003 Lines (Design)
INITIAL DESIGN TM-2004 Lines (Production)
TM-2005 Hydrostatics
TM-2006 Probabalistic Stability
TM-2007 Hydrodymanics
TM-2008 Surface Manager

TM-2101 Hull Structural Design

TM-2102 Hull Detailed Design - Planar Hull Modelling
TM-2103 Hull Detailed Design - Curved Hull Modelling (Combined)
AVEVA Marine

TM-2106 Hull Detailed Design - Hull Production Information

DISCIPLINE
TM-2107 Hull Detailed Design - Plate Nesting
(Hull)

TM-2109 Space Management

TM-2110 Common Reference Model
TM-2141 FEM
ADMINISTRATION TM-2122 Project Administration (Hull)
TM-2130 Vitesse Basic / Data Extraction
SPECIALIST
TM-2131 Vitesse Hull / Advanced

BASIC TM-2100 Marine Drafting

TM-2108 Assembly Planning & Hull Weld Planning
TM-2132 Migration
TM-2203 Review
TM-2204 Reporting
AVEVA Marine
(Common)

TM-2239 Clash Manager

TM-2262 Global
ADMINISTRATION TM-2120 System Administration (Basic)
TM-2121 System Administration (Advanced)
TM-2123 Marine Drafting Administration
TM-2254 Clash Manager Administration
SPECIALIST TM-2263 Programmable Macro Language (Basic)
TM-2264 Programmable Macro Language (Advanced)
TM-2268 .NET Custimisation
 APPLEGARTH

STOCKFISCH
DOAN-TRINH
ALEXANDRE

WECHSELER
TOURANIAN

ROUSSEAU
SHASHANK
BROWNLIE
KIZILOCAK

BURROWS
ZALEWSKI

SOMAYEH
JONSSON

ANTHONY
HORRELL

KENNETH

PHAM THI
GUSTAVO
STEPHEN
TOOTELL

NICOLAS
ROWLES

MORTON

ROWLES
SHARDA

BUHREN
CUERVO
KERNEN

WRIGHT

SELCAN
MACIEJ

TINGLE
ZGUR

UYEME
WAYNE

HENRY

JOERG
JAMES

GLYNN
PAGET

STEVE

CHRIS
KEVIN

DAVID

BUCK

BEDIN
BRYN

JOHN

GERT
STAN

JOEL
NICK

IGBE
ALF
IAN
This manual
TM-0001
is for AVEVA Training
personnelSetup
only, to setup the Training Project for Customer training. Covers training project DB's for MDS, PDMS and related disciplines. PD Contact PD Product Manager PD Team Lead

TM-2201 AVEVA Outfitting Foundations

BASIC
TM-2202 Outfit Drawing Production (Basic)
TM-2220 Pipework Modelling
TM-2221 Outfit Structural Modelling
TM-2222 Cable Tray
TM-2223 Heating, Ventilation & Air Conditioning Modelling
DISCIPLINES
TM-2225 Cable Design
TM-2227 Room Design
TM-2228 Iso ADP (Cable Tray / HVAC)
TM-2229 Pipe Fabrication
TM-2230 Outfit Drawing Production (Advanced)
TM-2231 Router
AVEVA Marine

TM-2232 Spooler
(Outfitting)

TM-2234 Multi Discipline Supports

TM-2235 Piping Catalogues & Specifications
ADVANCED TM-2236 Cabling and Cable Tray Cats & Specs
TM-2237 Structural Catalogues & Specifications
TM-2238 Equipment Design (Advanced)
TM-2240 Room Design Catalogue and Specifications
TM-2241 AVEVA Outfitting Supports
TM-2242 Equipment Seat Application
TM-2252 Project Administration (Outfit)
TM-2253 Outfit Project Drawing Administration
ADMINISTRATION
TM-2255 Multi Discipline Supports Administration
TM-2256 AVEVA Outfitting Supports Administration
SPECIALIST TM-2261 Structural Design Templates
TM-2270 Pipe Stress Interface (Admin)
INTERFACES TM-2271 Pipe Stress Interface (User) (Caesar II 5.1)
Laser Model Interface

Training Setup TM-0001 Training Setup

BASIC TM-1000 AVEVA PDMS Hands-On Overview
TM-1001 AVEVA PDMS Foundations
TM-1002 Drawing Production (Basic)
TM-1003 Design Utilities
TM-1004 Reporting
DISCIPLINE TM-1100 Pipework Modelling
TM-1101 Structural Modelling
TM-1102 Cable Tray Modelling
TM-1103 Heating, Ventilation & Air Conditioning Modelling
TM-1104 Equipment Modelling
TM-1105 Electrical & Instrumentation Equipment Modelling
TM-1106 Cable Design
TM-1108 Building Applications
TM-1109 Walls and Floors Miodelling
ADVANCED TM-1200 Equipment Design Templates
TM-1202 Piping Catalogues & Specifications
TM-1203 Structural Catalogues & Specifications
TM-1204 Cabling and Cable Tray Cats & Specs
TM-1205 Structural Design Templates
TM-1206 Drawing Production (Advanced)
TM-1207 Pipe Router
TM-1208 Spooler
AVEVA Plant

TM-1209 Area Based Automatic Drawing Production

TM-1210 Multi-Discipline Supports
TM-1212 HVAC - Cableway Isometric Automatic Drawing Production
TM-1220 Model Object Manager
TM-1221 Clash Manager
ADMINISTRATION TM-1300 System Administration (Basic)
TM-1301 System Administration (Advanced)
TM-1302 Project Drawing Administration
TM-1303 Project Design General Administration
TM-1304 Multi-Discipline Supports Administration
TM-1305 Area Based Automatic Drawing Production (Administration)
TM-1307 Building Applications Administration
TM-1308 Lexicon
TM-1309 Piping Design Administration
TM-1310 HVAC Design Administration
TM-1321 Clash Manager Administration
SPECIALIST TM-1400 Administering Global Projects
TM-1401 PML Macros & Functions
TM-1402 PML Form Design
TM-1403 PML Applied
TM-1406 .NET Customisation
INTERFACE TM-1500 OpenSteel
TM-1501 Pipe Stress Interface (Admin)
TM-1503 Pipe Stress Interface (User)
TM-1504 AVEVA Laser Modeller (User)
TM-1505 AVEVA Laser Modeller (Admin)
 APPLEGARTH

STOCKFISCH
DOAN-TRINH
ALEXANDRE

WECHSELER
TOURANIAN

ROUSSEAU
SHASHANK
BROWNLIE
KIZILOCAK

BURROWS
ZALEWSKI

SOMAYEH
JONSSON

ANTHONY
HORRELL

KENNETH

PHAM THI
GUSTAVO
STEPHEN
TOOTELL

NICOLAS
ROWLES

MORTON

ROWLES
SHARDA

BUHREN
CUERVO
KERNEN

WRIGHT

SELCAN
MACIEJ

TINGLE
ZGUR

UYEME
WAYNE

HENRY

JOERG
JAMES

GLYNN
PAGET

STEVE

CHRIS
KEVIN

DAVID

BUCK

BEDIN
BRYN

JOHN

GERT
STAN

JOEL
NICK

IGBE
ALF
IAN
This manual
TM-0001
is for AVEVA Training
personnelSetup
only, to setup the Training Project for Customer training. Covers training project DB's for MDS, PDMS and related disciplines. PD Contact PD Product Manager PD Team Lead

Training Setup TM-1800 AVEVA Everything3D Training Setup

TM-1801 AVEVA Everything3D Foundations
Basics TM-1802 AVEVA Everything3D Model Utilities
TM-1803 AVEVA Everything3D Reporting
TM-1810 AVEVA Everything3D Pipework Modelling
TM-1811 AVEVA Everything3D Equipment Modelling
TM-1812 AVEVA Everything3D Structural Modelling
TM-1813 AVEVA Everything3D Stairs, Ladders & Handrail Modelling
TM-1814 AVEVA Everything3D Walls & Floors Modelling
Modelling TM-1815 AVEVA Everything3D Cableway & Cable Modelling
TM-1816 AVEVA Everything3D Cable Tray Modelling
TM-1817 AVEVA Everything3D Heating, Ventilation & Air Conditioning Modelling
TM-1818 AVEVA Everything3D Multi-Discipline Supports
TM-1819 AVEVA Everything3D Electrical & Instrumentation Equipment Modelling
TM-1821 AVEVA Everything3D Using Laser Models
TM-1830 AVEVA Everything3D Draw
Drawing Production TM-1831 AVEVA Everything3D Automatic Drawing Production
TM-1832 AVEVA Everything3D Area Based Automatic Drawing Production
TM-1840 AVEVA Catalogue Piping Catalogues & Specifications
Catalogues &
TM-1841 AVEVA Catalogue Structural Catalogues & Specifications
Specifications
AVEVA Everything 3D

TM-1842 AVEVA Catalogue Cable Catalogues & Specifications

TM-1850 AVEVA Everything3D Pipe Router
TM-1851 AVEVA Everything3D Spooler
TM-1852 AVEVA Everything3D Equipment Design Templates
Tools
TM-1853 AVEVA Everything3D Structural Design Templates
TM-1854 AVEVA Everything3D Clash Manager
TM-1855 AVEVA Everything3D Schematics 3D Integrator
TM-1860 AVEVA Administration System Administration (Basic)
TM-1861 AVEVA Administration System Administration (Advanced)
TM-1862 AVEVA Administration Lexicon
TM-1863 AVEVA Global Administering Global Projects
TM-1864 AVEVA Everything3D Stairs, Ladders & Handrail Administration
TM-1865 AVEVA Everything3D Multi-Discipline Supports Administration
TM-1867 AVEVA Everything3D Project Modelling General Administration
Administration TM-1868 AVEVA Everything3D Pipe Modelling Administration
TM-1869 AVEVA Everything3D HVAC Modelling Administration
TM-1870 AVEVA Everything3D Draw Administration
TM-1871 AVEVA Everything3D Automatic Drawing Production Administration
TM-1872 AVEVA Everything3D Area Based Automatic Drawing Production Administration
TM-1873 AVEVA Everything3D Isodraft Administration
TM-1874 AVEVA Everything3D Clash Manager Administration
TM-1875 AVEVA Everything3D Schematics 3D Integrator Administration
TM-1880 AVEVA Everything3D PML Macros & Functions
TM-1881 AVEVA Everything3D PML Form Design
Programming
TM-1882 AVEVA Everything3D PML Applied
TM-1883 AVEVA Everything3D .NET Customisation
SDNF TM-1890 AVEVA Everything3D SDNF Interface
 AVEVA Plant (12 Series) Training Modules and Guides
ISSUED

Module and Training Guide Duration Replacing Existing

Module ID Module Training Guide Content Summary Pre-requisites Target Personnel
Title (Days) Training Modules
This manual is for AVEVA personnel only, to setup the
Training Project for Customer training. Covers training
project DB's for MDS, PDMS and related disciplines. For AVEVA Personnel only, when
TM-0001 Training Setup 0 NONE NONE
conducting Training for Customers.

Hand on PDMS Appreciation, covering from PDMS

Management
AVEVA PDMS Hands-On Database Structure, worked examples of various Design
TM-1000 2 None Project Leaders M2
Overview disciplines, simple Catalogue creatin, through to Drawing
Production
AVEVA PDMS Fundamentals, User Interface Basics,
Displaying Model Elements, Working with 3D Views,
General Utilities, Attributes, Positioning and Orientation,
Introduction to Model Editor, Basic Equipment Modelling, Knowledge of Windows XP, Keyboard
TM-1001 AVEVA PDMS Foundations 3 All Designers and Engineers M3, M4
Equipment Modelling Using Templates, Equipment Skills
Utilities, Volume Modelling

Draft Hierarchy, View Creation, 3D View, Dimensioning,

TM-1002 Drawing Production (Basic) 2 AVEVA PDMS Foundations All Designers and Engineers M10
Labelling, 2D Draughting, Flat Section Planes

Clash Detection, Quick Reports, Reporter using templates,

TM-1003 Design Utilities Surface treatment reports, Mass properties & CofG, AVEVA PDMS Foundations All Designers and Engineers M11, M12
Status Control, Representation rules (Design)

Pipework Modelling, Pipe Routing, Replacing

Components, Data Consistency Checker, Clash Detection,
Hole Management, Isometric Production, Sloping/Falling
TM-1100 Pipework Modelling Pipelines, Alternative Posistioning forms, Pipe Assemblies, 2 AVEVA PDMS Foundations Piping Designers M5, M11, M13
Pipe Splitting, Pipe Editing (re-bore/re-spec), Pipe
Fabrication Machine. Production Checks, Flange
enhancements

Setting-up the Database hierarchy for Structures, Beams

& Columns, Modifying Structural Sections, Beam &
TM-1101 Structural Modelling (Basic) Column Utilities, Regular Structures, Section Fittings and 2 AVEVA PDMS Foundations Structural Designers M6
Joints, Panels & Plates, Negative Extrusions and Panel
Fittings, Material assignment (Weights, CofG calculations)

Cable Tray Modelling Concepts, Creation of Cable Tray

TM-1102 Cable Tray Modelling branches, In-line Components, Model Editor for Cable 2 AVEVA PDMS Foundations E&I Designers M9
Tray, Reporting for Cable Tray, Data consistency checks

HVAC Design Features, Getting Started, Learning about

the PDMS HVAC database hierarchy, Routing a sequence
Heating, Ventilation & Air of HVAC components, Adding to the HVAC model, HVAC
TM-1103 2 AVEVA PDMS Foundations HVAC Designers M8
Conditioning Modelling Splitting, Completing the Design, Hole Management,
Checking and Outputting Design Data, HVAC Systems,
HVAC Spooling, HVAC Sketches

TM-1104

Cableway Modelling, Route Attachment Points, Cableway

Route node Points, Cableway Qucik Router, Splitting
TM-1105 Cableway & Cabling Design Cableways. 2 AVEVA PDMS Foundations E&I Designers N/A
Cable Tray Material, Cableway / Tray Penetrations
Cable routing, Cable Import, Cable Data Utility

Modelling and Managing Electrical and Instrument items.

TM-1106 E & I Modelling Non parametric templates creation, modification, linking 1 AVEVA PDMS Foundations E&I Designers
3D objects to documents

TM-1107 AVEVA Diagrams (Pipe) Contact John Reynard for further details
TM-1108 AVEVA Diagram (HVAC) Contact John Reynard for further details

Data Structure in Nuclear Concrete Design, Floor and Wall

Hierarchy and Elements creation, Create / Modify Floor
Nuclear Concrete Design
TM-1109 and Walls. Use contour editior for points modifications, 2 AVEVA PDMS Foundations Structural Designers N/A
PDMS 11.6 Version
Creation / Modification of Beams, Colums, Ladders,
Concrete Stairs, Steel Stairs, Spiral Stairs

Overview of Nuclear Room Manager, Room Volume

Nuclear Room Manager
TM-1110 definition and creation, Room inventory, Utilities, eg Flood 2 AVEVA PDMS Foundations Structural Designers N/A
PDMS 11.6 Version
Water sumulation, Paint Area calculations, etc

TM-1111 Room Design (Not available in Plant) N/A

TM-1112 ASL HOLD N/A

 Data structure and hierarchy. Create/modify beams,
Structural modelling (basic) or an
columns, walls, floors, sub-components, handrail, stairs,
TM-1113 Nuclear Application 4 understanding of the Walls & Floors Structural Designers N/A
and ladders. Create/modify room volumes, flooding and
application.
inventory reports. Create/modify quantity reports.
 Product installation, configuration and set up
Basic understanding of PDMS system
requirements. Parameter files, catalogue and specification
TM-1114 Nuclear Application Admin administration and Nuclear Applications Administrators N/A
requirements (this does not include detailed Cats & Specs
utilities.
for Nuclear items).

Equipment Templates (Parametrised & Non-

Advanced Pipework or E&I
TM-1200 Equipment Design (Advanced) parameterised), Selection Tables, Equipment 2 Any Discipline Modelling Course M19
Designers
Associtaions, Hole Management for Equipment.

3D Aid Constructs & Working Planes, Curved Profiles,

TM-1201 Structural Modelling (Advanced) 2 Structural Modelling (Basic) Advanced Structural Designers M18
Hole Management

What Paragon Does, The Catalogue Database Structure,

Paragon - General Application, Component Creation,
Constructing Pointsets, Creation of Geometry Sets,
Creating Text Elements, Component Part Families, Coding
Designated Cats & Specs
Piping Catalogues & Systems, Connection Compatibility Tables, Pipe
TM-1202 5 Pipework Modelling personnel with Piping Design M22
Specifications Speifications, Component Insulation and Specification,
background.
Design Parameters, Nozzle Specifications, Bolting,
Datasets, Attachment points, Properties, Spooling,
Component Item Codes, Catalogue Database
Consistency, Administration,

General Pinciples, Structural Profiles, Design Parameters Designated Cats & Specs
Structural Catalogues &
TM-1203 and Non-Prismatic Profiles, Section Fittings, Panel 5 Structural Modelling (Advanced) personnel with Structural Design M23
Specifications
Fittings, Joints background.
Cabling Catalogue and TBC at Designated Cats & Specs
TM-1204 TBC Electrical & Instruments Modelling N/A
Specifications 12.0.SP2 personnel with E & I background.
Template Hierarchy, Basic Referencing, Property
Relationships, Initial Modelling, Capturing the Elements,
TM-1205 Structural Design Templates Adding Properties, Data Ranges & Valid Values, 5 Structural Cats & Specs Advanced Structural Designers M32
Parametrisation, Design Points, Local Names, Repeat
Elements
3D View, Autotagging, Change Highlighting, General ADP,
TM-1206 Drawing Production (Advanced) 2 Drawing Production (Basic) All Designers and Engineers M20
Symbolic Representation
Basic Routing, Positioning and Locking Components,
Creating and Uaing Routing Points, Routing Planes,
TM-1207 Pipe Router 1 Pipework Modelling Piping Designers M16
Creating and Using Pipe Rack, Pipe Packing, Routing
Rules

Controlling Spooler, Preparation for Spooler, Creating a

TM-1208 Pipe Spooler Spool Drawing, Spooling Piping Network, Advanced 1 Pipework Modelling Piping Designers M17
Spooler Features, Outputting Spool Drawings

Basic Components of an ABA Drawing, Remplates, Areas,

etc
Area Based Automatic Drawing
TM-1209 Creating AB-ADP Drawing, Processing options, Drawing Production (Basic) All Designers and Engineers N/A
Production (User)
Regenerate process, AB-ADP defaults, View Log files,
Setting Drawing names.

MDS Basic Concepts of a Support, Entering the MDS

Application, MDS Defaults, Multi Discipline Support,
Modification of a Support, Deleting a Support, Locking a
Support, Cable Rack Support, HVAC Support, Creation of
a General Support, Trunnion Support, Fixed Hanger,
Variable Hanger, Fixed/Variable Hanger Creation Modes, Pipework Modelling or HVAC Modelling Piping Designers, HVAC Designers
TM-1210 Multi-Discipline Supports 2 M15
Special Supports, Support Groups, Lighting Supports, or E&I Modelling and E&I Designers
Vessel Supports, Branch Reinforcement, Preliminary
Supports, Copying a Support, Modifying a Support Name,
MDS Wizard, MDS Helath Check Utility, MDS Reports,
Miscellaneous Utilities, MDS Drawing Production, MDS
Manuals & Help

TM-1211 P & ID Integrator Contact John Reynard for further details

MOM concepts,Controlling 2D & 3D objects, Building AVEVA PDMS Foundations, Pipework

TM-1220 Model Object Manager 1 All Designers and Engineers M40
contolled Pipes, Equipments and Instruments Modelling and E&I Modelling.

Clash Manager concepts,Creating & Executing Clash

TM-1221 Clash Manager 1 AVEVA PDMS Foundations All Designers and Engineers M41
Sets, Approval of Clashes, Clash Groups, Clash Reports

Controlling deliverables such as isometrics, equipment

Model Object Manager, AVEVA PDMS
drawings and pipe support details depending upon Piping and Equipment Designers
TM-1222 Deliverable Manager 1 Foundations, Pipework and Equipment M42
attribute values.Produce and detail the drawings,Adding and Engineers
Modelling.
notes and stickers to Drawings
P&ID to 3D graphical comparison of equipment, nozzle,
line and piping/instrument component data between
AVEVA PDMS Foundations, Pipework Piping and Equipment Designers
TM-1223 Connectivity Manager AVEVA PE P&IDs and PDMS models.Connectivity 1 M43
Modelling and E&I Modelling. and Engineers
reports,Building of Pipe, Equipment and inline
components
 Drawing Production and good AutoCAD
TM-1230 Final Designer Not Available for PDMS12.SP2.1 Yet 2 Drawing Production Personnel M44
knowledge

Project Access, Creating a New Project, Teams and Users,

Password security, Creating Databases, Foreign
Databases, MDBs,Testing AVEVA Plant Access,
Reference Between Databases, NT Authentication,
TM-1300 System Administration (Basic) 2 Any Discipline Course System Adminstrators M25, M35
Sharing Projects and Files, Multiwrite Databases, Project
Administration, Project Setup Excel Import, Environment
Variables, Data Integrity Checking, Reconfigure, Backing
Up Data

Extract Databases, Lexicon, Creating UDA's and UDET's,

System Administration
TM-1301 Data Access Control, PML Encryption, IPR Database 2 Basic System Administration System Adminstrators M26
(Advanced)
Encryption
Draft Administration, IsoDraft Administration and ADP Project Administrators and System
TM-1302 Project Drawing Administration 3 Drawing Production (Basic) M27, M28, M29
Administration Administrators

HVAC Administration, ASL Administration, Cable

Administration (Future), Systems, Assemblies,
TM-1303 Project Design Administration 2 Any Discipline Course N/A
Association Requirements, Hole Management
Requirements, Pipe Assemblies

MDS Projects and Databases, Project Catalogue

Requirements and minimum DAC, Configuration
Checklist, Accessing NDS Administration Form and
Menus, MDS Admin Form, MDS Ancillary Defaults Form,
Multi-Discipline Supports Designated MDS Administration
TM-1304 MDS Hanger Data Form, Hangers Design Templates, 1 Multi-Discipline Supports M31
Administration Personnel
MDS Lighting Support Defaults, Structure Defaults Form,
Framework Template Administration, MDS Trunnion
Defaults Form, Trunnions, MDS Autonaming, MDS User
Plots, Report Defaults, MDS Drawing production

Basic components of AB-ADP, Templates, Areas, etc.

AB-ADP defaults, Creating classifications, areas, Auto Tag Area Based Automatic Drawing
Area Based Automatic Drawing
TM-1305 rules, Creating tasks, Setting up Templates, Creating 1 Production (User) and Programmable N/A
Production (Administration)
Drawing registry areas, Applying to Keyplans, Building Macro Language (Basic)
Tasks.
Creating of Database instance(Oracle), Installing &
Model Object Manager Configuration of Model Management,Creating UDA's in Model Manager,AVEVA PDMS
TM-1320 1 System Adminstrators M40A
Administration VPE and mapping it across to PDMS, Releasing items in Foundations
VPE, Issuing items for 3D design.
Creating of Database instance(Oracle & SQL), Installing &
Configuration of Clash Manager,Assingning of Clashes to
TM-1321 Clash Manager Administration 1 AVEVA PDMS Foundations System Adminstrators M41A
Disciplines, Setting up of Clash Manager users, Setting up
of automatic assignment rules.
Model Object Manager, AVEVA PDMS
Deliverable Manager
TM-1322 Installation and Configuration of Deliverable Manager 1 Foundations, Pipework and Equipment System Adminstrators M42A
Administration
Modelling.
Creating of Database instance(Oracle), Installing &
Configuration of Model Management, Exporting data from
Connectivity Manager
TM-1323 P&ID to VPE, Releasing items in VPE, Creating UDA's in 1 Connectivity Manager System Adminstrators M43A
Administration
VPE and mapping it across to PDMS,Issuing items for 3D
Design and PCM

TM-1324 AVEVA Schematics 3D Integrator Contact John Reynard for further details 1 Connectivity Manager System Adminstrators M43A

TM-1325 AVEVA Schematics (Admin)

Concepts and Terminology, Setting Up a Global Project,

Satellite Project Structure, Unscheduled Database
Updates, Transaction Database Administration, Databases
in a Global Project, Tseating AVEVA Plant Global Access
TM-1400 Global 1 System Administration System Adminstrators M34
in Design, Global Daemon Service, Extract Databases,
Working with Extract Databases in a Global Project, Data
Access Control in a Global Project, Managing Databases
in a Global Project, Transaction Failures

Programmable Macro Language

TM-1401 TBC 5 Any Discipline course Advanced Designers M33
(Basic)
 Programmable Macro Language
TM-1402 pml.net, creating applications, interaction with PDMS 5 Programmable Macro Language Application Personnel N/A
(Advanced)

TM-1500 OpenSteel TBC 2 Structural Modelling Advanced Structural Designers M24

Project Installation and configuration, Catalogue and
TM-1501 Pipe Stress Interface (Admin) Design UDA settings, PSI interface settings, Expressions, 1 Pipework Modelling Pipe Stress Engineers M30
Restraint settings
PSI Interface, Creation / Display of Stress Groups,,
Rebuild Stress groups, Animation, Stress group nodes,
Pipe Stress Interface (User) attributes, Checking of Stress groups, PDMS to CAESAR
TM-1502 II, Transfer and stressing network, Reports, CAESAR II to 1 Pipework Modelling Pipe Stress Engineers M30
(Caesar II 5.1)
PDMS, Add Pipe Supports & Anchors.

Laser Model Interface (vendor

Vendor dependant 1 Any Discipline Course Advanced Designers M38
specific)
User Interface changes, multi drawlists, 3D views, Design All Designers and Engineers
explorers, Plant Grid systems, Groups, search, Command All Support / Administrators
TM-1900 PDMS Foundations and Design Utilline window, Surface Treatment, Mass properties, Status PDMS11.6 Knowledge
Control, Representation rules in Design

New equipment primitive creation forms, import equipmet All Designers and Engineers
TM-1901 Equipment Modelling Upgrade tags, Design Templates, Volume Modelling, Equipment PDMS11.6 Knowledge All Support / Administrators
Associations, Hole Management, Selection tables

Pipe Splitting, Re-spec and Re-bore, Pipe assemblies, All Designers and Engineers
Pipe Fabrication Machine, Production checks, New Piping All Support / Administrators
TM-1902 Pipework Modelling Upgrade component attributes, Flange enhancements, Pipe PDMS11.6 Knowledge
penetrations, Hole Management

Enhanced Mitring , Enhanced Split functionality, Profile All Designers and Engineers

2 to 3 days
TM-1903 Structural Modelling Upgrade Filleting, Mass properties (Weights, CofG), Hole PDMS11.6 Knowledge All Support / Administrators
Management

Combined Paragon, Specon, Propcon, New database All Designers and Engineers
elements (Part families and Selection Tables), New All Support / Administrators
TM-1904 Piping Cats & Specs Upgrade interface, Gparts, Branch tables, Bolting, Flange offsets, PDMS11.6 Knowledge
Mitre / Pulled bends, Surface treatment

Database evolution, System limits, project wizard, excel All Designers and Engineers
TM-1905 System Admin Upgrade import, PML publisher, IPR database protection, Password PDMS11.6 Knowledge All Support / Administrators
security, NT Authentication
Unbundling of colours from pens, true type fomts, All Designers and Engineers
TM-1906 Drawing Production Upgrade PDMS11.6 Knowledge
improved printing, 2D symbology, project upgrading All Support / Administrators
Not Available for PDMS12.0.SP5 (Same as 12.0.SP4) All Designers and Engineers
TM-1907 PML Upgrade PDMS11.6 Knowledge
All Support / Administrators
 AVEVA Marine (12 Series) Common Training Modules and Guides

Upgrade Training
Module Group Module ID Module and Training Guide Title Module Training Guide Content Duration (Days) Pre-requisites Target Personnel Comments Module Upgrade Content
Duration (Days)

Introduction to AVEVA Marine Hull Concept, Knowledge of Windows XP, All Designers and Intended as an introduction and foundation for All New
TM-2100 Marine Drafting 2 0.5
overview of user interface and basic functionality Keyboard Skills Engineers Users before taking other courses.

Steelwork Designers
Assembly Planning & Hull Weld All Assembly Planning & Weld Planning
TM-2108 1 None Outfit Designers 0.5
Planning Functionality
Planning Engineer

Project Migration fromTribon M3 series to AVEVA System Administration, basic and

TM-2132 Migration System Administrators N/A
Marine 12.1 Advanced

Knowledge of Windows XP, All Designers and Documentation supplied with Review is adequate for
TM-2203 Review N/A N/A
Keyboard Skills Engineers Training
BASIC

All Designers and

TM-2204 Reporting 2 AVEVA Hull / Outfitting N/A
Engineers

TM-2239 Clash Manager Any Discipline Course N/A

Concepts and Terminology, Setting Up a Global

Project, Satellite Project Structure, Unscheduled
Database Updates, Transaction Database
Administration, Databases in a Global Project,
Testing AVEVA Marine Global Access in Design, System Administration, basic and
TM-2262 Global 2 System Administrators N/A
Global Daemon Service, Extract Databases, Advanced
Working with Extract Databases in a Global
Project, Data Access Control in a Global Project,
Managing Databases in a Global Project,
Transaction Failures

System Set-up, Project Set-up (including outfit),

TM-2120 System Administration (Basic) 2 None System Administrators N/A
Common System Tasks, DACS, Lexicon
ADMINISTRATION

Extract Databases, Data Access Control, PML

TM-2121 System Administration (Advanced) 2 System Administration (Basic) System Administrators N/A
encryption, IPR Data Base Encrption.

TM-2123 Marine Drafting Administration 2 Marine Drafting Draft Administration

TM-2254 Clash Manager Administration TBC Clash Manager System Adminstrators M41A N/A TBC
 AVEVA Bocad Training Modules and Guides
ISSUED

Module and Training Guide Duration Replacing Existing

Module ID Module Training Guide Content Summary Pre-requisites Target Personnel
Title (Days) Training Modules

Understand basic concepts of AVEVA Bocad. Setup new

projects. Understand the grid concept of AVEVA Bocad.
Use and create different types of views. Understand and
TM-7001 AVEVA Bocad Basics 1 use different point types in the design process. Create and 5 None Structural detailers and engineers
edit member within the model in different ways. Create
and edit outline plates. Create welded and bolted
connections.

Create advanced member types such as curved members

and flashings. Understand and use advanced construction
concepts such as copy and mirror, detailing members with
help of the detailing box, sharing construction elements
TM-7002 AVEVA Bocad Basics 2 (Steel) 5 TM-7001 Structural detailers and engineers
between projects via libraries. Work with pre-defined steel
construction connections. Understand and use advanced
functions of AVEVA Bocad, especially the marking, parts
lists and the drawing production.

Understand general handling concepts of AVEVA Bocad

TM-7003 AVEVA Bocad NC NC. Create common editing processes for parts within 1 None Structural detailers
AVEVA Bocad NC.

AVEVA Bocad Fundamentals, User Interface Basics,

Intended as an introduction and foundation for All New Users before
TM-7101 AVEVA Bocad Basics General Utilities, Create objects, Modify objects, Create 2 None
taking other courses.
connections, Move-, Copy-, Mirror objects, exercises

Marking, Automatic drawings, Drawing lists, Nested

TM-7102 AVEVA Bocad Deliverables 1 TM-7201 or TM-7301 or TM-7401 Structural detailers and engineers
drawings, Bills of material, Interfaces, BoView

Advanced marking, Marking status, Revision Nr, Revision

TM-7103 AVEVA Bocad Advanced Utilities list, update drawing, Automatic nesting, Special profiles, 2 TM-7101 and TM-7102 Structural detailers and engineers
shared work, Interfaces

TM-7104 AVEVA Bocad Customisation Letterboxes, Bills of Material, Bolts, Profiles, BoView 1 TM-7102 Structural detailers and engineers

Understand basic concepts of AVEVA Bocad, Import a

Especially for PDMS and Everything3D users to get an overview of the
TM-7200 Evalution (Onshore) steel structure from Everything3D, Complete this model, 3 None
product but also for any user who wants to discover Bocad-3D
Export the steel structure to Everything3D

Creation of joints - interactive/ by using macros,

TM-7201 Detailing (Onshore) Advanced member/connection, Checking tools, 3D Library, 2 TM-7101 Structural detailers and engineers
Exercises

TM-7202 Specialisation (Onshore) Basics in: Stairs&Rails, Cladding, Boedit 2 TM-7103 Structural detailers and engineers
 TM-7201
TM-7102 TM-7301 TM-7101 ID
TM-7401
Module

Block 2 -
Block 1 - BASICS
Block 3 - DETAILING
Common to all modules
Deliverables Specifc for
Different by specifc model
each
Daymodule
3&4
Tips &Tricks for
Day 2 Day 1
effective
One Week

Day 5 - Output Rebuilding the Exploring an

detailing
sample model existing model
(with
repetitions)

C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C

SP
SP
SP
SP
SP
SP
SP

-
-

C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C

SP
SP
SP
SP
SP
SP

-
-

C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C

SP
SP
SP
SP
SP
SP
OnshoreOffshore Tower
Basic Training C = Common / SP = Specific / - = N/A
Specific / - = N/A
Description
Zoom, main views, additional views
Fonts & Colors
Iconbars
Modifying the representation of objects in views
Object properties and information about coherencies of connections
Editing object properties including Search/Filter
Save/Load model + automatic save
Usage of Pick-Modes
Grid and grid-modification
Phases + Member Colors
Creation and editing of profiles
Creating Pick-Points
Creation and editing of outline-plates
Creation and editing of bolts and welds
Move/Copy/Mirror objects
Generation of plates -> similarity Profile vs. Outline-Plate
Difference between Assembly, Single Member, Main- and Secondary Member
Stretchen/Shorten to make main changes in completed construction
Small excursion in automatic drawings (for motivation)
Combining views, points and members effectively
(exercises stiffener, beams, end-plates, head-plates and bottom-plates)
Using joint-macros
Checking tools (member/bolt clashing e.g.)
2D-Flashings, Gratings
3D-Flashings
Slotted holes
3D Library
Marking
Interactive Drawings (nested drawing)
Interactive list for GA-drawings
Automatic Drawings
BoPrint
BoView/BoMat
Interfaces?
Keep some free time for special purpose
 TM-7202
TM-7302 TM-7104 TM-7103 ID
TM-7402

Block 3 - Block 2 -
Block 1 - Advanced
Specialisati Customisatio
Utilities
on n
Day 3
Day 4 & 5
Customisatio
Macros & Day 1 & 2
One Week

n
Specifc Advanced Utilities
(common
Tools
examples)

-
-
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C

SP
SP

-
-
-
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C

SP
-
-
-
-
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C

SP
SP
OnshoreOffshore Tower
ModuleAdvanced TrainingC = Common / SP = Specific / - = N/A
Specific / - = N/A
Description
Advanced Marking
Revision Nr
Marking Status
Revision List
Update Drawings
Cladding Classification
Automatic Nesting
Special Profiles
Import/Export vs. Shared Work
Interfaces (NC/DSTV, VRML, ABSI, DWG/DXF, Mechanicad, IFC)
Automatic Drawings Setup
Catalogue Profiles
Database Profiles, Bolts
Titleblock Carcli
Frame
Clientdata
Project Management
Stairs&Rails Basics
Cladding Basics
BoEdit Basics
Offshore Output Tools & Macros
Specific Macros
Table