Scribd
Upload
66 views

Coding

This sketch uses a PIR sensor to detect motion. When motion is detected, it buzzes a buzzer, lights an LED, and sends an SMS alert message to a phone number. It includes functions to play a tone on a pin connected to a speaker, and to send SMS messages using a GSM shield.

Uploaded by

Ami TeemO
Copyright
© © All Rights Reserved
Available Formats
Download as TXT, PDF, TXT or read online on Scribd
66 views

Coding

This sketch uses a PIR sensor to detect motion. When motion is detected, it buzzes a buzzer, lights an LED, and sends an SMS alert message to a phone number. It includes functions to play a tone on a pin connected to a speaker, and to send SMS messages using a GSM shield.

Uploaded by

Ami TeemO
Copyright
© © All Rights Reserved
Available Formats
Download as TXT, PDF, TXT or read online on Scribd
You are on page 1/ 3

// Uses a PIR sensor to detect movement, buzzes a buzzer, And LED

// Creator Md. Jubayer Rahman


// If Need Help Contact : [email protected]
// Date : 13.04.2014

#include <GSM.h>
#define PINNUMBER ""

// initialize the library instance


// include a 'true' parameter for debug enabled
GSM gsmAccess;
GSM_SMS sms;

// char array of the telephone number to send SMS


// change the number 1-212-555-1212 to a number
// you have access to
char remoteNumber[20]= "01818826205";

// char array of the message


char txtMsg[200]="Alarm! Alarm! You Have An Intruder";

int ledPin = 8; // choose the pin for the LED


int inputPin = 6; // choose the input pin (for PIR sensor)
int pirState = LOW; // we start, assuming no motion detected
int val = 0; // variable for reading the pin status
int pinSpeaker = 4; //Set up a speaker on a PWM pin (digital 9, 10, or
11)

void setup() {
pinMode(ledPin, OUTPUT); // declare LED as output
pinMode(inputPin, INPUT); // declare sensor as input
pinMode(pinSpeaker, OUTPUT);
Serial.begin(9600);

Serial.println("Motion detected!");

Serial.println("SMS Messages Sender");

// connection state
boolean notConnected = true;

// Start GSM shield


// If your SIM has PIN, pass it as a parameter of begin() in quotes
while(notConnected)
{
if(gsmAccess.begin(PINNUMBER)==GSM_READY)
notConnected = false;
else
{
Serial.println("Not connected");
delay(1000);
}
}
Serial.println("GSM initialized");
}

void loop(){
val = digitalRead(inputPin); // read input value
if (val == HIGH) { // check if the input is HIGH
digitalWrite(ledPin, HIGH); // turn LED ON
playTone(300, 160);
delay(150);

if (pirState == LOW) {
// we have just turned on

sendSMS();

// We only want to print on the output change, not state


pirState = HIGH;
}
}

else {
digitalWrite(ledPin, LOW); // turn LED OFF
playTone(0, 0);
delay(300);

if (pirState == HIGH){
// we have just turned of
Serial.println("Motion ended!");
// We only want to print on the output change, not state
pirState = LOW;
}
}

// duration in mSecs, frequency in hertz


void playTone(long duration, int freq) {
duration *= 1000;
int period = (1.0 / freq) * 1000000;
long elapsed_time = 0;
while (elapsed_time < duration) {
digitalWrite(pinSpeaker,HIGH);
delayMicroseconds(period / 2);
digitalWrite(pinSpeaker, LOW);
delayMicroseconds(period / 2);
elapsed_time += (period);
}
}

// SMS Code
void sendSMS(){

Serial.print("Message to mobile number: ");


Serial.println(remoteNumber);

// sms text
Serial.println("SENDING");
Serial.println();
Serial.println("Message:");
Serial.println(txtMsg);

// send the message


sms.beginSMS(remoteNumber);
sms.print(txtMsg);
sms.endSMS();
Serial.println("\nCOMPLETE!\n");
}

You might also like