PUTT PRO Instruction
PUTT PRO Instruction
Now that you have assembled your Putt Pro, it is time for you to reap the benets of your product.
The product can be used indoors as well as out doors and the instructions remain the
same.
1. Place the product on the indoor surface or the putting green where you wish to
practice.
2. Stand behind the product and by using the alignment aids (Stroke Direction
Indicators) ensure that the aid is aligned correctly.
3. Take your putter and roll the ball into the ball placement guide and ensure the ball is
in the correct position.
4. Place your putter underneath the Alignment Plate with the putter face being visible
from the top through the Putter Face Alignment Window.
5. Turn the Putter until the putter face is parallel to the leading side of the Putter Face
Alignment Window. You will note that the face might feel shut but trust the alignment.
6. Now it is important that you shift you eyesight to the Focus Hole and concentrate on
the ball underneath the hole. It is important to not look at the putter during the stroke
but rather focus on the ball.
7. Depending on the distance required for the stroke, the back stroke should be straight
and on line. It is advised that one starts with puts of 3 feet and gradually increase the
distance during practice
8. As you start using the Pro Putt, it will increase your ability to put on line and read breaks
with a lot more condence. Align he product for less break but a more aggressive stroke
and more break for lag putts.