Scribd Logo
Upload

Welcome to Scribd!

  • 189 views

    How To Reset Fiery Defaults From WebTools

    Uploaded by

    hazim
    1. Print a configuration page to retrieve the DocuColor's networking information like IP address, subnet mask, and gateway address. 2. Launch the WebScan application and navigate to the Configure tab to access the Fiery server settings. 3. Reset the Fiery defaults, reboot the Fiery, and wait 4 minutes for it to restart. Then re-enter the networking information retrieved earlier using the DocuColor touch screen interface. Power cycle the DocuColor to complete the reset process.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd

    How To Reset Fiery Defaults From WebTools

    Uploaded by

    hazim
    189 views5 pages
    1. Print a configuration page to retrieve the DocuColor's networking information like IP address, subnet mask, and gateway address. 2. Launch the WebScan application and navigate to the Configure tab to access the Fiery server settings. 3. Reset the Fiery defaults, reboot the Fiery, and wait 4 minutes for it to restart. Then re-enter the networking information retrieved earlier using the DocuColor touch screen interface. Power cycle the DocuColor to complete the reset process.

    Original Description:

    Fiery

    Original Title

    How to Reset Fiery Defaults From WebTools

    Copyright

    © © All Rights Reserved

    Available Formats

    PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    1. Print a configuration page to retrieve the DocuColor's networking information like IP address, subnet mask, and gateway address. 2. Launch the WebScan application and navigate to the Configure tab to access the Fiery server settings. 3. Reset the Fiery defaults, reboot the Fiery, and wait 4 minutes for it to restart. Then re-enter the networking information retrieved earlier using the DocuColor touch screen interface. Power cycle the DocuColor to complete the reset process.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    189 views5 pages

    How To Reset Fiery Defaults From WebTools

    Uploaded by

    hazim
    1. Print a configuration page to retrieve the DocuColor's networking information like IP address, subnet mask, and gateway address. 2. Launch the WebScan application and navigate to the Configure tab to access the Fiery server settings. 3. Reset the Fiery defaults, reboot the Fiery, and wait 4 minutes for it to restart. Then re-enter the networking information retrieved earlier using the DocuColor touch screen interface. Power cycle the DocuColor to complete the reset process.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    of 5

    DOCUCOLOR 242/252/260: RESETTING FIERY DEFAULTS & REBOOTING SYSTEM

    1. Print a Configuration page at the DocuColor for the networking information 1st:
    Configuration(system settings list) instructions:

    a) Press the [Machine Status] button on the Control Panel.


    b) Select the [Billing Meter / Print Reports] tab on the Touch Screen.
    c) Select the [Print Report / List] button.
    d) Select the [Network Controller Jobs Report] button. The Network Controller Jobs
    Report button will be displayed.
    e) Select the [System Settings List] button.
    f) Press the [Start] button on the Control Panel. The System Settings
    (Configuration) Report will print.
    g) Select the [Close] button on the Touch Screen three times to exit.

    2. Launch Retrieve Scanned Document from Webtop (open your WEBSCAN)

    3. At the WebTools Home click the Configure tab


    4. Click Launch Configure

    5. At the logon window, type Fiery.1 in the


    password box
    6. When the Configure menu loads, click Server on the menu on the left

    7. Select Backup/Restore from the Server menu


    8. Click on the Restore Default Fiery Settings box

    9. Reply OK to Do you want to continue?

    10. When the restore has completed successfully, click OK to reboot the Fiery

    11. Wait for the Fiery to reboot. This will take about 4 minutes.
    12. Using the information from the Configuration report(*SEE BELOW), re-enter the
    networking information through the DocuColor 242/252 User Interface touch screen

    *NETWORK INFORMATION-ON CONFIGURATION SHEET IS FOUND:


    On the front page scroll down until you see NETWORK SETUP, scroll down
    further to Ethernet Setup. You will find IP Address, Subnet Mask and Gateway
    Address. The subnet mask for your store will always be 255.255.255.0 and the
    Gateway will always be the same as your IP except the last octet will be a 1 not
    157. In order to get the period or dots just hit the next key.

     Press the Login/Logout button


     Enter the System Administrator Login ID: 11111
     Click Confirm
     Click System Settings
     Click System Settings
     Use the Down arrow on the bottom of the screen navigate to the Network
    Settings window
     Click Network Controller Settings
     Click Network Settings
     Enter the networking information

    (a) TCP/IP: Get IP Address Select change settings and set to Manual & save
    (b) TCP/IP: IP Address 10.xxx.xxx.157 (a 2nd Full Serve color will be .164)
    (c) TCP/IP: Subnet Mask 255.255.255.0
    (d) TCP/IP: Gateway Address 10.xxx.xxx.1

     Click Close to close the next 3 windows


     Click Exit to logout

    POWER MACHINE OFF..WAIT UNTIL BLUE SERVICES LIGHT GOES OUT AND POWER
    UP
    ***WILL TAKE FIERY (NETWORK SETTINGS) APPROX. 4 MIN TO BOOT UP*********

    You might also like