Scribd Logo
Upload

Welcome to Scribd!

  • 758 views

    Aisi 1030 Steel

    Uploaded by

    Khairul Kai
    AISI 1030 steel is a medium carbon steel that is cold drawn to a round shape between 0.75-1.25 inches. It has moderate strength and hardness in the as-rolled condition and can be strengthened by cold working. It has fair machinability and weldability.

    Copyright:

    © All Rights Reserved
    Download as DOCX, PDF, TXT or read online from Scribd

    Aisi 1030 Steel

    Uploaded by

    Khairul Kai
    758 views2 pages
    AISI 1030 steel is a medium carbon steel that is cold drawn to a round shape between 0.75-1.25 inches. It has moderate strength and hardness in the as-rolled condition and can be strengthened by cold working. It has fair machinability and weldability.

    Original Description:

    type of steel

    Copyright

    © © All Rights Reserved

    Available Formats

    DOCX, PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    AISI 1030 steel is a medium carbon steel that is cold drawn to a round shape between 0.75-1.25 inches. It has moderate strength and hardness in the as-rolled condition and can be strengthened by cold working. It has fair machinability and weldability.

    Copyright:

    © All Rights Reserved
    Download as DOCX, PDF, TXT or read online from Scribd
    Download as docx, pdf, or txt
    758 views2 pages

    Aisi 1030 Steel

    Uploaded by

    Khairul Kai
    AISI 1030 steel is a medium carbon steel that is cold drawn to a round shape between 0.75-1.25 inches. It has moderate strength and hardness in the as-rolled condition and can be strengthened by cold working. It has fair machinability and weldability.

    Copyright:

    © All Rights Reserved
    Download as DOCX, PDF, TXT or read online from Scribd
    Download as docx, pdf, or txt
    You are on page 1of 2

    AISI 1030 Steel, cold drawn, 19-32 mm (0.75-1.

    25 in) round
    Categories: Metal; Ferrous Metal; Carbon Steel; AISI 1000 Series Steel; Medium Carbon Steel
    Material Moderate strength and hardness in the as-rolled condition, can be strengthened and
    Notes: hardened by cold work. Fair machinability and weldability.
    Key Words: ASTM A545, ASTM A546, ASTM A682, DIN 1.1172, FED QQ-S-635 (C1030),
    FED QQ-S-700 (C1030), MIL SPEC MIL-S-11310 (CS1030), SAE J403, SAE
    J412, SAE J414, UNS G10300, ASTM A29, ASTM A108, ASTM A510, ASTM
    A512, ASTM A519, ASTM A544
    Vendors: No vendors are listed for this material. Please click here if you are a supplier and
    would like information on how to add your listing to this material.

    Physical Properties Metric English Comments


    Density 7.85 g/cc 0.284 lb/in

    Mechanical
    Metric English Comments
    Properties
    Hardness, Brinell 149 149
    Hardness, Knoop 169 169 Converted from Brinell
    hardness.
    Hardness, Rockwell B 80 80 Converted from Brinell
    hardness.
    Hardness, Vickers 155 155 Converted from Brinell
    hardness.
    Tensile Strength, 525 MPa 76100 psi
    Ultimate
    Tensile Strength, Yield 440 MPa 63800 psi
    Elongation at Break 12 % 12 % In 50 mm
    Reduction of Area 35 % 35 %
    Modulus of Elasticity 205 GPa 29700 ksi Typical for steel
    Bulk Modulus 140 GPa 20300 ksi Typical for steel
    Poissons Ratio 0.29 0.29 Typical For Steel
    Machinability 70 % 70 % Based on AISI 1212 steel. as
    100% machinability
    Shear Modulus 80.0 GPa 11600 ksi Typical for steel

    Electrical Properties Metric English Comments


    Electrical Resistivity 0.0000166 ohm-cm 0.0000166 ohm-cm annealed specimen
    @Temperature 20.0 @Temperature 68.0
    C F

    Thermal Properties Metric English Comments


    CTE, linear 11.7 m/m-C 6.50 in/in-F
    @Temperature 15.0 - @Temperature 59.0
    75.0 C - 167 F
    Specific Heat 0.486 J/g-C 0.116 BTU/lb-F annealed
    Capacity @Temperature @Temperature
    >=100 C >=212 F
    Thermal Conductivity 51.9 W/m-K 360 BTU-in/hr-ft-
    F

    Component Elements
    Metric English Comments
    Properties
    Carbon, C 0.27 - 0.34 % 0.27 - 0.34 %
    Iron, Fe 98.67 - 99.13 % 98.67 - 99.13 % As remainder
    Manganese, Mn 0.60 - 0.90 % 0.60 - 0.90 %
    Phosphorous, P <= 0.040 % <= 0.040 %
    Sulfur, S <= 0.050 % <= 0.050 %

    References for this datasheet.


    Some of the values displayed above may have been converted from their original units and/or rounded in order to display the information in a consistent
    format. Users requiring more precise data for scientific or engineering calculations can click on the property value to see the original value as well as raw
    conversions to equivalent units. We advise that you only use the original value or one of its raw conversions in your calculations to minimize rounding
    error. We also ask that you refer to MatWeb's terms of use regarding this information. Click here to view all the property values for this datasheet as they
    were originally entered into MatWeb.

    Source: MATWEB.com

    You might also like