SAP HANA SPS12 Backup and Recovery (Overview) Stephanie Lewellen, SAP HANA Product Management May 2016 Public |claimer This presentation outlines our general product direction and should not be relied on in making a purchase decision. This presentation is not subject to your license agreement or any other agreement with SAP. SAP has no obligation to pursue any course of business outlined in this presentation or to develop or release any functionality mentioned in this presentation. This presentation and SAP's strategy and possible future developments are subject to change and may be changed by SAP at any time for any reason without notice. This document is provided without a warranty of any kind, either express or implied, including but not limited to, the implied warranties of merchantability, fitness for a particular purpose, or non-infringement. SAP assumes no responsibility for errors or omissions in this document, except if such damages were caused by SAP intentionally or grossly negligent.Agenda Backup Recovery Support for multitenant database containers Database copy Dynamic Tiering integration Backint certification What's new?BackupSAP HANA Backup and Recovery In-memory data and persistent storage In-memory computing is safe: SAP HANA holds the bulk of its data in memory for maximum performance, but still uses persistent storage to provide a fallback in case of failure. During normal operation, data is automatically saved from memory to disk at regular savepoints. Additionally, all data changes are captured in redo log entries. A redo log entry is written to disk after each committed database transaction. After a power failure, SAP HANA can be restarted like any disk-based database and returns to its last consistent state by replaying the redo log entries since the last savepoint. —§ fim te Savepoint: ‘Afler each COMMIT, Data is written log is writen Power failure to disk (data area) to disk (log area)SAP HANA Backup and Recovery Why backups? While savepoints and redo log writing protect your data against power failures, this does not help when the persistent storage itself is damaged or a logical error occurs. ere Backups are required y To protect against disk failures —_—-_ To make it possible to reset the database to an earlier point in time Backups are also used for other scenarios such as database copies. OW Backups complement other availability strategies such as system replication or storage replication.SAP HANA Backup and Recovery Comparison of different high availability and disaster recovery options roe Ene Backup a RPO | RTO | | time design & prepare detect’ recover Performance ramp-up RPO (Recovery Point Objective) = worst-case data-loss RTO (Recovery Time Objective) = time to recover from outage Solution Used for Cost RPO RTO Perf. ramp Backup & Recovery HA& DR $ >0 high med ‘SAP HANA Host Auto-Failover HA 8 0 med long SAP HANA Storage Replication w/ QA, Dev. DR 38 o med long SAP HANA System Replication HA& DR $$$ - low short ‘SAP HANA System Replication w/ QA, Dev. HA&DR __sr8S o med long singe hesinstalaions _“synetvonous slvionSAP HANA Backup and Recovery Memory ® disk > backup Data backups/snapshots hsieliitehenieti ‘Afull data backup saves all current data that is contained in the data area (payload only). Delta backups save subsequently changed data. Pa COMMIT Assnapshot saves the content of the whole data area. of Snapshots are an alternative to full data backups. Data backups and snapshots are executed manually (scheduling possible) Log backups Log backups save the redo log entries that are Data BackupsiSnapshots Log Backups contained in the log area Log backups are carried out automatically 8 (asynchronously)SAP HANA Backup and Recovery Terminology Data Redo log entries + Data area = all data volumes + Log area = all log volumes * 1 data volume per service with persisted data = 1 log volume per service with persisted data + Data volumes contain the data and the undo log entries + Log volumes contain log segments, which contain the individual redo log entries = Alog segment is closed and automatically backed up ifit is full, or the log backup timeout has elapsed and the log segment contains at least one COMMIT redo log entry + Alog segment is released for overwriting once it has been backed up and is no longer needed for restartSAP HANA Backup and Recovery Data backups: full and delta Full data backup A full data backup contains all current data ~all data Note * Old data that is no longer valid but might still be physically present in the data volumes is not part of the data backup Incremental backup Delta backups contain data that was changed = changed data since since an earlier data backup the last data backup (fullor delta) ‘Two types: incremental and differential : Notes: + Delta backups are data backups — they contain actual pitrerentiel backuey data. In contrast, log backups contain redo log entries ~ changed data since (esequence of changes) the last full data backup J * Delta backups can be used together with a snapshot for recoverySAP HANA Backup and Recovery Delta backups — when to use what Full data backup Incremental backups... + ...are the smallest data backups as unchanged data will not be backed up in multiple backups > faster backup + ...are restored one after the other during a recovery > longer recovery times Incremental backup Differential backups. + ...increase the amount of data saved with each backup H > longer backup times * ..teduce the number of data backups during recovery Differential backup > faster recovery Note: You can also mix incremental and differential backups in your backup strategySAP HANA Backup and Recovery What happens during a data backup? While backups are running, users can continue rae v ee ore | | | All services that persist data are backed up __ Server * E.g, master name server, index servers Index en irate: Global backup savepoint for these services + Synchronized across all hosts and services. > No user interaction for synchronization required! |_Savepoint_\ |“ Savepoint ‘Savepoint ‘Savepoint . = Data marked in the global backup savepoint is. \ read from the data volumes and written to the Parallelization backups ‘Synchronized . backup savepoint + Parallelization by asynchronous reading per serviceSAP HANA Backup and Recovery Options for backups There are different options for carrying out backups for SAP HANA > Backups to the file system > Backups via the “Backint for SAP HANA” API to 3" party tools > Data snapshots using storage tools Note: You can mix different backup options, e.g. write the data backups to the file system and the log backups to Backint.SAP HANA Backup and Recovery Options for backups: File system You can back up data and logs to the file system SOT et Data backups can be triggered using me dbs * SAP HANA Cockpit * SAP HANA Studio * SQL commands * DBA Cockpit (scheduling) Log backups are written automatically More information: * File systems that are not supported: SAP Note 1820529 * Data backup scheduling can be performed in the SAP HANA cockpitSAP HANA Backup and Recovery Options for backups: Backint (3 party backup tools) You can back up data and logs using 3rd party backup tools SUTTTT ST) SAP HANA provides an API (“Backint for SAP HANA’) via which 3 party backup tools can be connected * 3° party backup agent runs on the SAP HANA server * Backups are transferred via pipe Direct integration with SAP HANA: * Data backups to Backint can be triggered using SAP HANA Cockpit, SAP HANA Studio, SQL commands, or DBA Cockpit rere * Log backups are automatically written to Backint (if Gees configured)SAP HANA Backup and Recovery Options for backup: Backint — parallel streaming (|) For improved performance Backint can now use multiple parallel streams for data backups If parallel streams have been configured, the individual service backups are distributed across all available streams. Note that the different services always use dedicated backup streams. Backups will only be distributed if they are bigger than 128 GB. Both full and delta backups are supported. To configure the number of parallel streams, use the parallel_data_backup_backint_channels ini file parameter (default: 1, max: 32) aemeeed During recovery, the number of streams used is the same as during backup (independent of the current as : — setting of the parameter) Syren Note: It is recommended to adapt the configuration of the 3" party backup tool accordingly.SAP HANA Backup and Recovery Options for backup: Backint — parallel streaming (II) In the example below, 3 parallel streams have been configured, The index server backup is distributed across 3 streams. Because both name server and XS engine backups are smaller than 128 GB, they are not distributed across several streams Index server backup (1/3) Index server backup (2/3) Index server eran backup (3/3) Sy as Name server backup (1/1) XS engine backup (1/1)SAP HANA Backup and Recovery Options for backups: Snapshots As an alternative to data backups to the file system or to Backint, you can use snapshots (data only) irst, you trigger the creation of an internal data snapshot in SAP HANA using SAP HANA Studio or SQL commands ("prepare database”) 2. Using a storage tool or similar, you create a snapshot of the whole data area 3. Confirm the snapshot as successful, using SAP HANA Studio or SQL commands. This is necessary to include the snapshot in SAP HANA's backup catalog Note: No other data backup is possible until the snapshot has either been confirmed or canceled STNTy Et Eeerrerr ana pins BOTY Internal snapshot Peers) een Rett?SAP HANA Backup and Recovery Options for backup: Comparison ‘Advantages *+ Consistency checks on block level Consistency checks on block level ‘Additional features, e.g. encryption (or de-duplication Data center integration Backups immediately availabe for recovery Usually createdirestored very fast + Negligible network load Disadvantages ~ Additional storage > cost impact + File system fil level needs to be ‘monitored + Additional time needed to make backups available for recovery + Network load Network load ~ No consistency checks on block level ~ Current data only (backup size usually smaller than the data area) (Current data only (backup size usually smaller than the data area) ~ Size of the data area, but usually compressedide-duplicated by storage Duration © 10-bound (reading trom data volumes, iting to file system) +_Network-bound (writing to file system) 1O-bound (reading from data volumes) [Network-bound (ariting to backup server) * Usually negligible (logical pointers are replicated)SAP HANA Backup and Recovery Tools By SAP * SAP HANA Cockpit (web-based administration tool) * SAP HANA Studio (Eclipse-based administration tool and IDE) * DBA Cockpit (ABAP-based tool for high-level database administration tasks) 3rd party * Certified backup tools (connected via Backint API) * Storage tools (for snapshots)SAP HANA Backup and Recovery Backup operations in SAP HANA Cockpit Support for backup operations has been extended in SAP HANA Cockpit The Data Backup tile shows the state of the current backup. Clicking on the tile takes you to the backup catalog. sapranncoape wn. @ atone D7 GAPHaNA cect AO Ahan Backup CatalogSAP HANA Backup and Recovery Displaying the backup catalog in SAP HANA Cockpit The backup catalog provides detailed = armacae mmo ——e information on backups, including snapshots ~ The backup catalog is stored within SAP HANA. Itis backed up itself as part of the log backup (even in log mode OVERWRITE). This allows for offline access to the backup catalog during recovery. Displaying the backup catalog 4, In SAP HANA Cockpit, click on the Data Backup tile 2. By clicking on an entry in the catalog, detailed information on the respective backup is displayedSAP HANA Backup and Recovery Customizing the backup catalog in SAP HANA Cockpit You can select which columns are displayed in the backup catalog in SAP HANA Cockpit To hide/unhide columns, use the check boxes in the Columns dialog. Bact Catalog To change the order in which the columns are displayed, use the arrow buttons at the top of the sort dialog. Note: You can also customize the details pages of the backup catalog in the same way.SAP HANA Backup and Recovery Filtering the backup catalog in SAP HANA Cockpit (I) You can filter the backup catalog in SAP HANA Cockpit The filter dialog displays the number of filters that are set for the different columns. sackp Type ° stan Tne oOSAP HANA Backup and Recovery Filtering the backup catalog in SAP HANA Cockpit (II) Click on the filter type to change the filter valuesSAP HANA Backup and Recovery Filtering the backup catalog in SAP HANA Cockpit (III) The current filter settings are displayed in the blue filter bar at the top of the backup catalog : ‘SAP HANA Cockpit-H11 - PRODUCTION Backup Catalog To change the settings, you can either click on the filter bar or the filter button |=SAP HANA Backup and Recovery Creating a data backup in SAP HANA Cockpit Using SAP HANA Cockpit, you can create ; SSN data backups to the file system or to Backint ong Both full and delta backups are supported Creating a data backup 1. In SAP HANA Cockpit, click on the Data Backup tile 2. On the Backup Catalog page, choose Start New Backup 3. Specify your backup settings 4. Start the backup by choosing Back Up 5. The progress is displayed on the Data Backup tile To view the progress details, click the tile By toggling between the backup types, you can easily compare the estimated backup sizes of complete, incremental and differential backups.SAP HANA Backup and Recovery Data backup scheduling in the SAP HANA cockpit (1) You can now schedule data backups inthe [# gy SAP HANA Cockpit - TSA @ SAP HANA cockpit. « To open the backup scheduling page, from within the Data Backup application, select Create Schedule at the bottom of the backup catalog. To view existing data backup schedules, select Go to Schedules. Backup Catalog 640,68 cay seen You can schedule complete, incremental, or nee aan aE differential backups, as well as backups to file or on “am “Gm cel third-party (Backint) tools. oe =o Before scheduling backups, enable the XSC base scheduler, and assign the additional scheduler role to the database user: sap.hana.backup.roles::SchedulerSAP HANA Backup and Recovery Data backup scheduling in the SAP HANA cockpit (II) Specify the schedule data settings. At the top of the Schedule Settings page, select the general data backup settings: + Backup Type: Complete, incremental or differential data backup Note: Currently snapshots cannot be scheduled. + Destination Type: File-based or Backint- based + Backup Prefix: Dateltime place holder that is replaced at backup execution + Backup Destination: For file-based data backup, it's the target location in the file system, otherwise it's the unchangeable identifier of the named pipe used by BackintSAP HANA Backup and Recovery Data backup scheduling in the SAP HANA cockpit (III) Specify the schedule data settings. On middle of the Schedule Settings page, specify the proper schedule data settings: + Schedule Name: an unique identifier + Start of Schedule: Date and time when the schedule shall become active, specified in UTC Note: Next resp. first execution time will be caloulated dependent of the recurrence pattern + Recurrence pattern: + Weekly: one or more days in a week including recurrence all n weeks (max 4) ‘+ Monthly: first, second, third, forth or last of a weekday including recurrence all n month (max 12) + Create Backup at: Execution time of the scheduled backup, specified in UTCSAP HANA Backup and Recovery Data backup scheduling in the SAP HANA cockpit (IV) Get an overview of scheduled 7 Rap AAACN data backups. From the Backup Schedules page, you can view existing schedules. sate ecurence sao Te Passed 7 rcrementa ata Bahay You can activate or pause schedules from the schedule menu, drill down into Passes 6) ae ee ome Os Oa individual schedule details, or delete a schedule permanently. You can also execute these operations on the Schedule Settings details page using the toolbar buttons. Note: You cannot modify a schedule.SAP HANA Backup and Recovery Backup information in SAP HANA Studio You can also use SAP HANA Studio to display the current backup status The backup overview displays information on * Progress of the currently running data backup, with information on the services included in the backup * Last successful data backup ~ Start/end time, duration, size, and throughput ~To display more detailed information on this data backup, click More Information * Open snapshot (if available) Buttons for * Starting a data backup * Creating/confirming a snapshot * Displaying backup.log fileSAP HANA Backup and Recovery Displaying the backup catalog in SAP HANA Studio You can also display the backup catalog using SAP HANA StudioSAP HANA Backup and Recovery Creating a data backup in SAP HANA Studio You can also use SAP HANA Studio to create data backupsSAP HANA Backup and Recovery Creating a delta backup in SAP HANA Studio To create delta backups, you can use SAP HANA Studio or SQL commands Creating a delta backup 1. Inthe Systems view in SAP HANA Studio, right-click on the system and choose Backup and Recovery > Backup System. 2. Choose the backup type, for a delta backup: either Differential Data Backup or Incremental Data Backup, and specify further settings 3. Start the backup Note: The creation of delta backups is not yet available in SAP HANA CockpitSAP HANA Backup and Recovery Creating a snapshot To create snapshots, you can use SAP HANA Studio or Sassi = SQL commands ee Some storage tools can also trigger snapshots in SAP a HANA directly a Creating a snapshot 0 1, Inthe Systems view in SAP HANA Studio, right-click on the system and choose Storage Snapshot... > Prepare. Alternatively, you can use the SQL command: BackuP Dara CREATE SNAPSHOT COMMENT ‘My Snapshot Test! 2. Using the storage tool, create a snapshot of the SAP HANA data area 3. In SAP HANA Studio, confirm the successful snapshot and enter the external snapshot ID. Alternatively, you can use the SQL command: BACKUP DATA CLOSE SNAPSHOT BACKUP_ID 3456789 SUCCESSFUL 'storage_id_12345'SAP HANA Backup and Recovery Backup configuration in SAP HANA Studio To change the backup configuration, use SAP HANA Studio * Backint Ifa 3rd party backup tool is installed, it is displayed automatically. You can optionally specify vendor- spediic parameter files * Data backup Default settings for data backups tothe file system (Gestination, maximum filesize) Note: You specify the destination type (file or Backint) when executing the data backup * Log backup Default settings for log backups (destination type - file ot Backint) destination, backup interval) Log backups are carried out automatically unless disabled Note: This is not yet available in SAP HANA CockpitSAP HANA Backup and Recovery Backup lifecycle management in SAP HANA Studio You can use SAP HANA Studio or SQL commands to delete old backups Deleting old backups may be required in order SSS to manage your backup storage space or to fulfill regulatory deletion requirements You can delete old backups * From the backup catalog (logical view) * Physically (from disk and/or from a 3rd party backup server via the Backint API) You can enable an audit event to create an entry in the audit trail whenever a backup is deleted using this function Note: Not yet available in SAP HANA CockpitRecoverySAP HANA Backup and Recovery Backups during normal operation Time Last Most recent full backup redo log entries from the log area Incremental backup Differential backup Log backupSAP HANA Backup and Recovery Recovery options Time (A) To the most recent state * Full backup (data backup to the file system/Backint or snapshot) + last differential backup (Note: not supported if a snapshot is used as basis) + subsequent incremental backups (Note: not supported if a snapshot is used as basis) + subsequent log backups + redo log entries that are still available in the log area (if it was not destroyed by the failure) (B) To a point in time in the past * Same as above; redo log entries from the log area might not be required (C) To a specified full backup * Full backup, but no replay of redo log entries (‘clear log")SAP HANA Backup and Recovery Recovery phases OD Tine Data recovery Log replay Restart After the initial collection of system information required for the recovery, there are the following recovery phases 1. Data recovery (full backup + delta backups, if applicable) 2. Log replay (log backups + log entries from the log area, if applicable) 3. RestartSAP HANA Backup and Recovery Improved log replay during resume recovery (II) Resume database recovery after a failure during delta data backup recovery. » Accelerate subsequent recovery using successful recovered full data backups, differential and pee oe od incremental data backups and log backups. + Successful recovered data backups are kept implicitly Time as internal database snapshot (aka fallback point) in > the data area. + Ifa recovery failure occurs during delta data backup : — recovery, the full backup recovery is preserved, and Data recovery Log replay only the delta data backups and the log backups are reprocessedSAP HANA Backup and Recovery Improved log replay during resume recovery (III) Resume database recovery after a failure during log recovery. « Data changes caused by replaying log backups during Savepoints a database recovery are periodically stored in the log area with savepoints. } + The frequency of savepoints can be set using the Time configuration parameter: Jog_recovery_resume_point_interval (default: 1.800 sec; max: 18.000 sec, 0 = disabled) + Once the interval expires, the next savepoint log entry Data recovery Log replay will be replayed. to) + Ifa recovery failure occurs after a savepoint, only the log backups after most recent savepoint must be reprocessed.SAP HANA Backup and Recovery Starting a recovery in SAP HANA Studio You can use SAP HANA Studio or SQL commands to execute a recovery Caution: For a recovery, SAP HANA will be shut down In the Systems view in SAP HANA Studio, choose Backup and Recovery > Recover System... from the context menu of the database and enter the credentials of the SAP HANA operating system user adm Note: Recovery is not yet available in SAP HANA CockpitSAP HANA Backup and Recovery Recovery to the most recent state (option A) You can use either a data backup (from the file system or Backint), or a snapshot as the basis for the recoverySAP HANA Backup and Recovery Recovery to a point in time in the past (option B) You can use either a data backup (from the file system or Backint), or a snapshot as the basis for the recoverySAP HANA Backup and Recovery Recovery using a specified data backup or snapshot (option C) You can use either a data backup (from the file system or Backint), or a a snapshot as the basis for the recovery. Note that you do not need the backup catalog for this recovery option but can also directly specify a backup. One reeetn te aSAP HANA Backup and Recovery Further recovery settings, e.g. use of delta backups during recovery Recovery includes delta backups automatically SAP HANA automatically determines the best recovery strategy based on all available backups, including delta backups. If you do not want SAP HANA to use delta backups for the recovery, de-select Use Delta Backups when specifying your recovery settingsSAP HANA Backup and Recovery Recovery SQL statement displayed in the recovery wizard You can display the SQL statement for a specific recovery in SAP HANA Studio After you have specified your recovery settings, a summary screen is displayed. You can display the SQL statement equivalent to these recovery settings by clicking the relevant buttonSAP HANA Backup and Recovery Recovery phases After the initial collection of system information required for the recovery, there are the following recovery phases: Phase 1: Data recovery * Using data backups or snapshot plus delta backups if available Phase 2: Log recovery * Redo log entries are replayed = from the log backups andlor —from the log area (if still available/required) Phase 3: Restart * SAP HANA is restartedSAP HANA Backup and Recovery Preparation of a recovery using a snapshot As an alternative to a full data backup to the file system/Backint, you can use a snapshot as the basis for a recovery We recommend that you already transfer the snapshot back to the data area of SAP HANA before starting the recovery. STNTy Et oreo Plugin’ aN pins cor BOY Sear Bert? Internal snapshot Peer eerorn)Support for multitenant database containersSAP HANA Backup and Recovery Multitenant database containers: Overview Multitenant database containers allow you to run multiple applications on one SAP HANA system * 1 system database and multiple tenant databases * Shared installation of the database system software * Strong isolation features per default, the system database and each of the tenant databases have their own: ~— Database users, database catalog, repository, persistence, ‘System backups, traces and diagnosis files, database » The system database contains information about the system as a whole and is used for central system administration — Tenant Tenant » The tenant databases contain the actual business data database 1 JM database 2 : ; Ueno More information: ui * SAP Note 2096000SAP HANA Backup and Recovery Multitenant database containers: Backup/recovery concept MDC systems follow the same backup/recovery principles as single-container systems The system database plays a central role for MDC backup and recovery + It can initiate both backups of the system database itself and of individual tenants databases. A tenant database can also carry out its own backups unless this feature has been disabled for this tenant database Note that the backup location in the file system is specified system-wide and tenant databases always back up to sub-directories of this location. * Recoveries are always initiated from the system database + The system privilege DATABASE ADMIN authorizes the administration of tenant databases from the system database To recover a complete MDC system, first the system database and then all tenants need to be recovered individually. Note: Snapshots are currently not supported in multi-tenant database container systemsSAP HANA Backup and Recovery Multitenant database containers: Backint support The current Backint API specification also covers MDC systems There are a few points that you need to be aware of when using a 3 party backup tool Isolation level “high” With SPS10, a new option “isolation level” was introduced for MDC systems. If the isolation level is set to high, all tenant databases run under individual operating system users. In high isolation scenarios, Backint is supported from the SAP HANA side but you need to check with your 3" party tool vendor whether any tool-specific restrictions apply. Tenant copy Tenant copy using Backint is currently not supported. Use file system backups for tenant copy insteadSAP HANA Backup and Recovery Multitenant database containers: SAP HANA Cockpit support You can use SAP HANA Cockpit to create data backups of the system database and of —l individual tenant databases E oF Log on to the relevant database and click on the Data Backup tile Create data backups and view backup information in the same way as for single-container databases Note: You can also use SAP HANA Studio to create data backups. Backup lifecycle management is currently not available in SAP HANA CockpitSAP HANA Backup and Recovery Multitenant database containers: Backing up the system database You regularly need to create data backups of the system database The system database contains information about the system as a whole and all tenant databases. and is used for central system administration. Creating a data backup of the system database 1. Inthe Systems view in SAP HANA Studio, right-click on the system database and choose Backup and Recovery > Backup Up System Database. 2. Specify your backup settings and start the backupSAP HANA Backup and Recovery Multitenant database containers: Backing up a tenant database from the system DB You regularly need to create data backups of SEs" the tenant databases The tenant databases contain the business data. They have their own index servers. Note: Depending on the system configuration, it may also be possible to initiate a data backup directly from a tenant database Creating a data backup of a tenant database 1, Inthe Systems view in SAP HANA Studio, right-click on the system database and choose Backup and Recovery > Backup Up Tenant Database. 2. Select the tenant database to be backed up 3. Specify your backup settings and start the backupSAP HANA Backup and Recovery Multitenant database containers: Viewing backup information Backup information is contained in the backup _ [e=5se>eunioiremomasa catalog Viewing information for all databases 1. Inthe Systems view of the system database in SAP HANA Studio, expand the system database and : double-click on Backup = 2. Open the Backup Catalog tab and select the database for which you want to view the information Viewing information for a tenant database 1. Inthe Systems view in SAP HANA Studio, expand the tenant database and double-click on Backup 2. Open the Backup Catalog tabSAP HANA Backup and Recovery Multitenant database containers: Backup lifecycle management You can delete backups that are not needed any longer Deleting old backups 1. Inthe Systems view of the system database in SAP HANA Studio, expand the system database and double-click on Backup 2. Open the Backup Catalog tab and select the database for which you want to delete backups (oS eo on 3. From the context menu, choose which backups you ev tn ee — want to delete. Specify whether the backups should ° be deleted from the backup catalog only, or also from aos ee the fle system/3" party backup tool oa = i SaSAP HANA Backup and Recovery Multitenant database containers: Recovering the system database Use SAP HANA Studio or SQL commands to recover the system database Caution: The whole system will be shut down, including all tenant databases * You need the adm operating system user credentials for recovering the system database * The system database can only be recovered to the latest state * Only the system database will be recovered, the content of the tenant databases is not affected Note: Recovery is currently not available in SAPSAP HANA Backup and Recovery Multitenant database containers: Recovering a tenant database Use SAP HANA Studio or SQL commands to recover an individual tenant database * Tenant databases can be recovered to the latest state, = point in time, or to a specific backup * The system database and all other tenant databases are not affected by the recovery of an individual tenant database * Recovery of a tenant database can only be initiated from the system database. Note that the system database needs to be online for this. Note: Recovery is currently not available in SAP HANA CockpitDatabase copySAP HANA Backup and Recovery Database copy — overview You can copy a database using SAP HANA’s standard backup/recovery functions Atypical use case would be to copy your production system to a smaller QA system. Note that if the target system has less resources, e.g. less CPU and RAM, performance cannot be expected to be the same as in the source system. As a basis for a database copy, you can use a full backup: data backup to the file system/Backint or a snapshot. You can choose to also use delta backups/log backups The number of hosts can differ between source and target system The following scenarios are possible: n> n__ hosts n > nx hosts (not supported for snapshots) n > nx hosts (not supported for snapshots)al SAP HANA Backup and Recovery Database copy fromn > n Source and target system have the same number of hosts Host n Host2_) g Hi lost 1 {a} &, . J | ieaesener |, 8, %e, ‘Source database Target database with n hosts Data backup or snapshot + with n hosts (e.g. PROD) log backups (e9. DEV)al SAP HANA Backup and Recovery Database copy from n > n+x First copy to a system with the same number of hosts (n > n), then add more hosts (+x) a) Hostn | Host n , Host 3 Host 2 a = 2 ii ‘ a Jos Host 1 me ( ' cs aadnos, (|g Hosts (iaersenert)) & 3, \ |Geen) “ana a So sf distribute Index Sever 1 4 Neo eo “ data i ) LY “= a aw, Source database Target database Target database with n hosts Data backup + waitin hosts with n#4 hosts (e.g. PROD) log backups (e.g. PROD_NEW) (e.g. PROD_NEW)SAP HANA Backup and Recovery Database copy from n > n-x Before you copy the database, configure x additional index servers in the target system Host2 | Node 2 Host 1 Node 1 Remove | 7 (eae) _adational aaa SF index o Cease) servers i Source database Target database with n hosts Data backup + with n-1 hosts (e.g. PROD) log backups (e-g.04)Integration with Dynamic TieringSAP HANA Backup and Recovery Dynamic tiering — overview Dynamic tiering is an add-on option for SAP HANA for managing data of different temperatures Backup and recovery always apply to all of SAP HANA, both the hot and the warm store Hot data Always in memory Classical SAP HANA database tables Warm data In extended table = disk-based columnar table Dynamic Tiering” option Extended table Extended table (definition) (data) eee Coe ee tate] Hot table (definition/data) Note: Snapshots are currently not supported All data of extended table eer osSAP HANA Backup and Recovery Dynamic tiering — backup/recovery Backup * Backup paths for the warm store are the same as for the hot store * Data backups are carried out as usual for SAP HANA either using SAP HANA Studio, SAP HANA Cockpit, or SQL commands. They will automatically include the warm store * Log backups are carried out automatically (unless disabled) » The SAP HANA backup catalog also contains information about backups of the warm store Recovery * Both data and log backups for the hot and the warm store are required for a recovery. You cannot recover one without the other * The number and type of services must be identical in both the source and target system * Recovery can be carried out in SAP HANA Studio or using SQL commandsBackint certificationSAP HANA Backup and Recovery Backint certification — certified tools Certification is an installation prerequisite for tools using the “Backint for SAP HANA” API * See SAP Note 17: (Using backup tools with Backint) Certified tools (as of 2016.05.) hanteea ‘Allen Systems | ASG-Time Navigator 4.4 ‘Smee Online listing of certified tools: Application Development Partner Directory * Enter the search term HANA-BRINT and click on a partner name > "SAP Certified Solutions” for further detailsWhat’s new? SAP HANA SPS12 and SPS11SAP HANA Backup and Recovery What’s New in SAP HANA SPS12 Backup + Data backup scheduling capability in the SAP HANA cockpit © Show the approximate size of backup * Customize the backup overview page concer Recovery + Improved log replay during resume recovery Supportability \g the backup prefix * Reconstruct the SAP HANA backup catalog using file-based delta data backups * Single DB copy using Backint-based data backup w/o accessing the backup catalog * Recovery with storage snapshots and delta backups Backint certifications: * New certification: IBM Spectrum Protect for Enterprise Resource Planning 7.1 (POWER architecture) * Recertification: Veritas NetBackup 7.7 (Intel architecture)SAP HANA Backup and Recovery What's New in SAP HANA SPS11 Backup * Extended backup functionality in SAP HANA Cockpit — Support for delta backups —Filtering and sorting of the backup catalog Recovery * Resume recovery after error during log replay * MDC: Configure target host for tenant recovery Backint * Multiple parallel data backup streams * New certifications: Allen Systems ASG-Time Navigator 4.4, HP StoreOnce Plug-in for SAP HANA 1.0, Libelle BusinessShadow 6.0.6, IBM Spectrum Protect for Enterprise Resource Planning 7.1 (certified for POWER architectures)More informationSAP HANA Backup and Recovery More information + Documentation: SAP Help Portal ~ Administration Guide, ‘Technical Operations Manual, SQL Reference Guide + Overview presentation: SAP HANA Backup/Recovery Overvie + Certification: ‘Backint for SAP HANA" Certification * Best practice: SAP Note 2091951: SAP HANA Backup and Restore + Training: HA200: SAP HANA - Operations & Administration San 1642148 FAQ: SAP HANA database backup and recovery BBackint Tools und Support FAQ: SAP HANA database and storage snapshots, FAQ: SAP HANA Database Backup & Recovery in a SAP HANA System Replication landscape 2021789 SAP HANA revision and maintenance strategy Further SAP notes are available on component HAN-DB-BACEy Thank You! Contact information: Stephanie Lewellen, SAP HANA Product Management [email protected] ©2015 SAP SE oran SAP afte company. Al oh reserved