793F PDF

Download as pdf or txt
Download as pdf or txt
You are on page 1of 4
At a glance
Powered by AI
The document provides details on the features and specifications of the Caterpillar 793F mining truck.

The 793F has a powerful engine, smooth transmission, robust braking and suspension, and a comfortable cab for operators.

The 793F uses a Cat C175-16 engine that produces over 2,600 horsepower and has a large displacement and turbocharging for high performance.

Cat

793F
MINING TRUCK

FEATURES:
High Performance Engine The Cat C175-16 engine offers you the Reliable Mechanical Drive System The 793Fs power train gives you
perfect balance between power, robust design and economy. the fastest truck on steep grades, poor underfoot conditions and on
Enhanced Serviceability Improved serviceability points and grouped haul roads with high rolling resistance.
service locations mean your truck spends more time on the haul road Robust Braking Cat oil-cooled, multiple disc brakes on all four
than in the shop. corners offer you exceptional, fade-resistant braking.
Power Shift Transmission A smooth shifting six speed transmission Comfortable Cab Operators find the large, spacious cab offers
using ECPC gives operators a comfortable ride, constant power and unmatched visibility and exceptional comfort.
improved fuel efficiency. Truck Body A variety of Caterpillar designed and built bodies
provide you optimal performance and reliability.

Specifications
Engine Operating Specifications
Engine Model Cat C175-16 Nominal Payload Capacity 226.8 tonnes 250 tons
Gross Power SAE J1995 1976 kW 2,650 hp Top Speed Loaded 60 km/h 37.3 mph
Net Power SAE J1349 1848 kW 2,478 hp Steer Angle 36 Degrees
Torque Rise 20% Turning Diameter Front 28 m 93 ft
Bore 175 mm 6.9 in Turning Circle Clearance Diameter 33 m 107 ft
Stroke 220 mm 8.7 in Gross Machine Operating Weight 386 007 or 851,000 or
Displacement 85 L 5,187 in3 390 089 kg 860,000 lb

Power ratings apply at 1,750 rpm when tested under the specified Refer to the Cat Mining Truck 10/10/20 Overload Policy for maximum
condition for the specified standard. gross machine weight limitations.
Ratings based on SAE J1995 standard air conditions of 25 C (77 F)
and 99 kPa (29.61 Hg) dry barometer. Power based on fuel having API Final Drives
gravity of 35 at 16 C (60 F) and an LHV of 42.780 kJ/kg (18,390 Btu/lb) Differential Ratio 1.8:1
when engine used at 30 C (86 F).
Planetary Ratio 16:1
No engine derating required up to 3353 m (11,000 ft) altitude.
Total Reduction Ratio 28.8:1
EPA Compliant. Where applicable, the Cat C175-16 engine is compliant
with U.S. Environmental Protection Agency emission requirements.
Transmission
Weights Approximate Forward 1 12.9 km/h 8 mph
Chassis Weight 122 300 kg 270,000 lb Forward 2 17.4 km/h 10.8 mph
Body Weight Range 26 862- 59,220- Forward 3 23.8 km/h 14.8 mph
47 627 kg 105,000 lb Forward 4 32.1 km/h 19.9 mph
Forward 5 43.6 km/h 27.1 mph
Chassis weight with 100 percent fuel, hoist, body mounting group, Forward 6 60 km/h 37.3 mph
rims and 40.00R57 tires.
Reverse 11.8 km/h 7.3 mph
Body weight varies depending on how body is equipped.
793F Mining Truck

Suspension Sound
Effective Cylinder Stroke Front 130.5 mm 5.1 in Sound Standards
Effective Cylinder Stroke Rear 105.5 mm 4.2 in
The operator sound pressure level measured according to work cycle
Rear Axle Oscillation 4.9 degrees procedures specified in ISO 6394 and 6396 is 76 dB(A) for cab offered
by Caterpillar, when properly installed and maintained and tested with
Body Hoists doors and windows closed.
Pump Flow High Idle 846 L/min 224 gal/min Hearing protection may be needed when operating with an open
Relief Valve Setting Raise 20 370 kPa 2,955 psi operator station and cab (when not properly maintained or doors/
windows open) for extended periods or in a noisy environment.
Body Raise Time High Idle 19 Seconds
Body Lower Time Float 20 Seconds
Body Power Down High Idle 17.5 Seconds
Steering
Steering Standards SAE J15111 OCT90,
Twin, two-stage hydraulic cylinders mounted outside main frame, ISO 5010:1992
double-acting cylinders in second stage.
Power raise in both stages, power down in second stage. Dimensions (All dimensions are approximate.)
Automatic body lower modulation reduces impact on frame. Shown with 176 m3 (230 yd3) MSD II Body.

Brakes
Outside Diameter 874.5 mm 34.5 in
Brake Surface Front 89 817 cm2 13,921 in2
2
Brake Surface Rear 34 500 cm 20,847 in2
Standards J-ISO 3450 JAN88,
ISO 3450:1996 10

11
Weight Distributions Approximate 8
12

13
Front Axle Empty 48%
Rear Axle Empty 52% 7
1
Front Axle Loaded 33%
Rear Axle Loaded 67% 6
14

3 4

Capacity MSD II 100% Fill Factor 2 15

Struck 112-142 m3 146-186 yd3 16

Heaped (SAE 2:1) 159-190 m3 209-250 yd3 17

1 Height to Top of ROPS 5597 mm 18 ft 4 in


Contact your local Cat dealer for body recommendation.
2 Overall Length 13 702 mm 44 ft 11 in
3 Wheelbase 5905 mm 19 ft 5 in
Service Refill Capacities 4 Rear Axle to Tail 4257 mm 13 ft 11 in
Fuel Tank 2839 L 750 gal 5 Ground Clearance 990 mm 3 ft 3 in
Fuel Tank (optional) 4922 L 1,300 gal 6 Dump Clearance 1301 mm 4 ft 3 in
Cooling System 1074 L 284 gal 7 Loading Height Empty 6533 mm 21 ft 5 in
Crankcase 312 L 82 gal 8 Overall Height Body Raised 13 878 mm 45 ft 6 in
Rear Axle Housing 984 L 260 gal 9 Centerline Front Tire Width 5630 mm 18 ft 6 in
Steering System (Includes Tank) 290 L 77 gal 10 Engine Guard Clearance 1217 mm 4 ft 0 in
Brake/Hoist System (Includes Tank) 1315 L 347 gal 11 Overall Canopy Width 8295 mm 27 ft 3 in
Torque Converter/Transmission Sump 102 L 27 gal 12 Outside Body Width 7626 mm 25 ft 0 in
Torque Converter/Transmission System 209 L 55 gal 13 Inside Body Width 6946 mm 22 ft 9 in
(Includes Sump)
14 Front Canopy Height 6603 mm 21 ft 8 in
15 Rear Axle Clearance 1006 mm 3 ft 4 in
ROPS 16 Centerline Rear Dual Tire Width 4963 mm 16 ft 3 in
ROPS Standards 17 Overall Tire Width 7605 mm 24 ft 11 in
ROPS (Rollover Protective Structure) for cab offered by Caterpillar
meets ISO 3471:1994 ROPS criteria.
FOPS (Falling Objects Protective Structure) meets ISO 3449:1992
Level II FOPS criteria.

2
793F Mining Truck

STANDARD EQUIPMENT
ELECTRICAL ROPS Cab, Insulated/Sound Suppressed Neutral Start Switch
Alarm, Back-up Seat, Operator, Air Suspension Programmable Top Speed
Brushless Alternator, 150 ampere Seatbelt, Operator, Three Points, Retractable Pre-lubrication/Engine
Batteries, 93-amp hour, low maintenance, Seatbelt, Trainer, Two Points, Retractable Rear Axle Continuous Lubrication/Filtration
12-volt (2) Stairway and Walkway Access, 600 mm
Converter, 12-volt electrical OTHER STANDARD EQUIPMENT
(23.6 in)
Automatic Lubrication System
Electrical System, 24-volt, 10, 15 and 20 amp Steering Wheel, Tilt, Padded, Telescopic
Aux Buddy Dumping Quick Connect
Battery Charge Receptacle Storage Compartments
Aux Steering Quick Connect (towing)
Lighting System Tinted Glass
Driveline Guard
Back-up and Hazard Lights Transmission Gear Indicator
Fast Fill Fuel System
Directional Signals (front and rear LED) VIMS Message Center with Advisor
Fuel Filter with Water Separator
Front Stair Access/Service Deck Window, Operator, Electric Powered
Ground Level Battery Lockout
Stop/Tail Lights (LED) Windshield, Wiper Intermittent Control
Ground Level Engine Shut-down
Engine Compartment and Washer
Ground Level Engine Start Lockout
VIMS, Blue Light (LED)
POWER TRAIN Ground Level Transmission Lockout
Headlights, with Lo-Hi Beam Selector Cat C175-16 Tier 2 Emissions Ground Level VIMS Data Port
OPERATOR ENVIRONMENT Compliant Engine
Hi-speed Crankcase Oil Change
Air Conditioner with Automatic Air Cleaner with Precleaner (4)
Hydraulic Filters, 1,000 hour
Climate Control Air-to-Air Aftercooler (ATAAC)
Reservoirs (3 separate)
12-volt DC Power Supply (3) Automatic Starter Protection
Brake/Hoist, Steering/Fan,
Coat Hook Ether Starting Aid (automatic) Transmission/Converter
Cup Holder Multi-Point Oil Pressure Sensing Rock Ejectors
Diagnostic Connection Port Turbocharging (4)/Aftercooled Service Points, Ground Level
Dome Courtesy Light Braking System Sight Level Gauges for Hydraulic/Engine Oil
Entertainment Radio Ready Automatic Retarder Control, Adjustable SOSSM Sample Ports
5 amp Converter, Speakers and Brake Release Motor (towing) Supplemental Steering (automatic)
Wiring Harness Engine Overspeed Protection Tie Down Eyes
Gauge/Indicators Extended Life Brake Disc Material Tow Hooks (front)/Tow Pin (rear)
Gauge Panel: Oil-cooled, Multi-disc (front and rear) Traction Control System
Transmission Fluid Temperature Service, Retarding, Parking, Secondary Vandalism Protection Locks
Brake Oil Temperature Park Brake Integrated with Gear Selector Vital Information Management System (VIMS)
Engine Coolant Temperature Secondary, Emergency Includes VIMS Payload Monitor with
Fuel Level Transmission MAX Payload and Speed Manager
Torque Converter Oil Temperature 6-speed, Automatic Powershift with (Recommend using download cable
Electric Engine Control Fault Indicator Electronic Control (ECPC) 127-9797 and PC based software
Electric Hour Meter Body-up Reverse Neutralizer JERD2175. Supplemental software
Speedometer Body-up Shift Inhibitor VIMS Supervisor YERA1403.
Tachometer Controlled Throttle Shifting Order separately. Computer not provided.)
Heater/Defroster, 11 070 kCal (45,930 Btu) Directional Shift Management ANTIFREEZE
Hoist, Body Control (electric) Downshift/Reverse Shift Inhibitor Extended Life Coolant to 35 C (30 F)
Horn Individual Clutch Modulation
Integrated Object Detection System Lock-up Torque Converter
Mirrors, Right and Left Neutral Coast Inhibitor

3
793F Mining Truck
OPTIONAL EQUIPMENT
Additional Lighting Engine Delay Shutdown Timer Retractable Front Sun Visor
Additional Retarding for Downhill Hauls Extended Life Wheel Stations Rim Guard
Body Heat External Digital Payload Display Rims (813 mm/32 in)
Cat Comfort Air Suspension Trainer Seat External Heated Mirrors Road Analysis Control (RAC)
Antifreeze/Coolant Protects to 50 C (58 F) Fast Fill Service Center SL-V Grease Injectors
Brake Wear Indicator Gauge Fuel Tank (4920 L/1,300 gal) Throttle Lock
Cabin Air Precleaner Cat Comfort Heated Operator Seat Walkway and Handrail for Rear Cab Access
Center Tow Bumper Attachment High Intensity Discharge (HID) Lighting Wheel Chocks
Electric Powered Window, Right Side (front and rear) Work Area Vision System (WAVS)
Electric Starting System Hub Odometer (km and miles)
Engine Coolant and Oil Heater for Portable Fire Extinguisher
Cold Weather Starts Rear Axle Lubrication Cooler

For more complete information on Cat products, dealer services, and industry solutions, visit us on the web at www.cat.com AEHQ6639-01 (08-12)
2012 Caterpillar Replaces AEHQ6639
All Rights Reserved
Printed in U.S.A.
Materials and specifications are subject to change without notice. Featured machines in photos may include additional
equipment. See your Cat dealer for available options.
CAT, CATERPILLAR, SAFETY.CAT.COM, their respective logos, Caterpillar Yellow and the Power Edge trade dress, as
well as corporate and product identity used herein, are trademarks of Caterpillar and may not be used without permission.

You might also like