Scribd Logo
Upload

Welcome to Scribd!

  • 37 views

    Note To Student: A1+A2+A3 Together Should Be A Minimum of 500 Words. Enter Word Count Here-517

    Uploaded by

    Preet Parmar
    K1. Kapil Sharma is a student at MTX branch assigned to work on a project at VE Commercial Vehicles Ltd to improve fuel efficiency of trucks by powering HVAC systems through renewable energy sources instead of the engine alternator. K2. The first goal is to analyze solar energy potential by measuring output of solar panels installed on trucks at different times of day and comparing it to HVAC energy needs. K3. Further work will identify additional renewable sources, optimize the system, and develop an efficient way to store excess energy for use when primary sources aren't available, with the aim of powering HVAC without engine use.

    Copyright:

    © All Rights Reserved
    Download as DOCX, PDF, TXT or read online from Scribd

    Note To Student: A1+A2+A3 Together Should Be A Minimum of 500 Words. Enter Word Count Here-517

    Uploaded by

    Preet Parmar
    37 views2 pages
    K1. Kapil Sharma is a student at MTX branch assigned to work on a project at VE Commercial Vehicles Ltd to improve fuel efficiency of trucks by powering HVAC systems through renewable energy sources instead of the engine alternator. K2. The first goal is to analyze solar energy potential by measuring output of solar panels installed on trucks at different times of day and comparing it to HVAC energy needs. K3. Further work will identify additional renewable sources, optimize the system, and develop an efficient way to store excess energy for use when primary sources aren't available, with the aim of powering HVAC without engine use.

    Original Description:

    booooo

    Original Title

    Goals Report 101309016 - Copy

    Copyright

    © © All Rights Reserved

    Available Formats

    DOCX, PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    K1. Kapil Sharma is a student at MTX branch assigned to work on a project at VE Commercial Vehicles Ltd to improve fuel efficiency of trucks by powering HVAC systems through renewable energy sources instead of the engine alternator. K2. The first goal is to analyze solar energy potential by measuring output of solar panels installed on trucks at different times of day and comparing it to HVAC energy needs. K3. Further work will identify additional renewable sources, optimize the system, and develop an efficient way to store excess energy for use when primary sources aren't available, with the aim of powering HVAC without engine use.

    Copyright:

    © All Rights Reserved
    Download as DOCX, PDF, TXT or read online from Scribd
    Download as docx, pdf, or txt
    37 views2 pages

    Note To Student: A1+A2+A3 Together Should Be A Minimum of 500 Words. Enter Word Count Here-517

    Uploaded by

    Preet Parmar
    K1. Kapil Sharma is a student at MTX branch assigned to work on a project at VE Commercial Vehicles Ltd to improve fuel efficiency of trucks by powering HVAC systems through renewable energy sources instead of the engine alternator. K2. The first goal is to analyze solar energy potential by measuring output of solar panels installed on trucks at different times of day and comparing it to HVAC energy needs. K3. Further work will identify additional renewable sources, optimize the system, and develop an efficient way to store excess energy for use when primary sources aren't available, with the aim of powering HVAC without engine use.

    Copyright:

    © All Rights Reserved
    Download as DOCX, PDF, TXT or read online from Scribd
    Download as docx, pdf, or txt
    of 2

    PROJECT SEMESTER

    Student Name: KAPIL SHARMA Regd No: 101309016


    Branch: MTX Faculty Supervisor: Mr.MOHIT
    GARG
    Host Organization & Address
    VE COMMERCIAL VEHICLES LTD.
    Phase 1, Special Economic Zone, Pithampur 454775, Dist. Dhar,
    MADHYA PRADESH
    Industry Mentor with email and contact number:
    Mr. Jitendra Singh Thakur, 07389710084

    A. As a result of completing this component, please take some time


    to reflect and highlight below three areas (mention at least three)
    of new learning or insight for you, including references for further
    reading cited?
    Note to student: A1+A2+A3 together should be a minimum of 500 words. Enter
    word count here- 517
    Student Input Faculty
    Supervisor
    Comments
    A1.
    I have been assigned cabin engineering under the
    research and development department. The project
    assigned to me is to run HVAC systems in trucks
    through renewable resources of energy and hence
    improve fuel efficiency by removing dependency on
    engine alternator. The first goal is to identify efficient
    renewable sources which could be used to run HVAC
    systems. Since solar energy is the most abundant
    and powerful resource, my goal is to measure the
    output generated by installing solar panels on trucks.
    I have to measure the current generated at different
    intervals of day and find the suitable period during
    which solar power can be utilized according to the
    need. The data about the output of the air
    conditioning unit is also to be measured to find that
    to what extent the extracted solar power is useful.
    Using this data, the analysis has to be done
    regarding how much power is needed for the HVAC
    unit and how much is being produced at different
    intervals of the day through solar power and is the
    solar energy self-sufficient to run the HVAC unit etc.
    A2.
    Once the analysis has been done, I have to calculate
    how much more power is needed to run the unit
    efficiently. I have to find modifications in the solar
    installation systems to optimize the output. Further I
    will have to identify more sources for collaborating
    with solar energy to increase the power output and
    meet to the needs of running the HVAC unit. The trial
    will be done for these new sources and the output
    power will measured. The method for installing all
    the resources in synergy will have to be developed so
    that the whole output is available to the HVAC unit as
    a single source. The installations will be remodified
    and improved until the required power is generated
    efficiently. The trials will be taken of the total power
    being provided to the HVAC unit. The equipment for
    storing the energy and discharging it as efficiently as
    possible will have to be found. The goal will be to
    harness more energy than that being utilized so that
    the excess energy can be utilized later. It will have to
    be ensured that the excess energy being produced is
    stored efficiently so that the system can run without
    using engine power even when the alternative
    sources are not working during any time of the day.
    A3.
    After achieving the required power generation and
    storage, the goal will be to make the whole set up
    ready according to the commercial point of view. The
    mounting of the installations will have to be
    considered so that they do not hinder the look,
    aerodynamics and performance of the truck. Various
    modifications will have to be introduced to increase
    further efficiency by finding further methods to
    decrease work load and needed power input.
    Ergonomics will be considered to provide full comfort
    to the passengers. Various methods for reducing the
    cost of the set up will be considered. Trials will have
    to be taken with the final assembled unit. Finally the
    commercialization of the produced set up will have to
    be achieved.

    You might also like