Local Control Network Tableau

LCN-KT8B
Capacitive tableau with 8 touch keys, 12 LEDs & bargraph display

Description
The LCN-KT8 is a tableau with 8 touch keys and 12 LEDs
for the LCN bus system. It connects to the T-Port
connnector of an available LCN-UPP, UPS, UP24, SH or
HU.
The keys are capacitive and operate as touch sensitive
there are no mechanical moving parts. It is absolutly flat
allowing a printable foil to be placed over the top. This is
then covered by a glass plate.
The LCN-KT8 fits over a surface mounted wall socket and
connects to an LCN-TEU, it is fixed to the wall with two
screws.

New: The bargraph display with 15 LEDs for the indication of

analog signals.

Optional an LCN-RR infrared remote-control receiver can be

installed in the LCN-KT8B, to control the same 8 keys or for
further 16 keys (Tabelle B und C).

Hardware equipment Field of application:

The tableau has 8 keys to centrally control lighting, shutters
awnings etc.
Base plate with 8 capacitive touch keys, 12 LEDs &
bargraph display with 15 LEDs for connecting to LCN-TEU The LEDs provide a visual representation of the actual
state as seen by the bus.
Glass cover

White plastic frame

Adapter cable for LCN-TEU

Hinweis:
To increase the power of the LED brightness a LCN-NU16 can
be connected.

105
Local Control Network Produkthandbuch

LCN-KT8B
Capacitive tableau with 8 touch keys, 12 LEDs & bargraph display

Dimensions: Technical data:

Mass (W x L x H): Keys:
Tableau with frame: 174 mm x 174 mm x 10 mm Type: 8 capacitive keys
Function: HIT / HOLD / RELEASE
Key table A

Signal lamps:
Type: 12 LEDs
OFF / BLINK / FLICKER / ON
174mm 10mm Function: bargraph display with 15 LEDs
Supply: Through module or aditional
LCN-NU16 for greater
brightness

General data:
Operating temp: -10oC bis +40oC
Humidity: max. 80% rel., Non
condensing
174mm

174mm

Environmental conditions: Stationary installation

according to VDE632,
VDE637

Protection: IP 20

Assembly: Installed over a deep surface

mounted box or electronic
socket with LCN-TEU.
Fixed with screws.

Circuit Diagram:
L L
N N
D D
PE PE

LCN-UPx

T
LCN-TEU
optional

+ -
LCN-NU16

Optional PSU for increasing

the brightness of the LEDs

LCN-KT8B

106