Scribd
Upload
58 views2 pages

Ps 1

This document contains an electrical engineering problem set with 5 problems related to digital communication topics like PAM systems, sampling rates, quantization, and bandwidth. Problem 1 involves a 32-level PAM system with a 4000 Hz analog signal and asks about the minimum bits per sample, sampling rate, bit rate, and bandwidth for both 32-level and binary PAM. Problem 2 involves an audio signal sampled at 1.5 times the Nyquist rate that is quantized for a 32-level PAM system, and asks about bandwidth, sampling frequency, bits per sample, power ratio, bit rate, and symbol rate. Problems 3-5 are not fully described.

Uploaded by

AbdulHaseebArif
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
58 views2 pages

Ps 1

This document contains an electrical engineering problem set with 5 problems related to digital communication topics like PAM systems, sampling rates, quantization, and bandwidth. Problem 1 involves a 32-level PAM system with a 4000 Hz analog signal and asks about the minimum bits per sample, sampling rate, bit rate, and bandwidth for both 32-level and binary PAM. Problem 2 involves an audio signal sampled at 1.5 times the Nyquist rate that is quantized for a 32-level PAM system, and asks about bandwidth, sampling frequency, bits per sample, power ratio, bit rate, and symbol rate. Problems 3-5 are not fully described.

Uploaded by

AbdulHaseebArif
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 2

Islamic University of Gaza Fall 2011

Electrical Engineering Dept. Digital communication


Eng. Alaa H. Abu Auda Problem set #1

Problem #1

The information in an analog waveform, whose maximum frequency fm=4000 Hz, is


to be transmitted using 32-level PAM system. The quantization distortion must not
exceed 1% of the peak to peak analog signal.

a. what is the minimum number of bits per sample.


b. What is the minimum required sampling rate, and what is the resulting bit rate
c. Calculate the bandwidth.
d. Calculate the bandwidth if Binary PAM is used
e. Find the ratio of the peak signal power to the peak quantization noise power in dB.

Problem #2

An audio signal is band limited to 4.5 kHz, this signal was sampled at 1.5 times the
Nyquest rate. The signal is quantized so that the ratio of the peak signal power to
the average quantization noise power is at least 50 db, if the signal is to be
transmitted over 32-aray PAM system find

a) The bandwidth of the audio signal ?


b) The sampling frequency ?
c) The minimum number of bits per sample or bits per level ?
d) The actual peak signal power to the average quantization noise power ratio in db ?
e) The bit rate and the symbol rate ?
f) If the quantization error has the following probability P(e)
density function, repeat part (c). 7/4q

1/4q

e
-q/2 0 q/4 q/2
Problem #3

Problem #4

Problem #5

With my best wishes


Eng:Alaa Abu Auda

You might also like