3508 470-847 bkW

Land Mechanical (680-1135 bhp)

Engine 1200-1900 rpm

CAT ENGINE SPECIFICATIONS

V-8, 4-Stroke-Cycle-Diesel
Emissions.. . . . . . . . . . . . . . . . . . . . . Not Emissions Certified
Peak Torque at Speed.. . . . . . . . . . . . . . . . . . . . . . 3137 lb-ft
Bore.. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 170 mm (6.7 in.)
Stroke. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 190 mm (7.5 in.)
Displacement.. . . . . . . . . . . . . . . . . . . . . 34.5 L (2107 cu. in.)
Aspiration.. . . . . . . . . . . . . . . . . . Turbocharged-Aftercooled
Governor and Protection.. . . . . . . . . . . . . . . . . . . . . . . W3161
Engine Weight, net dry (approx) . . . . . . 4309 kg (9500 lb.)
Capacity for Liquids
Lube Oil System (refill).. . . . . . . . . . 227.1 L (60 U.S. gal.)
Cooling System (engine only).. . . . . 103 L (27.2 U.S. gal.)
Cooling System (radiator).. . . . . . 160.1 L (42.3 U.S. gal.)
Oil Change Interval.. . . . . . . . . . . . . . . . . . . . . . . . . 500 hours
Rotation (from flywheel end). . . . . . . . . . Counterclockwise
Flywheel and Flywheel Housing.. . . . . . . . . . . . SAE No. 00
Flywheel Teeth. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 151

FEATURES
Engine Design Full Range of Attachments
- Proven reliability and durability Large variety of factory installed engine attachments
- Robust diesel strength design prolongs life and lowers reduces packaging time
owning and operating costs Testing
- Market-leading power density Every engine is full-load tested to ensure proper engine
- Designed to perform in oilfield conditions, including high performance.
ambient high altitude applications
Product Support Offered Through Global Cat Dealer
- Long overhaul life proven in oilfield applications
Network
- Core engine components designed for reconditioning
More than 2,200 dealer outlets
and reuse at overhaul
- Broad torque curve optimized for petroleum mechanical Cat factory-trained dealer technicians service every
drive application aspect of your petroleum engine
Cat parts and labor warranty
Improved Serviceability
Large inspection openings allow convenient access to Preventive maintenance agreements available for repair-
core engine internals before-failure options
SOSSM program matches your oil and coolant samples
Control System
- Woodward 3161 governor against Caterpillar set standards to determine:
- E-stop pushbutton on instrument panel - Internal engine component condition
- Air shutoff and explosion relief valves - Presence of unwanted fluids
- Extra alarm switches available for customer-supplied - Presence of combustion by-products
panel - Site-specific oil change interval
- Instrument panel LH analog display of key package Over 80 Years of Engine Manufacturing Experience
operation parameters Ownership of these manufacturing processes enables
Caterpillar to produce high quality, dependable products.
Reduction of Owning and Operating Costs
- Cast engine blocks, heads, cylinder liners, and flywheel
- Long filter change intervals, aligned with service
housings
intervals
- Machine critical components
- Torsional vibration analysis available from factory to
- Assemble complete engine
maximize component life
Web Site
Custom Packaging
For all your petroleum power requirements, visit .
For any petroleum application, trust Caterpillar to meet
www.catoilandgas.cat.com.
your exact needs with a factory custom package. Cat
engines, generators, enclosures, controls, radiators,
transmissions anything your project requires can be
custom designed and matched to create a one-of-a kind
solution. Custom packages are globally supported and
are covered by a one-year warranty after startup.

LEHW0058-00 Page 1 of 4
 3508 LAND MECHANICAL ENGINE
470-847 bkW (680-1135 bhp)

STANDARD EQUIPMENT
Air Inlet System Service meter electric
Aftercooler core corrosion resistant Tachometer
Air cleaner regular duty with soot filter Lube System
Service indicators Crankcase breather
Control System Oil cooler
Governor RH, 3161 Oil filter LH service
Pneumatic control (10-60 psi) Oil filler and dipstick LH service
Governor control positive locking Oil pan drain valve 2" NPT female connection
Cooling System Mounting System
Thermostats and housing for conventional core radiator Rails mounting, floor type 254 mm (10 in)
Jacket water pump gear-driven, centrifugal Power Take-Offs
Radiator Cooled Land Based Accessory drive upper RH
Outlet controlled thermostat and housing Front housing two-sided
Jacket water pump gear-driven Protection System
Exhaust System Junction box
Exhaust flexible fitting, adapter, flange Manual shutoff RH
Flywheels and Flywheel Housings Safety shutoff protection, energized to shutdown
Flywheel SAENo. 00, 151 teeth Low oil pressure
Flywheel housing SAENo. 00 Water temperature
Fuel System Overspeed
Fuel filter, with service indicator Starting System
Priming pump LH Air starting motor, RH, 620 to 1034 kPa (90 to 150 psi), .
Fuel transfer pump LH control
Flexible fuel lines Air silencer
Instrumentation General
Instrument panel LH Paint Cat yellow
Gauges engine oil pressure gauge, fuel pressure Vibration damper and guard
gauge, oil filter differential gauge, jacket water Lifting eyes
temperature gauge

OPTIONAL EQUIPMENT
Air Compressor Instrumentation
Air Inlet System Gauges and instrument panels
Air cleaners Lube System
Remote air inlet adapters Fumes disposal
Charging Systems Oil filters
Battery chargers and charging alternators Prelube pumps, sump pumps
Control System Power Take-Offs
Load sharing modules Flexible couplings, coupling hubs
Local speed throttle control Front accessory drives
Governor conversion Auxiliary drive shafts and pulleys
2301A speed control governors and actuator Front stub shaft and flywheel stub shaft
3161 mechanical governors Pulleys
Throttle position sensors Protection System
Cooling System Shutoffs
High gloss black folded core radiators and conventional . Switches and contactors
core radiators Explosion relief valves
Belt guard Oil pressure monitor
Blower fan Starting System
Fan drive and fan pulley Starting motors air, gas, electric
Radiator cover Air pressure regulators, controls and silencer
Water level switch gauge Air controls manual and electric
Coolant level sensors Redundant start systems
Air separator Start switch
Exhaust System Starting aids JW heater and ether injection
Flexible fitting, elbows Battery sets 24 volts with rack
Flange and exhaust expanders General
Mufflers Flywheel guard
Flywheel and Flywheel Housing Special paint
Fuel System
Fuel priming pumps, flexible fuel lines
Fuel filter primary
Fuel cooler, fuel level switch
LEHW0058-00 Page 2 of 4
 3508 LAND MECHANICAL ENGINE
470-847 bkW (680-1135 bhp)

PERFORMANCE curves*
Turbocharged-Aftercooled
566 bkW (760 bhp) @ 1200 rpm
DM2894-02

Torque 4598 3391

Nm
4569 3370

Torque
lb-ft
4541 3349
4512 3328

567 760
Engine Power

Engine Power
538 722

bhp
bkW

509 683
480 644

211 .348

lb/bhp-hr
g/bkW-hr

209 .344

BSFC
BSFC

207 .340
205 .336

1000 1050 1100 1150 1200 1250 1300

Engine Speed - rpm

Heat Rejection Data

Engine Speed Engine Power Rej to JW Rej to Atmos Rej to Exh From Aft Clr
rpm bkW bhp bkW Btu/min bkW Btu/min bkW Btu/min bkW Btu/min
1200 567.0 760.4 309 17573 92 5255 549 31222 57 3264
1150 552.1 740.4 296 16833 91 5187 524 29800 53 2991
1100 529.6 710.2 281 15980 90 5118 496 28207 47 2656
1050 504.5 676.5 264 15014 89 5039 465 26444 40 2280
1000 480.5 644.4 247 14047 87 4959 432 24568 33 1865

Approximate Power (bhp) as function of Altitude and Inlet Manifold Temperature for DM2894-02
Inlet Manifold Altitude (feet)
Temp. (F) 10,499 9843 8202 6562 4921 3281 1640 984 0
50 685 704 750 798 849 860 860 860 860
68 662 680 724 771 819 860 860 860 860
86 641 657 700 746 793 842 860 860 860
104 620 636 677 721 767 815 860 860 860
122 601 617 657 699 743 790 839 860 860
Normal 687 701 739 778 818 860 860 860 860

*Other ratings and performance data available.

LEHW0058-00 Page 3 of 4
 3508 LAND MECHANICAL ENGINE
470-847 bkW (680-1135 bhp)

land mechanical ENGINE

2136.14 mm 1701.80 mm
(84.1 in.) (67.0 in.)

1719.58 mm
(67.7 in.)

Right Side View Front View

Engine Dimensions Note: Do not use for installation design.

Length 2136.14 mm 84.1 in. See general dimension drawings for detail.
(Drawing #132-4873)
Width 1701.80 mm 67.0 in.
Height 1719.58 mm 67.7 in.
Engine Weight (dry) 4309 kg 9500 lb.

RATING definitions and CONDITIONS

IND-C (Intermittent) Fuel consumption has a tolerance of +5% and is based
Intermittent service where maximum power and/or speed on fuel oil of 35 API [16 C (60 F)] gravity having an LHV
are cyclic (time at full load not to exceed 50%). of 42 780 kJ/kg (18 390 Btu/lb) when used at 29 C .
Ratings are based on SAE J1995 standard conditions of (85 F) and weighing 838.9 g/liter (7.001 lbs/U.S. gal). .
100 kPa (29.61 in Hg) and 25 C (77 F). These ratings Fuel consumption shown with all oil, fuel, and water
also apply at ISO3046/1, DIN6271, and BS5514 standard pumps, engine driven.
conditions of 100 kPa (29.61 in Hg), 27 C (81 F), and
60% relative humidity. Ratings are valid for air cleaner inlet
temperatures up to and including 50 C (122 F).

Information contained in this publication may be considered confidential. Discretion is recommended when distributing.
Materials and specifications are subject to change without notice. The International System of Units (SI) is used in this publication.
CAT, CATERPILLAR, their respective logos, ADEM, SOS, Caterpillar Yellow and the Power Edge trade dress,
as well as corporate and product identity used herein, are trademarks of Caterpillar and may not be used without permission.

Performance Number: DM2894-02 2010 Caterpillar
LEHW0058-00 (4-10) All rights reserved.