Scribd
Upload
255 views2 pages

Data Sheet S690QL1

This document provides information on the material properties of S 690 QL 1 steel, including its minimum and maximum yield stress, tensile stress, elongation, impact values, and chemical composition based on steel plate thickness. Ranges and application details are given.

Uploaded by

wajdi
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
255 views2 pages

Data Sheet S690QL1

This document provides information on the material properties of S 690 QL 1 steel, including its minimum and maximum yield stress, tensile stress, elongation, impact values, and chemical composition based on steel plate thickness. Ranges and application details are given.

Uploaded by

wajdi
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 2

Material properties

Material S 690 QL 1 (European Union / EN)


Group Structural and constructional steels
Subgroup EN 10137-2 Plates and wide flats made of high yield strength structural steels

Comment Delivery conditions for quenched and tempered steels

Application -

Yield Stress[MPa]
Dimension Min Max Approx

Plates and wide flats; Quenched and tempered; >= 3 690 - -


<= 50 mm
Note: Yield stress is Upper Yield Stress (ReH)
Plates and wide flats; Quenched and tempered; > 50 650 - -
<= 100 mm
Note: Yield stress is Upper Yield Stress (ReH)
Plates and wide flats; Quenched and tempered; > 100 630 - -
<= 150 mm
Note: Yield stress is Upper Yield Stress (ReH)

Tensile Stress[MPa]
Dimension Min Max Approx

Plates and wide flats; Quenched and tempered; >= 3 770 940 -
<= 50 mm

Plates and wide flats; Quenched and tempered; > 50 760 930 -
<= 100 mm

Plates and wide flats; Quenched and tempered; > 100 710 900 -
<= 150 mm

Elongation A5 [%]
Dimension Min Max Approx

Plates and wide flats; Quenched and tempered; >= 3 14.0 - -


<= 50 mm

Plates and wide flats; Quenched and tempered; > 50 14.0 - -


<= 100 mm

Plates and wide flats; Quenched and tempered; > 100 14.0 - -
<= 150 mm

Page 1

All Rights Reserved 1999-2005 INI International


Impact [J]
Dimension Min Max Approx

Plates and wide flats; Quenched and tempered; >= 3 60 - -


<= 50 mm
Impact Test: Charpy V Notch; 0C; (long.)
Plates and wide flats; Quenched and tempered; > 50 60 - -
<= 100 mm
Impact Test: Charpy V Notch; 0C; (long.)
Plates and wide flats; Quenched and tempered; > 100 60 - -
<= 150 mm
Impact Test: Charpy V Notch; 0C; (long.)

Chemical Composition [%]

Criterion Min Max Approx

C - 0.2000 -

Si - 0.8000 -

Mn - 1.7000 -

P - 0.0200 -

S - 0.0100 -

Cr - 1.5000 -

Mo - 0.7000 -

Ni - 2.0000 -

V - 0.1200 -

Ti - 0.0500 -

Nb - 0.0600 -

Zr - 0.1500 -

Al - - 0.0180

B - 0.0050 -

Cu - 0.5000 -

N - 0.0150 -

Cross Reference Table

Material Standard Country

1.8988 EN European Union

1.8988 WN Germany

Page 2

All Rights Reserved 1999-2005 INI International

You might also like