CONTENTS

CONTENTS
SPECIFICATIONS.........................................................................................................................2
CIRCUIT OPERATIONAL DESCRIPTION.........................................................................................3
VOLTAGE CHARTS.....................................................................................................................12
CIRCUIT DIAGRAM...................................................................................................................13
PCB CIRCUIT BOARD.................................................................................................................22
WAVEFORMS............................................................................................................................32
TROUBLE SHOOTING.................................................................................................................37
INSTRUMENT DISASSEMBLY......................................................................................................42
PARTLIST...................................................................................................................................49

Sm(DAEWOO_DG-K51X)051229.indd 1 2005-12-30 11:46:56

 SPECIFICATIONS
Laser wavelength 650nm
Video PAL/AUTO/NTSC
Frequency response 20Hz ~ 20KHz (1dB)
Signal/noise ratio 90dB
Channel separation 85dB ( 1KHz)
Dynamic range 80dB ( 1KHz)
output level : 2.0 + 0/-0.2Vrms
Analog
Output (Load impedance : 1,0K)
Audio output level : 0.5 0.1Vp-p
Digital
(Load impedance : 75)
output level : 1.0 0.1Vp-p
Composite
(Load impedance : 75, imbalance, negative polarity)
Output output level : brightness(Luma) 1.0 0.1Vp-p Chromaticity (Color)
Video S-video 0.286 20%
(Load impedance : 75)
Component Y: 1Vp-p, Pb/Pr: 0.7Vp-p (Load impedance : 75)
Power 100-240V~, 50Hz~60Hz 12W
Body (W x H x D) 430 x 38 x 245 mm
Dimensiones
Packing 510 x 88 x 305 mm
Weight (Gross / Net) 2.9Kg / 2.2Kg

Notes : Design and specifications in this instruction manual are subjected to change with-
out prior notice toimprove quality and function.

DVD Audio output standards

Disc type
Output
DVD VIDEO-CD CD
Analogue Audio output 48/96KHz sampling 44.1KHz sampling 44.1KHz sampling
Digital Audio output 48KHz sampling 44.1KHz sampling 44.1KHz sampling

Sm(DAEWOO_DG-K51X)051229.indd 2 2005-12-30 11:46:57

 CIRCUIT OPERATIONAL DESCRIPTION
DVD Module
1. Summary
DVD One Board consists of: Loader part that reads and transmits audio and video data saved
at Optic Discs (DVD, CD-DA, VCD, CD-R) to MPEG Decoder part; MPEG Decoder part, which,
by decoding and encoding data received from the Loader, produces analog signals; and u-Com
that controls the overall system including the loader and MPEG decoder.

2. How Does it Operate

Insert the power cord and then power transmitted to each IC, and the SET will be the STAND-
BY status which requires the least power for input the front panel key, input the STAND BY/
ON key, extinguished the LED. Once the Power On key is entered, u-Com recognizes it and
initiates each chipset, performs sequential algorithms such as determining whether the disc
is in or not, and if in, what type of disc is loaded.
Through this process, it can read disc data before transmitting it to the MPEG Decoder. The
MPEG Decoder will then decode and encode such data before generating the final analog
audio and video signal outputs.

DVD-MODULE Block Diagram

Sm(DAEWOO_DG-K51X)051229.indd 3 2005-12-30 11:46:57

 CIRCUIT OPERATIONAL DESCRIPTION
3. Loader Part
The loader which read the data of audio/video from optic disc and transfer them to MPEG
decoder can be divided into Deck total DVD assay(in a short term, Mecha) and Servo. Mecha
mounts with the optical pick-up which allows reading the signal of a disc using laser beam
and makes it operates and consists of the deck mechanism which allows loading a disc and
reading the data. Servo is a sort of circuit which allows operating the loader and recovering
the data and consists of Motor Drive IC operating the spindle, the sled, the loading motor.

Loader Block Diagram

Sm(DAEWOO_DG-K51X)051229.indd 4 2005-12-30 11:46:58

 CIRCUIT OPERATIONAL DESCRIPTION
1) Motor Drive IC: AT5888S
The AT5888S is a 5-channel BTL driver IC for driving the motors and actuators in products
such as CD-ROM/DVD-ROM/DVD-Player drives. Two of the channels use current feedback to
minimize the current phase shift caused by the influence of load inductance. Driver IC gener-
ates the focus signal and the tracking signal for pick-up actuator, the sled signal for feed,
spindle signal and the load signal for opening and closing of the tray. The focus signal, the
tracking signal, the sled signal and the spindle signal are input into each relaxant port of
the drive IC(in the order of No. 26 pin, 23, 4, and 1) and set the gain amplification and the
center voltage through the internal OP-AMP and drive on both sides and then the focus sig-
nal and the tracking signal will be output as VOFC+, VOFC- and VOTK+, VOTK- on actuator,
the sled signal and the spindle signal will be output as VOSL+, VOSL- and VOLD+, VOLD- on
each motor. For the load signal the input opening/closing signal is output as VOTR+, VOTR-
through the loading PRE FWD REV circuit.

MUTE BIAS VINTK TRB_2 NC VINLD GND VCTL NC VCC2 VOLD- VOLD+ VOTK- VOTK+

28 27 26 25 24 23 22 21 20 19 18 17 16 15
GND PGND

Vcc2
10K
15K
MUTE
10K

+ - Spindle Actuator
-

+
Driver(4X) Driver(6x)
-

25K
+

Thermal
Shut down
Vcc2
Vcc2
Vcc1
25K 10K
+

-
+
-

25K Sled Actuator

+ Driver(4X) Driver(6x)
-

Pre-DRV TRAY
Vcc1
DRIVER
PGND
10K

1 2 3 4 5 6 7 8 9 10 11 12 13 14
VINFC TRB_1 REGO2 VINSL+ REGO1 FWD REV VCC1 VOTR- VOTR+ VOSL+ VOSL- VOFC- VOFC+

Motor Drive IC (AT5888S) Block Diagram

Sm(DAEWOO_DG-K51X)051229.indd 5 2005-12-30 11:46:59

 CIRCUIT OPERATIONAL DESCRIPTION
MPEG Decoder
The signal read from DVD disc is output into the RF signal and Servo related signal through
the RF IC and they are input into the MPEG decoder and processed the MPEG decoding
and divided into video/audio signal. The video signal is output into the analog audio signal
through the built-in encoder block and also the audio signal into the audio DAC through the
audio decoder block.
MPEG decoder consists of existing MPEG-2 decoder and single chip combined the digital sig-
nal processing part which is the core technology of DVD player with the Servo controller.

1) DVD Servo And MPEG-2 Decoder : MT1389D

MediaTek MT1389 is a DVD player system-on-chip (SOC) which incorporates advanced
features like high quality TV encoder and state-of-art de-interlace processing. The
MT1389 enables consumer electronics manufacturers to build high quality, cost-effec-
tive DVD players, portable DVD players or any other home entertainment audio/video
devices.
Based on MediaTeks world-leading DVD player SOC architecture, the MT1389 is the
3rd generation of the DVD player SOC. It integrates the MediaTek 2nd generation
front-end analog RF amplifier and the Servo/MPEG AV decoder.
The progressive scan of the MT1389D utilized advanced motion-adaptive de-interlace
algorithm to achieve the best movie/video playback. It also supports a 3:2 pull down
algorithm to give the best film effect. The 108MHz/12-bit video DAC provides users a
whole new viewing experience.

DVD Player System Diagram

Sm(DAEWOO_DG-K51X)051229.indd 6 2005-12-30 11:46:59

 CIRCUIT OPERATIONAL DESCRIPTION

MT1389 Functional Block Diagram

Sm(DAEWOO_DG-K51X)051229.indd 7 2005-12-30 11:47:00

 CIRCUIT OPERATIONAL DESCRIPTION
2) Flash Memory : MX29F040QC-70
This stores every program required for the operation of DVD player and holds the data of
OSD languages and LOGO and send them upon request from u-COM. This allows the update
of firmware by CD-R/RW. For DVD module, 8MBit Flash Memory on 512K x 16bit basis is
used.

Description
The MX29F040 is a 4-mega bit Flash memory organizedas 512K bytes of 8 bits. MX-
IC's Flash memories offerthe most cost-effective and reliable read/write non-volatile
random access memory. The MX29F040 is packaged in 32-pin PLCC, TSOP, PDIP. It is
designed to bereprogrammed and erased in system or in standardEPROM programmers.
The standard MX29F040 offers access time as fast as55ns, allowing operation of high-
speed microprocessorswithout wait states. To eliminate bus contention, theMX29F040
has separate chip enable (CE) and outputenable (OE) controls.
MXIC's Flash memories augment EPROM functionalitywith in-circuit electrical erasure
and programming. TheMX29F040 uses a command register to manage thisfunctional-
ity. The command register allows for 100%TTL level control inputs and fixed power
supply levels during erase and programming, while maintaining maxi-mum EPROM
compatibility.
MXIC Flash technology reliably stores memorycontents even after 100,000 erase and
programcycles. The MXIC cell is designed to optimize theerase and program mecha-
nisms. In addition, thecombination of advanced tunnel oxide processingand low in-
ternal electric fields for erase andprogramming operations produces reliable cycling.
The MX29F040 uses a 5.0V10% VCC supply toperform the High Reliability Erase and
autoProgram/Erase algorithms.
The highest degree of latch-up protection isachieved with MXIC's proprietary non-epi
process.Latch-up protection is proved for stresses up to 100milliamps on address and
data pin from -1V to VCC+ 1V.

Sm(DAEWOO_DG-K51X)051229.indd 8 2005-12-30 11:47:00

 CIRCUIT OPERATIONAL DESCRIPTION

WRITE
CONTROL PROGRAM/ERASE
CE STATE
INPUT
OE HIGH VOLTAGE MACHINE
WE LOGIC
(WSM)

STATE
X-DECODER

MX29F040
ADDRESS FLASH REGISTER

LATCH ARRAY

A0-A18 ARRAY
AND
SOURCE
Y-DECODER

BUFFER HV
Y-PASS GATE COMMAND
DATA
DECODER

SENSE PGM
AMPLIFIER DATA
HV
COMMAND
DATA LATCH

PROGRAM
DATA LATCH

Q0-Q7 I/O BUFFER

FLASH MX29F040QC-70 Block Diagram

Sm(DAEWOO_DG-K51X)051229.indd 9 2005-12-30 11:47:03

 CIRCUIT OPERATIONAL DESCRIPTION
3) EEPROM : AT24C16A
This stores the information related to setup of DVD menus. This can read and write the op-
tional information such as OSD, voice, language option after function for subtitle etc, the
aspect or method of TV display, video option like display function and audio, screen saver,
parental function through the I2C transmission method.
Description
The AT24C16A provides 16384 bits of serial electrically erasable and programmable
read only memory (EEPROM) organized as 2048 words of 8 bits each. The device is op-
timized for use in many industrial and commercial applications where low power and
low voltage operation are essential. The AT24C16A is available in space saving 8-lead
PDIP, 8-lead JEDEC SOIC, 8-lead MAP and 8-lead TSSOP packages and is accessed via a
2-wire serial interface. In addition, the entire family is available in 2.7V (2.7V to 5.5V)
and 1.8V (1.8V to 5.5V) versions.

10

Sm(DAEWOO_DG-K51X)051229.indd 10 2005-12-30 11:47:03

 CIRCUIT OPERATIONAL DESCRIPTION
4) SDRAM : M12L16161A-7T
This sends and receives data with MPEG decoder and performs the video signal processing.
Every video signal output from DVD player is once stored in SDRAM and then encoded in
MPEG decoder and finally output into the analog signal.
SDRAM applied to DVD module has the capacity of 16MBit(1048576 x 16bit x 1Bank), sends
and receives data with MPEG decoder by 16 bit.
Description
The M12L16161A is 16,777,216 bits synchronous high data rate Dynamic RAM orga-
nized as2 x 524,288 words by 16 bits, fabricated withhigh performance CMOS technol-
ogy. Synchronous design allows precise cycle control with theuse of system clock I/O
transactions are possibleon every clock cycle. Range of operating frequencies, program-
mable burst length and programmable latencies allow the same device to beuseful for
a variety of high bandwidth, high performance memory system applications.

SDROM M12L16161A-7T Block Diagram

11

Sm(DAEWOO_DG-K51X)051229.indd 11 2005-12-30 11:47:04

 VOLTAGE CHARTS

Power board output voltage

J1
Pin number 1 2 3 4 5 6 7 8 9
Output voltage GND S5V 3.3V D5V GND A5V GND +12V -12V

J2
Pin number 1 2 3 4 5 6
Output voltage SW F- F+ GND -24V STB5V

Decode board input voltage

CN1
Pin number 1 2 3 4 5 6 7 8 9
Output voltage GND S5V 3.3V D5V GND A5V GND +12V -12V

12

Sm(DAEWOO_DG-K51X)051229.indd 12 2005-12-30 11:47:05

 CIRCUIT DIAGRAM
1. POWER SUPPLY SCHEMATIC DIAGRAM

13

Sm(DAEWOO_DG-K51X)051229.indd 13 2005-12-30 11:47:06

 CIRCUIT DIAGRAM
2. DECODE BOARD SCHEMATIC DIAGRAM
1) INDEX SCHEMATIC DIAGRAM

14

Sm(DAEWOO_DG-K51X)051229.indd 14 2005-12-30 11:47:07

 CIRCUIT DIAGRAM
2) RF & MPEG SCHEMATIC DIAGRAM

15

Sm(DAEWOO_DG-K51X)051229.indd 15 2006-1-20 14:30:13

 CIRCUIT DIAGRAM
3) SDRAM & FLASH SCHEMATIC DIAGRAM

16

Sm(DAEWOO_DG-K51X)051229.indd 16 2005-12-30 11:47:14

 CIRCUIT DIAGRAM
4) VIDEO OUTPUT PORT SCHEMATIC DIAGRAM

17

Sm(DAEWOO_DG-K51X)051229.indd 17 2005-12-30 11:47:16

 CIRCUIT DIAGRAM
5) AUDIO OUTPUT PORT SCHEMATIC DIAGRAM

18

Sm(DAEWOO_DG-K51X)051229.indd 18 2006-1-20 14:30:16

 CIRCUIT DIAGRAM
3. CONTROL BOARD SCHEMATIC DIAGRAM

19

Sm(DAEWOO_DG-K51X)051229.indd 19 2005-12-30 11:47:24

 5 4 3 2 1

2 L1 C26 R26
5 1/2VCC
4
FB VCC
7 2.2UF/50V 1k

Sm(DAEWOO_DG-K51X)051229.indd
6 C27 R 27 1/2VCC
3 100P 10 0 K VCC
1
U 2A

20
MIC1
D 3 C30 D
2 L2 0 C21 R18
1
5 2 U 2B

4
4 4558 4.7UF/16V
FB
7 2.2UF/50V 1k 5 R21 1K C17 10UF/16V

8
6 C19 R16 R19 10K C33 10UF/16V 7
3 100P 100K VR1 6
1 A20K 2 4558
0

3
8
MIC2 R25 33 K R11 22K C15 4.7UF/50V R1 2

22 K
R24 1 00 K
C25 100P 0
0 C 24 100P 1
2
CIRCUIT DIAGRAM

2 2 3
C29 C28
4
C20 4.7UF/50V R2 10 K
1 1 CNS-4P
103 103 CN1

0 0

R9
C C
33 E

C12

U1 223
4.7UF/50V R20
0 VCC
C2 C15
R4 62 0 100 K
100UF/16V 1 16
3.3UF/50V
C6 222 R5 10 K 0 R31 C30 C16 C10
C3 22UF/25V 2 15 R 23
R6 2.7k C18 220UF/16V 0.1U
3 14 4 . 7K
10UF/16V 10 K
0 C7 22 2 R7 1 0k R17
4 TP5299 13

20
R8 620 C14 0
R1 5 12 C13 15k
C8 R10 10k 10 3 VR2

1
6 11 22 3 A20K
56 3 1/2VCC
4. MICROPHONE BOARD SCHEMATIC DIAGRAM

47k
7 10 2
C9 56 3

3
C4 8 9 0 C22 C23
C5 R29
10 4 K 0 100UF/16V 0.1U
104K 10 K
0
0
B B
0
0

3 E C 2

B
R3
Q1 1.5K

1
2SC1815

D1

1
6.8V
C1
22UF/25V

2
A A

Title
DV-3103 KARAOKE SCHEMATIC

Size Document Number Rev

A3 KGVG004 A1.1
Date: Saturday, March 12, 2005 Sheet 2 of 2
5 4 3 2 1

2005-12-30
11:47:25
 CIRCUIT DIAGRAM
5. YUV BOARD SCHEMATIC DIAGRAM

21

Sm(DAEWOO_DG-K51X)051229.indd 21 2005-12-30 11:47:26

 PCB CIRCUIT BOARD
1. POWER SUPPLY BOARD

22

Sm(DAEWOO_DG-K51X)051229.indd 22 2005-12-30 11:47:27

 PCB CIRCUIT BOARD
2. DECODE BOARD

23

Sm(DAEWOO_DG-K51X)051229.indd 23 2005-12-30 11:47:36

 PCB CIRCUIT BOARD

24

Sm(DAEWOO_DG-K51X)051229.indd 24 2005-12-30 11:47:40

 PCB CIRCUIT BOARD
3. CONTROL BOARD (DG-K512)

25

Sm(DAEWOO_DG-K51X)051229.indd 25 2005-12-30 11:47:41

 PCB CIRCUIT BOARD
CONTROL BOARD (DG-K514)

26

Sm(DAEWOO_DG-K51X)051229.indd 26 2005-12-30 11:47:41

 PCB CIRCUIT BOARD
CONTROL BOARD (DG-K515)

27

Sm(DAEWOO_DG-K51X)051229.indd 27 2005-12-30 11:47:42

 PCB CIRCUIT BOARD
CONTROL BOARD (DG-K518)

28

Sm(DAEWOO_DG-K51X)051229.indd 28 2005-12-30 11:47:42

 PCB CIRCUIT BOARD
4. MICROPHONE BOARD (DG-K512 and DG-K514)

29

Sm(DAEWOO_DG-K51X)051229.indd 29 2005-12-30 11:47:43

 PCB CIRCUIT BOARD
MICROPHONE BOARD (DG-K515)

30

Sm(DAEWOO_DG-K51X)051229.indd 30 2005-12-30 11:47:43

 PCB CIRCUIT BOARD
5. YUV OUTPUT BOARD

31

Sm(DAEWOO_DG-K51X)051229.indd 31 2005-12-30 11:47:44

 WAVEFORMS
1. VIDEO

CP3 Pin5 (COLOR BAR_VIDEO OUT) CVBS

2. AUDIO

CP3 Pin 7&8(1KHz_ AUDIO OUT)

32

Sm(DAEWOO_DG-K51X)051229.indd 32 2005-12-30 11:47:45

 WAVEFORMS

CP3 Pin6 (COAXIAL OUT)

3. SYSTEM WAVEFORMS

D3 Pin2 RESET & +3.3V ON/OFF

33

Sm(DAEWOO_DG-K51X)051229.indd 33 2005-12-30 11:47:46

 WAVEFORMS

U6 Pin38(SDRAM CLOCK)

CN4 Pin4(VSC) S-CLK

34

Sm(DAEWOO_DG-K51X)051229.indd 34 2005-12-30 11:47:46

 WAVEFORMS

CN4 Pin6 (VSD) SDATA-IN

CN4 Pin5 (VST) S-CS

35

Sm(DAEWOO_DG-K51X)051229.indd 35 2005-12-30 11:47:47

 WAVEFORMS

CN4 Pin 2(IR)

Y1 Pin1 (27MHz X-TAL)

36

Sm(DAEWOO_DG-K51X)051229.indd 36 2005-12-30 11:47:48

 TROUBLE SHOOTING
1. POWER CIRCUIT

NO POWER

YES

NO
POWER cord is ok Exchange POWER card

YES

NO Check
(+) Voltage of CA3
F1 ,LA1 ,DA1~DA4

YES

Switching NO Cheack
Waveform of U1 U1,LA2 ,ZDA2 ,DA6 ,U2

YES

Output voltage of NO
Replace bad parts
DB1~DB5

YES

NO
Check other parts Check LB1,LB2

37

Sm(DAEWOO_DG-K51X)051229.indd 37 2005-12-30 11:47:48

 TROUBLE SHOOTING
2. CONTROL BOARD CIRCUIT

NO LED display

YES

Is 5V obtained at NO Check pin#1 of J1

Pin#7,21 of U1

YES

Oscillation at NO Check R2, exchange U1

pin#1 of U1

YES

Is there KEY/SEG NO
Cheack PCB
signal?

YES

KEY output at NO
Check U1 pin #6~7
PORT of U1

YES YES

Check SEG/GRID output NO

at PORT of U1 Check U1 pin#8~27

NO

Exchange U1

38

Sm(DAEWOO_DG-K51X)051229.indd 38 2005-12-30 11:47:48

 TROUBLE SHOOTING
3. VIDEO CIRCUIT

NO CVBS & S-vidro &

component signal appear
YES

Is signal output from

Y3~Y6 of Net; check NO Check MPEG system
pin# 175, 179, 181, 182 module
of U2 (1389D)

YES

Is signal output from part NO

Q11, Q12, Q14, Q16, Check Triode
Q17 ,Q38

YES

Check PCB pattern

39

Sm(DAEWOO_DG-K51X)051229.indd 39 2005-12-30 11:47:49

 TROUBLE SHOOTING
4. AUDIO OUTPUT CIRCUIT

NO sound

YES

Audio Signal from NO

Replace the U2
pin#187,189 of U2

YES

Check inserted part:

Check audio signal from NO R58,C160,R223,R225,R226,
pin#1,7 of U17 R57,C167,R224 R227 R228,
U17 and Replace bad parts

YES

Check audio signal from NO Check inserted part:

pin#1,7 of U11 C237,R67,R122,
C238,R68,R131,U11 and
Replace bad parts
YES

Check parts: NO
Replace bad parts
C233,R201,Q36,L49,
C161,R123,Q18,L38,
C235,R203,L50,Q37,
C168,R132,L39,Q19

40

Sm(DAEWOO_DG-K51X)051229.indd 40 2005-12-30 11:47:49

 TROUBLE SHOOTING
5. MPEG BOARD

Check all Connectors

YES

CN1
Check +3.3v (Pin7) NO
Check +3.3v (Pin4.5.8) Check Power Circuit

YES

+1.8V regulator(Q6 Pin3) Check NO

that voltage is between 1.7v-1.9v Check soldering or replace it

YES

+3.3v regulator(FB L26) for NO

SDRAM(U6) Check +3.3V
Check soldering or replace it

YES

RESET Signal NO
Check C10 ,R1
D3

YES

MT1389 Crystal (Y1) NO

Check whether Y1 (27MHz) Check soldering or replace it
Oscillates

YES

Check R20 NO
Check soldering or replace it
1.3K resistor
<Bad soldering of R20 can make white and black screen
YES

Check soldering
Flash (IC U7) Check NO or reprogramming Flash
CE#(Pin26)&RST(Pin12)
&Adds line or replace it

YES

Check soldering of other parts

41

Sm(DAEWOO_DG-K51X)051229.indd 41 2005-12-30 11:47:49

 INSTRUMENT DISASSEMBLY
Perform all disassembly procedures in the order presented.
When reassembling, use the reverse procedure.
Make sure that all leads/ wiring are routed correctly when reassembling.

A. TOP COVER REMOVAL

2. Remove one screw

1. Remove one screw

3. Remove four screws,

remove top cover.

FIG. 1

42

Sm(DAEWOO_DG-K51X)051229.indd 42 2005-12-30 11:47:49

 INSTRUMENT DISASSEMBLY
B. FRONT PANEL DISASSEMBLY

Remove three hooks

Remove two hooks,

remove panel.

FIG. 2

43

Sm(DAEWOO_DG-K51X)051229.indd 43 2005-12-30 11:47:50

 INSTRUMENT DISASSEMBLY
C. DECODE BOARD DISASSEMBLY

Remove three screws

Remove two screws,

remove MPEG board.

FIG. 3

44

Sm(DAEWOO_DG-K51X)051229.indd 44 2005-12-30 11:47:50

 INSTRUMENT DISASSEMBLY
D. POWER SUPPLY BOARD DISASSEMBLY

Remove four screws,

remove power board.

FIG. 4

45

Sm(DAEWOO_DG-K51X)051229.indd 45 2005-12-30 11:47:50

 INSTRUMENT DISASSEMBLY
E. YUV OUTPUT BOARD DISASSEMBLY

Remove one screw,

remove YUV board.

FIG. 5

46

Sm(DAEWOO_DG-K51X)051229.indd 46 2005-12-30 11:47:51

 INSTRUMENT DISASSEMBLY
F. DVD LOADER DISASSEMBLY

Remove four screws,

remove DVD loader.

FIG. 6

47

Sm(DAEWOO_DG-K51X)051229.indd 47 2005-12-30 11:47:51

 INSTRUMENT DISASSEMBLY
G. REAR PANEL DISASSEMBLY

Remove one screw

Remove two screws,

remove rear panel.

FIG. 7

48

Sm(DAEWOO_DG-K51X)051229.indd 48 2005-12-30 11:47:51

 PARTSLIST
SET Material List
Code: 6020584 (DG-K512) Unit:pcs
No Part Code Part Name SPEC QTY Location
1 0900001 Battery 7# no Hg 2.0
2 1100001 Ferrite Core outside 28mm inside 16mm high 7.5mm 1.0 power cord need process
3 1270001 Tie black tie 120mm 1.0 for power cord
4 1270002 Tie nylon tie 80mm 3.0
5 1310141 Conn Wire 2.54double 9P*350mm,red white conn wire reverse 1.0
6 1350048 Power Cord 2pin UL report(outside 1.5m,350*15mm added ferrite core) 1.0
7 1360001 AV Cable audio 4pin red white cable 1.5m 1.0
8 1360002 AV Cable video 2pin yellow cable 1.5m 1.0
9 1640067 DVD Loader SANYO loader(DM3421iron housing(aishange)+SF-HD62FV 1.0
OPU+huimeiJS-03plastic housing )conn wire 0.5mm/24P 200mm,same
direction
10 2010087 CD Door GVG-4 CD door (silver ) 1.0
11 2300138 Mirror DG-K512(mirror face )black 1.0
12 2500001 Handle white handle 1.0
13 3000115 T/Cover GVG-2/4/5(silver )added DAEWOO 1.0
14 3010119 B/Cover GVG-2-MTK(SANYO loader)-yingfeiling power pcb 1.0
15 3020346 R/Panel DG-K512 2.0CH MTK1389D 4region 1.0
16 3500005 Screw BB3*8 3.0 audio 3
17 3500007 Screw BTPW3*6 7.0 T/Cover6,R/panel1
18 3500011 Screw BB3*10 1.0 YUV 1
19 3500058 Screw BM3*6 6.0 power pcb 4 MPEG PCB 2
20 3500066 Screw BTPW3*9 4.0 loader
21 3670003 Cushion thickness 1.0mm dia3mm 2.0
22 4050439 Gift Box DG-K512(Miami) 1.0
23 4500077 Pad Foam GVG-2 left faom 1.0
24 4500078 Pad Foam GVG-2 right foam 1.0
25 4500090 Pad Foam DVD small foam 200*40*23mm 1.0
26 4500093 Pad Foam DVD small foam 260*50*18mm 1.0 before panel
27 4600005 PE Bag manual PE bag 04*230*370mm 1.0
28 4600006 PE Bag remote control PE bag 04*80*260mm 1.0
29 4600029 PE Bag 350*500mm 1.0
30 5000047 Masking Tape 50mm*10mm 1.0 for conn wire (mpeg )
31 5000070 Aluminum Foil 100*15mm 1.0 for connwire of loader
Sheet
32 5300422 Manual GD-K512(english ,spanish ) 1.0
33 5420137 W/Card DAEWOO (DEAM-FL) 1.0 DEAM-FLup to buyersPO
34 5420138 W/Card DAEWOO (DEPASA) 1.0 DEPASA up to buyersPO
35 5440073 Cushion 3816 front cushion46.6*6.6*8mm(single has sticker )rigidity 64 2.0
36 5440074 Cushion 3816rear cushion dia 15.5mm,thickness 3mm(single has sticker)rigidity 2.0
64
37 5440108 Cushion 20x10x5mm(single has sticker )EVI rigidity 60 2.0 loader
38 5450002 PVC Sheet 90x70x0.5mmPVC(single has sticker ) 1.0 near transformer
39 5750046 Power PCB Assy GV-ICE2A0565A-LED-03 ( NO STANDBY) 1.0
40 5760021 YUV PCB Assy GV-PDV950YUV13 1.0
41 5780248 F/Panel Assy DG-K512 (silver ) 1.0
42 5800390 MPEG PCB Assy DG-K512 MTK1389D-MMTK010-B2-01 (5700234) SANYO 1.0 single stick mpeg
43 5900205 Remote Control RC501-A01-(DG-K512) 1.0

49

Sm(DAEWOO_DG-K51X)051229.indd 49 2005-12-30 11:47:52

 PARTSLIST
Code: 6020585 (DG-K514)
No Part Code Part Name SPEC QTY Location
1 0900001 Battery 7# no Hg 2.0
2 1100001 Ferrite Core outside 28mm inside 16mm high 7.5mm 1.0 power cord need process
3 1270001 Tie black tie 120mm 1.0 for power cord
4 1270002 Tie nylon tie 80mm 3.0
5 1310141 Conn Wire 2.54double 9P*350mm,red white conn wire reverse 1.0
6 1350048 Power Cord 2pin UL report (outside 1.5m 350*15mm with ferrite core ) 1.0
7 1360001 AV Cable audio 4pin red white cable 1.5m 1.0
8 1360002 AV Cable video 2pin yellow cable 1.5m 1.0
9 1640067 DVD Loader SANYO loader (DM3421 iron housing (aishang)+SF-HD62FV 1.0
OPU+HuiMei JS-03plastic housing)conn wire 0.5mm/24P
200mm,same direction
10 2010087 CD Door GVG-4 CD door (silver ) 1.0
11 2300139 Mirror DG-K514(mirror face ) black 1.0
12 2500001 Handle white handle 1.0
13 3000115 T/Cover GVG-2/4/5(silver)with DAEWOO 1.0
14 3010120 B/Cover GVG-4-MTK(SANYO loader)-yingfeoling power pcb 1.0
15 3020344 R/Panel DG-K514 2.0CH MTK1389D 4region 1.0
16 3500005 Screw BB3*8 3.0 audio 3
17 3500007 Screw BTPW3*6 7.0 T/Cover6,R/panel1
18 3500011 Screw BB3*10 1.0 YUV 1
19 3500058 Screw BM3*6 6.0 power pcb 4 MPEG PCB 2
20 3500066 Screw BTPW3*9 4.0 loader
21 3670003 Cushion thickness 1.0mm dia 3mm 2.0
22 4050440 Gift Box DG-K514(Miami) 1.0
23 4500077 Pad Foam GVG-2 left foam 1.0
24 4500078 Pad Foam GVG-2 right foam 1.0
25 4500090 Pad Foam DVD small foam 200*40*23mm 1.0 before panel
26 4500093 Pad Foam DVD small foam 260*50*18mm 1.0 above panel
27 4600005 PE Bag manual PE bag 04*230*370mm 1.0
28 4600006 PE Bag remote control PE bag 04*80*260mm 1.0
29 4600029 PE Bag poly bag 350*500mm 1.0
30 5000047 Masking Tape 50mm*10mm 1.0 for conn wire (mpeg )
31 5000070 Aluminum Foil 100*15mm 1.0 for connwire of loader
Sheet
32 5300423 Manual GD-K514(english ,spanish ) 1.0
33 5420137 W/Card DAEWOO (DEAM-FL)model according to buyers require 1.0 DEAM-FL for PO
34 5420138 W/Card DAEWOO (DEPASA)model according to buyers require 1.0 DEPASA for PO
35 5440073 Cushion 3816front cushion46.6*6.6*8mm(single has sticker)rigidity 64 2.0
36 5440074 Cushion 3816rear cushion dia 15.5mm,thickness3mm(single has sticker)rigidity 2.0
64
37 5440111 Cushion 20x10x4mm(single has sticker)EVI rigidity60 2.0 loader
38 5450002 PVC Sheet 90x70x0.5mmPVC(single has sticker) 1.0 near transformer
39 5450111 PVC Sheet 100x20x0.65mmPVC(single has sticker) 1.0 under Mic PCB
40 5750046 Power PCB Assy GV-ICE2A0565A-LED-03 ( NO STANDBY) 1.0
41 5760021 YUV PCB Assy GV-PDV950YUV13 1.0
42 5780249 F/Panel Assy DG-K514 (silver) 1.0
43 5800391 MPEG PCB Assy DG-K514 MTK1389D-MMTK010-B2-01 (5700234) SANYO 1.0 single stick mpeg
44 5900205 Remote Control RC501-A01-(DG-K512) 1.0

50

Sm(DAEWOO_DG-K51X)051229.indd 50 2005-12-30 11:47:53

 PARTSLIST
Code: 6020586 (DG-K515)
No Part Code Part Name SPEC QTY Location
1 0900001 Battery 7# no Hg 2.0
2 1100001 Ferrite Core outside 28mm inside 16mm high 7.5mm 1.0 power cord need process
3 1270001 Tie black tie 120mm 1.0 for power cord
4 1270002 Tie nylon tie 80mm 3.0
5 1310141 Conn Wire 2.54double 9P*350mm,red white conn wire reverse 1.0
6 1350048 Power Cord 2pin UL report (outside 1.5m 350*15mm with ferrite core ) 1.0
7 1360001 AV Cable audio 4pin red white cable 1.5m 1.0
8 1360002 AV Cable video 2pin yellow cable 1.5m 1.0
9 1640067 DVD Loader SANYO loader (DM3421 iron housing (aishang)+SF-HD62FV 1.0
OPU+HuiMei JS-03plastic housing)conn wire 0.5mm/24P 200mm,same
direction
10 2010087 CD Door GVG-4 CD door (silver ) 1.0
11 2300140 Mirror DG-K515(mirror face ) black 1.0
12 2500001 Handle white handle 1.0
13 3000115 T/Cover GVG-2/4/5(silver)with DAEWOO 1.0
14 3010121 B/Cover GVG-5-MTK(SANYO loader)-yingfeoling power pcb 1.0
15 3020345 R/Panel DG-K515 2.0CH MTK1389D 4region 1.0
16 3500005 Screw BB3*8 3.0 audio 3
17 3500007 Screw BTPW3*6 7.0 T/Cover6,R/panel1
18 3500011 Screw BB3*10 1.0 YUV 1
19 3500058 Screw BM3*6 6.0 power pcb 4 MPEG PCB 2
20 3500066 Screw BTPW3*9 4.0 loader
21 3670003 Cushion thickness 1.0mm dia 3mm 2.0
22 4050434 Gift Box DG-K515(Miami) 1.0
23 4500077 Pad Foam GVG-2 left foam 1.0
24 4500078 Pad Foam GVG-2 right foam 1.0
25 4500090 Pad Foam DVD small foam 200*40*23mm 1.0 before panel
26 4500093 Pad Foam DVD small foam 260*50*18mm 1.0 above panel
27 4600005 PE Bag manual PE bag 04*230*370mm 1.0
28 4600006 PE Bag remote control PE bag 04*80*260mm 1.0
29 4600029 PE Bag poly bag350*500mm 1.0
30 5000047 Masking Tape 50mm*10mm 1.0 for conn wire (mpeg )
31 5000070 Aluminum Foil 100*15mm 1.0 for connwire of loader
Sheet
32 5300419 Manual DG-K515(english ,spanish ) 1.0
33 5420137 W/Card (DEAM-FL)model according to buyers require 1.0 DEAM-FL for PO
34 5420138 W/Card DEAWOO (DEPASA)model according to buyers require 1.0 DEPASA for PO
35 5440073 Cushion 3816front cushion 46.6*6.6*8mm(single has sticker)rigidity 64 2.0
36 5440074 Cushion 3816rear cushion dia 15.5mm,thickness3mm(single has sticker)rigidity 2.0
64
37 5440111 Cushion 20x10x4mm(single has sticker)EVI rigidity 60 2.0 loader
38 5450002 PVC Sheet 90x70x0.5mmPVC(single has sticker) 1.0 near transformer
39 5450112 PVC Sheet 81x68x0.65mmPVC(single has sticker) 1.0 under Mic PCB
40 5750046 Power PCB Assy GV-ICE2A0565A-LED-03 ( NO STANDBY) 1.0
41 5760021 YUV PCB Assy GV-PDV950YUV13 1.0
42 5780250 F/Panel Assy DG-K515 (silver) 1.0
43 5800392 MPEG PCB Assy DG-K515 MTK1389D-MMTK010-B2-01 (5700234) SANYO 1.0 single stick mpeg
44 5900205 Remote Control RC501-A01-(DG-K512) 1.0

51

Sm(DAEWOO_DG-K51X)051229.indd 51 2005-12-30 11:47:55

 PARTSLIST
Code: 6020643 (DG-K518)
No Part Code Part Name SPEC QTY Location
1 0900001 Battery 7# no Hg 2.0
2 1100001 Ferrite Core outside 28mm inside 16mm high 7.5mm 1.0 power cord need process
3 1270001 Tie black tie 120mm 1.0 for power cord
4 1270002 Tie nylon tie 80mm 3.0
5 1310141 Conn Wire 2.54double 9P*350mm,red white conn wire reverse 1.0
6 1350075 Power Cord 2pin IMQ report (nianwei)(outside 1.5m 350butoon 15mm with ferrite 1.0
core )
7 1360001 AV Cable audio 4pin red white cable 1.5m 1.0
8 1360002 AV Cable video 2pin yellow cable 1.5m 1.0
9 1640072 DVD Loader samsung loader (housing RT616X+OPU DL3CH)conn wire 0.5mm/24P 1.0
200mm same direction
10 2010056 DVD door GV-2802 CD door (bright color 3815) 1.0
11 2300155 Mirror DG-K518 left mirror(coffee)(with Progressive scan) 1.0
12 2300166 Mirror DG-K518 LED mirror(coffee) 1.0
13 2500001 Handle white handle 1.0
14 3000123 T/Cover GVG-3/6/7/8/9(silver)added new DAEWOO 1.0
15 3010134 B/Cover GVG-8-MTK(samsung )- yingfeiling power pcb 1.0
16 3020343 R/Panel DG-K518(Chile) 2.0CH MTK1389D third edition 1.0
17 3500005 Screw BB3*8 3.0 audio 3
18 3500007 Screw BTPW3*6 7.0 T/Cover6,R/panel1
19 3500011 Screw BB3*10 1.0 YUV 1
20 3500058 Screw BM3*6 6.0 power pcb 4 MPEG PCB 2
21 3500066 Screw BTPW3*9 4.0 loader
22 3670003 Cushion thickness 1.0mm dia 3mm 2.0
23 4050538 Gift Box DG-K518(Chile) 1.0
24 4500077 Pad Foam GVG-2 left foam 1.0
25 4500078 Pad Foam GVG-2 right foam 1.0
26 4500093 Pad Foam DVD small foam 260*50*18mm 1.0 aboce panel
27 4600005 PE Bag manual PE bag 04*230*370mm 1.0
28 4600029 PE Bag poly bag 350*500mm 1.0
29 5000047 Masking Tape 50mm*10mm 1.0 for conn wire (base )
30 5202385 Label DG-K518(Chile)bar code label 1.0
31 5300530 Manual DG-K518 1.0
32 5420168 W/Card DAEWOO peru W/Card 4edition 1.0
33 5440073 Cushion 3816 front cushion 46.6*6.6*8mm(single has sticker) rigidity64 2.0
34 5440074 Cushion 3816rear cushion 15.5mm,thickness 3mm(single has sticker)rigidity 64 2.0
35 5440129 Cushion 20x10x2mm(single has sticker)EVI rigidity 60 2.0 loader
36 5450002 PVC Sheet 90x70x0.5mmPVC(single has sticker) 1.0 near transformer
37 5750046 Power PCB Assy GV-ICE2A0565A-LED-03 ( NO STANDBY) 1.0
38 5760021 YUV PCB Assy GV-PDV950YUV13 1.0
39 5780278 F/Panel Assy DG-K518 (silver) 1.0
40 5800428 MPEG PCB Assy DG-K518 MTK1389D-MMTK010-B3-03 (5700255) SAMAUNG 1.0 single stick mpeg
41 5900205 Remote Control RC501-A01-(DG-K512) 1.0

52

Sm(DAEWOO_DG-K51X)051229.indd 52 2005-12-30 11:47:55

 PARTSLIST
MPEG PCB Assy Material List
Code: 5700234 (DG-K512/DG-K514/DG-K515)
No Part Code Part Name SPEC QTY Location
1 0050001 R Chip 1/16w 0E 5% 0603 19.0 R4,R7,R15,R16,R24,R25,R26,R32,R33,R34,R37,R50,R53,R61,R8
1,R57,R58,R122,R131
2 0050002 R Chip 1/16w 10E 5% 0603 2.0 R27,R190
3 0050004 R Chip 1/16w 33E 5% 0603 4.0 R71,R72,R73,R74
4 0050006 R Chip 1/16w 75E 5% 0603 3.0 R114,R182,R189
5 0050007 R Chip 1/16w100E 5% 0603 1.0 R113
6 0050008 R Chip 1/16w110E 5% 0603 1.0 R115
7 0050010 R Chip 1/16w160E 5% 0603 12.0 R82,R89,R92,R100,R102,R104,R109,R111,R241,R242,R246,R24
7
8 0050013 R Chip 1/16w220E 5% 0603 2.0 R121,R248
9 0050019 R Chip 1/16w 1K 5% 0603 7.0 R28,R126,R135,R196,R193,R123,R132
10 0050021 R Chip 1/16w2.2K 5% 0603 6.0 R177,R181,R183,R184,R185,R188
11 0050023 R Chip 1/16w3.3K 5% 0603 2.0 R223,R224,
12 0050026 R Chip 1/16w4.7K 5% 0603 5.0 R22,R161,R187,R192,R194
13 0050028 R Chip 1/16w 10K 5% 0603 21.0 R1,R21,R230,R231,R40,R54,R56,R59,R62,R75,R79,R160,R167,R
225,R227,R226,R228,R64,R66,R63,R65
14 0050031 R Chip 1/16w 15K 5% 0603 2.0 R47,R12
15 0050033 R Chip 1/16w 20K 5% 0603 1.0 R48
16 0050034 R Chip 1/16w 22K 5% 0603 2.0 R129,R120
17 0050036 R Chip 1/16w100K 5% 0603 11.0 R8,R17,R125,R134,R162,R171,R191,R197,R198,R229,R232
18 0050042 R Chip 1/16w6.8K 5% 0603 1.0 R175
19 0050044 R Chip 1/16w6.8E 5% 0603 1.0 R13
20 0050049 R Chip 1/16w 27K 5% 0603 1.0 R45
21 0050050 R Chip 1/16w 22E 5% 0603 2.0 R117,R116
22 0050051 R Chip 1/16w 1E 5% 0603 5.0 R19,R41,R42,R43,R44
23 0050053 R Chip 1/16w4.7E 5% 0603 2.0 R38,R39
24 0050054 R Chip 1/16w750K 5% 0603 1.0 R5
25 0050055 R Chip 1/16w8.2K 5% 0603 1.0 R3
26 0050056 R Chip 1/16w680E 5% 0603 2.0 R77,R78
27 0050077 R Chip 1/16w 13K 5% 0603 2.0 R118,R128
28 0050079 R Chip 1/16w 9.1K5% 0603 2.0 R67,R68
29 0050080 R Chip 1/16w 24K 5% 0603 1.0 R46
30 0050097 R Chip 1/16w1.2K 5% 0603 1.0 R20
31 0050110 R Chip 1/16w 150K 5% 0603 2.0 R9,R10
32 0050133 R Chip 1/16w 56E 5% 0603 6.0 R206,R207,R208,R80,R107,R85
33 0050135 R Chip 1/16w 180K 5% 0603 2.0 R124,R133
34 0050136 R Chip 1/16w 680K 5% 0603 2.0 R6,R11
35 0050140 R Chip 1/16w 150E 1% 0603 4.0 R86,R97,R94,R108
36 0050156 R Chip 1/16w 4.42K 1% 0603 1.0 R2
37 0060002 R Chip Array 1/16w33E*45% 0603 1.0 RN1
38 0190007 C Electro 25V 470UF 20% D8 1.0 C205
39 0190013 C Electro 16V 220UF 20% D6 8.0 C2,C8,C11,C13,C17,C19,C104,C113
40 0190022 C Electro 16V 47UF 20% D5 10.0 C52,C53,C54,C74,C97,C75,C120,C122,C143,C94
41 0190030 C Electro 16V 100UF 20% D5 4.0 C40,C66,C70,C185
42 0190033 C Electro 25V 10UF 20% D5 13.0 C10,C33,C23,C29,C32,C154,C160,C161,C167,C168,C231,C237,
C238
43 0190077 C Electro 10V 1000UF 20% D8 1.0 C99
44 0190106 C Electro 25V 220UF 20% D6.3X14 3.0 C3,C4,C206
45 0200003 C Chip 22P 50V 10% 0603 1.0 C232
46 0200004 C Chip 102 50V 10% 0603 6.0 C37,C207,C208,C162,C169,C39

53

Sm(DAEWOO_DG-K51X)051229.indd 53 2005-12-30 11:47:56

 PARTSLIST
No Part Code Part Name SPEC QTY Location
47 0200005 C Chip 27P 50V 10% 0603 1.0 C156
48 0200008 C Chip 101 50V 10% 0603 3.0 C67,C209,C230
49 0200014 C Chip 471 50V 10% 0603 4.0 C127,C131,C129,C132
50 0200015 C Chip 153 50V 10% 0603 1.0 C90
51 0200016 C Chip 333 50V 10% 0603 1.0 C45
52 0200017 C Chip 103 50V 10% 0603 1.0 C26
53 0200021 C Chip 1U 10V 10% 0603 4.0 C59,C60,C61,C63
54 0200031 C Chip 473 50V 10% 0603 2.0 C47,C46
55 0200032 C Chip 222 50V 10% 0603 3.0 C21,C27,C36,
56 0200041 C Chip 152 50V 10% 0603 1.0 C34
57 0201006 C Chip 391 50V 5% 0603 1.0 C20
58 0201009 C Chip 20P 50V 5% 0603 3.0 C31,C163,C170
59 0201011 C Chip 331 50V 5% 0603 2.0 C88,C87
60 0201012 C Chip 33P 50V 5% 0603 4.0 C51,C50,C157,C166
61 0201014 C Chip 121 50V 5% 0603 1.0 C65
62 0201017 C Chip 682 50V 5% 0603 1.0 C42
63 0201033 C Chip 47P 50V 5% 0603 10.0 C133,C134,C141,C142,C149,C150,C242,C243,C248,C249
64 0202001 C Chip 0.1U 50V +80%-20% 0603 75.0 C1,C5~C7,C9,C12,C14,C18,C24,C25,C28,C30,C38,C41,C4
4,C48,C49,C55~C58,C62,C68,C69,C71,C73,C76~C86,C89,
C91~C93,C95,C96,C98,C105~~C112,C114~C119,C121,C12
3~C126,C144,C153,C155,C194,C202,C186,C187,C188,C192
,C193,C210,C211
65 0250018 Coil (0805)10UH((SDFL2012S100KT) 2.0 L18,L19
66 0250020 Coil (0805)1.8UH(SDFL2012Q1R8KT) 6.0 L10,L21,L31,L35,L36,L37
67 0250028 Coil 0805 FB(PZ2012U601-2ROT) 22.0 L1,L2,L3,L4,L5,L6,L8,L9,L11,L12,L13,L16,L17,L26,L27,L29,L32,L3
8,L39,L44,L45,L46
68 0250072 Coil (0805)2.7UH(SDFL2012Q2R7KT) 1.0 L14
69 0250089 Coil 330UH 10% 1.0 L15
70 0320006 Diode 1N4001 1.0 D1
71 0390001 Diode Chip 1N4148 17.0 D3,D5,D7,D9,D11,D12,D13,D14,D15,D16,D17,D18,D19,D21~D2
4
72 0450017 TR S8550 (DIP EBC) 1.0 Q6
73 0460001 TR Chip 2N3904 4.0 Q18,Q19,Q35,Q1
74 0460006 TR Chip SS8550 (SOT23) 3.0 Q5,Q4,Q31
75 0460007 TR Chip 2N3906 (SOT23) 10.0 Q11,Q14,Q16,Q17,Q22,Q23,Q32,Q33,Q38,Q39
76 0460008 TR Chip SS8050 (SOT23) 2.0 Q29,Q28
77 0460009 TR Chip 2SK3018 (SOT23) 2.0 Q2,Q3
78 0510042 IC M12L16161A-7T (1*16M) 1.0 U5
79 0510072 IC AT24C16+5V(SOP) 1.0 U9
80 0510130 IC F4558S (SOP) 2.0 U11,U17
81 0510343 IC MX29F040QC-70 PLCC 5V 1.0 U12
82 0510413 IC MT1389QE REV:D 1.0 U2
83 0510496 IC AM5888S HSOP28 1.0 U3
84 0610010 Crystal 27MHz 27P (HC-49/S) 1.0 Y1
85 1000424 PCB MMTK010 REV:B3.4 MPEG 1.0
86 1150003 Conn Wafer XH-4Pin 2.54mm 1.0 CN9
87 1150005 Conn Wafer XH-6Pin 2.54mm 1.0 CN4
88 1150035 Conn Wafer XH-6Pin 2.0mm 1.0 CN7
89 1150037 Conn Wafer XH-4Pin 2.0mm 1.0 CN6
90 1150042 Conn Wafer XH-11Pin 2.0mm 1.0 CN3
91 1150043 Conn Wafer XH-9Pin 2.54mm 1.0 CN1
92 1150105 Conn Wafer Optical terminal TX179AFT 1.0 CP4
93 1150106 Conn Wafer 4pin AV4-8.4-13D 1.0 CP3

54

Sm(DAEWOO_DG-K51X)051229.indd 54 2005-12-30 11:47:58

 PARTSLIST
No Part code Part Name SPEC QTY Location
94 1150115 Conn Wafer S-video (plus fixed pin)DSW-007 1.0 CP1
95 1150186 Conn Wafer FPC upright /-24Pin 0.5mm plus 1.0 CN5(towards PCB inside)
iron cover

55

Sm(DAEWOO_DG-K51X)051229.indd 55 2005-12-30 11:47:58

 PARTSLIST
Code: 5700255 (DG-K518)
No Part Code Part Name SPEC QTY Location
1 0050001 R Chip 1/16w 0E 5% 0603 19.0 R4,R7,R15,R16,R24,R25,R26,R37,R50,R53,R61,R81,R57,R58,R122,
R131,R33,R34,R32
2 0050002 R Chip 1/16w 10E 5% 0603 1.0 R27
3 0050004 R Chip 1/16w 33E 5% 0603 4.0 R71,R72,R73,R74
4 0050006 R Chip 1/16w 75E 5% 0603 3.0 R114,R182,R189
5 0050007 R Chip 1/16w100E 5% 0603 1.0 R113
6 0050008 R Chip 1/16w110E 5% 0603 1.0 R115
7 0050010 R Chip 1/16w160E 5% 0603 12.0 R82,R89,R92,R100,R102,R104,R109,R111,R241,R242,R246,R247
8 0050013 R Chip 1/16w220E 5% 0603 2.0 R121,R248
9 0050019 R Chip 1/16w 1K 5% 0603 5.0 R28,R123,R126,R132,R135
10 0050021 R Chip 1/16w2.2K 5% 0603 6.0 R177,R181,R183,R184,R185,R188
11 0050023 R Chip 1/16w3.3K 5% 0603 2.0 R223,R224,
12 0050026 R Chip 1/16w4.7K 5% 0603 3.0 R22,R161,R187
13 0050028 R Chip 1/16w 10K 5% 0603 21.0 R1,R21,R230,R231,R40,R54,R56,R59,R62,R75,R79,R160,R167,R22
5,R227,R226,R228,R64,R66,R63,R65
14 0050031 R Chip 1/16w 15K 5% 0603 1.0 R12
15 0050032 R Chip 1/16w 18K 5% 0603 1.0 R47
16 0050033 R Chip 1/16w 20K 5% 0603 1.0 R48
17 0050036 R Chip 1/16w100K 5% 0603 8.0 R8,R17,R125,R134,R162,R171,R229,R232
18 0050042 R Chip 1/16w6.8K 5% 0603 1.0 R175
19 0050044 R Chip 1/16w6.8E 5% 0603 1.0 R13
20 0050050 R Chip 1/16w 22E 5% 0603 2.0 R117,R116
21 0050051 R Chip 1/16w 1E 5% 0603 5.0 R19,R41,R42,R43,R44
22 0050052 R Chip 1/16w 33K 5% 0603 1.0 R45
23 0050053 R Chip 1/16w4.7E 5% 0603 2.0 R38,R39
24 0050054 R Chip 1/16w750K 5% 0603 1.0 R5
25 0050055 R Chip 1/16w8.2K 5% 0603 1.0 R3
26 0050056 R Chip 1/16w680E 5% 0603 2.0 R77,R78
27 0050077 R Chip 1/16w 13K 5% 0603 2.0 R118,R128
28 0050079 R Chip 1/16w 9.1K5% 0603 2.0 R68,R67
29 0050097 R Chip 1/16w1.2K 5% 0603 1.0 R20
30 0050110 R Chip 1/16w 150K 5% 0603 2.0 R9,R10
31 0050133 R Chip 1/16w 56E 5% 0603 6.0 R206,R207,R208,R80,R107,R85
32 0050135 R Chip 1/16w 180K 5% 0603 2.0 R124,R133
33 0050136 R Chip 1/16w 680K 5% 0603 2.0 R6,R11
34 0050140 R Chip 1/16w 150E 1% 0603 4.0 R86,R97,R94,R108
35 0050157 R Chip 1/16w 4.7K 1% 0603 1.0 R2
36 0050160 R Chip 1/16w 30K 5% 0603 1.0 R46
37 0060002 R Chip Array 1/16w33E*45% 0603 1.0 RN1
38 0190007 C Electro 25V 470UF 20% D8 1.0 C205
39 0190013 C Electro 16V 220UF 20% D6 8.0 C2,C8,C11,C13,C17,C19,C104,C113
40 0190022 C Electro 16V 47UF 20% D5 10.0 C52,C53,C54,C74,C97,C75,C120,C122,C143,C94
41 0190030 C Electro 16V 100UF 20% D5 4.0 C40,C66,C70,C185
42 0190033 C Electro 25V 10UF 20% D5 12.0 C10,C33,C23,C29,C32,C154,C160,C161,C167,C168,C237,C238
43 0190077 C Electro 10V 1000UF 20% D8 1.0 C99
44 0190106 C Electro 25V 220UF 20% D6.3X14 3.0 C3,C4,C206
45 0200004 C Chip 102 50V 10% 0603 6.0 C37,C207,C208,C162,C169,C39
46 0200005 C Chip 27P 50V 10% 0603 1.0 C156
47 0200008 C Chip 101 50V 10% 0603 3.0 C67,C209,C230
48 0200014 C Chip 471 50V 10% 0603 4.0 C127,C131,C129,C132
49 0200015 C Chip 153 50V 10% 0603 1.0 C90
50 0200016 C Chip 333 50V 10% 0603 1.0 C45

56

Sm(DAEWOO_DG-K51X)051229.indd 56 2005-12-30 11:48:00

 PARTSLIST
No Part Code Part Name SPEC QTY Location
51 0200017 C Chip 103 50V 10% 0603 1.0 C26
52 0200021 C Chip 1U 10V 10% 0603 5.0 C59,C60,C61,C63,C64
53 0200031 C Chip 473 50V 10% 0603 2.0 C47,C46
54 0200032 C Chip 222 50V 10% 0603 3.0 C21,C27,C36,
55 0200041 C Chip 152 50V 10% 0603 1.0 C34
56 0201006 C Chip 391 50V 5% 0603 1.0 C20
57 0201009 C Chip 20P 50V 5% 0603 3.0 C31,C163,C170
58 0201011 C Chip 331 50V 5% 0603 2.0 C88,C87
59 0201012 C Chip 33P 50V 5% 0603 4.0 C51,C50,C157,C166
60 0201017 C Chip 682 50V 5% 0603 1.0 C42
61 0201033 C Chip 47P 50V 5% 0603 10.0 C133,C134,C141,C142,C149,C150,C242,C243,C248,C249
62 0202001 C Chip 0.1U 50V +80%-20% 0603 75.0 C1,C5~C7,C9,C12,C14,C18,C24,C25,C28,C30,C38,C41,C44,C48,C
49,C55~C58,C62,C68,C69,C71,C73,C76~C86,C89,C91~C93,C95,
C96,C98,C105~~C112,C114~C119,C121,C123~C126,C144,C153,
C155,C194,C202,C186,C187,C188,C192,C193,C210,C211
63 0250018 Coil (0805)10UH((SDFL2012S100KT) 2.0 L18,L19
64 0250020 Coil (0805)1.8UH(SDFL2012Q1R8KT) 6.0 L10,L21,L31,L35,L36,L37
65 0250028 Coil 0805 FB(PZ2012U601-2ROT) 19.0 L1,L2,L3,L4,L5,L6,L8,L9,L11,L12,L13,L16,L17,L26,L27,(L28(5V)orL29
(3.3V)Flash),L32,L38,L39
66 0250072 Coil (0805)2.7UH(SDFL2012Q2R7KT) 1.0 L14
67 0250089 Coil 330UH 10% 1.0 L15
68 0320006 Diode 1N4001 1.0 D1
69 0390001 Diode Chip 1N4148 17.0 D3,D5,D7,D9,D11,D12,D13,D14,D15,D16,D17,D18,D19,D21,D22,D
23,D24
70 0450017 TR S8550 (DIP EBC) 1.0 Q6
71 0460001 TR Chip
2N3904 3.0 Q1,Q18,Q19
72 0460006 TR Chip
SS8550 (SOT23) 3.0 Q5,Q4,Q31
73 0460007 TR Chip
2N3906 (SOT23) 9.0 Q11,Q14,Q16,Q17,Q22,Q23,Q32,Q38,Q39
74 0460008 TR Chip
SS8050 (SOT23) 2.0 Q29,Q28
75 0460009 TR Chip
2SK3018 (SOT23) 2.0 Q2,Q3
76 0510042 IC M12L16161A-7T (1*16M) 1.0 U5
77 0510072 IC AT24C16+5V(SOP) 1.0 U9
78 0510130 IC F4558S (SOP) 2.0 U11,U17
79 0510343 IC MX29F040QC-70 PLCC 5V 1.0 U12
80 0510413 IC MT1389QE REV:D 1.0 U2
81 0510496 IC AM5888S HSOP28 1.0 U3
82 0610010 Crystal
27MHz 27P (HC-49/S) 1.0 Y1
83 1000424 PCB MMTK010 REV:B3.4 MPEG PCB 1.0
84 1150005 Conn Wafer
XH-6Pin 2.54mm 1.0 CN4
85 1150035 Conn Wafer
XH-6Pin 2.0mm 1.0 CN7
86 1150037 Conn Wafer
XH-4Pin 2.0mm 1.0 CN6
87 1150042 Conn Wafer
XH-11Pin 2.0mm 1.0 CN3
88 1150043 Conn Wafer
XH-9Pin 2.54mm 1.0 CN1
89 1150105 Conn Wafer
optical TX179AFT 1.0 CP4
90 1150106 Conn Wafer
4pin AV4-8.4-13D 1.0 CP3
91 1150115 Conn Wafer
S - v i o d e ( w i t h f i x e d 1.0 CP1
hole)DSW-007
92 1150186 Conn Wafer FPC upright /-24Pin 0.5mm with 1.0 CN5
iron cover

57

Sm(DAEWOO_DG-K51X)051229.indd 57 2005-12-30 11:48:01

 PARTSLIST
POWER PCB Assy Material List
Code: 5750046
NO Part Code Part Name SPEC QTY Location
1 0000005 R Carbon Film 1/6W 10K 5% 1.0 RA8 near ZD2
2 0000121 R Carbon Film 1/8W 1K 5% 1.0 RB9
3 0000192 R Carbon Film 1/8W 470E 5% 1.0 RB8
4 0000196 R Carbon Film 1/4W 430K 5% 2.0 RA2,RA3
5 0000197 R Carbon Film 1/4W 15E 5% 2.0 RA4,RA5
6 0000199 R Carbon Film 1/8W 5.1K 5% 2.0 RB11,RB12
7 0000202 R Carbon Film 1W 1E 5% 1.0 RA6
8 0000203 R Carbon Film 1W 68K 5% 1.0 RA1
9 0110015 C Cera AC 275V 0.1UF20% X2(DAIN) 2.0 CA1,CA10
10 0110025 C Cera AC 400VAC 470pF10% Y1(JEC) 3.0 CY1,CY2,CY3
11 0150015 C Cera 223 50V 10% 1.0 CA8
12 0150017 C Cera 1KV2200PF 10% Y5P 1.0 CA4
13 0151009 C Cera 104 50V 20% 2.0 CB12,CA9
14 0190026 C Electro 10V 220UF 20% 1.0 CB6
15 0190039 C Electro 25V 22UF 20% D5 1.0 CA7
16 0190041 C Electro 25V 220UF 20% D8 1.0 CB9
17 0190045 C Electro 25V 47UF 20% D6 3.0 CB4,CB10,CA5
18 0190077 C Electro 10V 1000UF 20% D8 1.0 CB5
19 0190120 C Electro 10V 100UF 20% D6 2.0 CB7,CB8
20 0190125 C Electro 400V 22UF 20% D16x22 1.0 CA3
21 0190129 C Electro 25V 100UF 20% D8 1.0 CB3
22 0190159 C Electro 50V 1UF 20% D5 1.0 CA6
23 0250006 Coil RH3.5*4.7*0.8 1.0 LA2
24 0250108 Coil UT-20 25mH 1.0 LA1
25 0251013 Coil 10UH 0.5A 10% D5 1.0 LB1
26 0251014 Coil 10uH 3A 10% D8 1.0 LB2
27 0300024 Transformer PINF001-L horizontal EEL19 1.0 T1
28 0320005 Diode 1N4007 4.0 DA1~DA4
29 0320026 Diode RL201 2A50V 2.0 DB7,DB8
30 0330013 Zener Diode 4.3V 1/2W DO-35 1.0 RA9
31 0330023 Zener Diode 12V 1/2W DO-35 1.0 ZDA3
32 0330027 Zener Diode 18V 1/2W D0-35 1.0 ZDA1
33 0380019 Diode Schottky 1N5822 F17mm 1.0 DB3
34 0380022 Diode Schottky FR105 1A600V 4.0 DB4,DA5,DA6,DB2
35 0510044 IC TL431ACZ-AP 2.5V line2.54mm no lead 1.0 U3
36 0510475 IC ICE2A0565A 1.0 U1
37 0510715 IC ICE2B0565A 1.0 U1
38 0640008 IC Photo Coupler K1010C (817)COSMO 1.0 U2
39 1000462 PCB PINF001 REV:B1.3 power pcb 2005-10-22 1.0
40 1150043 Conn Wafer XH-9Pin 2.54mm 1.0 CN4
41 1150221 Conn Wafer XH-2Pin 3.96mm(HX-5273) 1.0 CN1
42 1260006 Jmper pin distance 10mm 3.0 JP2,JP3,CN2
43 1260007 Jmper pin distance 12mm 2.0 JP1,RB5
44 1260011 Jmper pin distance 15mm 1.0 DB6
45 1450006 Fuse 1A 250V UL 1.0 F1
46 1460002 Fuse Jack metal fuse Jack 2.0 F1
47 3670001 Cushion iron cushion 3.2 1.0 CT

58

Sm(DAEWOO_DG-K51X)051229.indd 58 2005-12-30 11:48:02

 PARTSLIST
Front Panel Assy Material List
Code: 5780248(DG-K512)
No Part Code Part Name SPEC QTY Location
1 1290024 Lead 18#single line 80mm 1.0
2 2000287 F/Panel GVG-2 (silver )new 1.0
3 2100236 Knob GVG-2 power knob 1.0
4 2100237 Knob GVG-2 play knob 1.0
5 2200034 Knob 8500 potentiometer knob(silver) 2.0
6 3500010 Screw BB3*6 3.0 function knob
7 3500081 Screw BTPW3*8(meson dia 9.0mm) 2.0 Mic pcb
8 3500084 Screw BB3*8 5 12.0 control pcb8,panel housing4
9 3900114 Metal Base GVG-3 panel housing 1.0
10 5710066 MIC PCB Assy GV-DMAGVG-2-01 1.0
11 5730130 Control PCB Assy GV-DCAGVG-2-LED-01 (NO STANDBY) 1.0

Code: 5780249(DG-K514)
No Part Code Part Name SPEC QTY Location
1 1290024 Lead 18#single line 80mm 1.0
2 2000288 F/Panel GVG-4 (silver)new 1.0
3 2100238 Knob GVG-4 play knob 1.0
4 2100239 Knob GVG-4 power knob 1.0
5 2200034 Knob 8500potentiometer knob (silver) 2.0
6 3500010 Screw BB3*6 3.0 play knob
7 3500081 Screw BTPW3*8(meson dia 9.0mm) 2.0 MicPCB
8 3500084 Screw BB3*8 5 12.0 Control pcb 8 panel housing 4
9 3900114 Metal Base GVG-3 panel hosing 1.0
10 5710066 MIC PCB Assy GV-DMAGVG-2-01 1.0
11 5730131 Control PCB Assy GV-DCAGVG-4-LED-01 (NO STANDBY) 1.0

Code: 5780250(DG-K514)
No Part Code Part Name SPEC QTY Location
1 1290024 Lead 18#single line 80mm 1.0
2 2000289 F/Panel GVG-5 (silver )new 1.0
3 2100240 Knob GVG-5 power knob 1.0
4 2100241 Knob GVG-5 open/close play 1.0
5 2100242 Knob GVG-5 play knob 1.0
6 2200042 Knob 3816potentiometer knob(silver) 2.0
7 3500084 Screw BB3*8 5 11.0 Control pcb 7 panel housing 4
8 3500089 Screw BB2.0*4 2.0 function knob
9 3500094 Screw BTPW3*7(meson dia 9.0mm) 2.0 MicPCB
10 3900114 Metal Base GVG-3 panel housing 1.0
11 5710067 MIC PCB Assy GV-DMAGVG-5-01 1.0
12 5730132 Control PCB Assy GV-DCAGVG-5-LED-01 (NO STANDBY) 1.0

59

Sm(DAEWOO_DG-K51X)051229.indd 59 2005-12-30 11:48:02

 PARTSLIST
Code: 5780278(DG-K518)
No Part Code Part Name SPEC QTY Location
1 1290024 Lead 18#single line 80mm 1.0
2 2000296 F/Panel GVG-8(silver ) 1.0
3 2100256 Knob GVG-8 power knob 1.0
4 2100257 Knob GVG-8 function knob 1.0
5 2120023 Indicator Light Cap GVG-8 LED 1.0
6 3500084 Screw BB3*8 5 14.0 control pcb 10,housing 4
7 3900114 Metal Base GVG-3 panel housing 1.0 control pcb 10,housing 4
8 5730147 Control PCB Assy GV-DCAGVG-8-LED-01 (NO STANDBY) 1.0

60

Sm(DAEWOO_DG-K51X)051229.indd 60 2005-12-30 11:48:03

 PARTSLIST
Control PCB Assy Material List
Code: 5730130(DG-K512)
No Part Code Part Name SPEC QTY Location
1 0000005 R Carbon Film 1/6W 10K 5% 5.0 R1,R3,R4,R5,R6
2 0000019 R Carbon Film 1/6W 51K 5% 1.0 R2
3 0000142 R Carbon Film 1/6W 100E 5% 1.0 R7
4 0150007 C Cera 101 50V 10% 3.0 C3,C4,C5
5 0152001 C Cera 104 50V -20%+80% F5 D6 1.0 C1
6 0190030 C Electro 16V 100UF 20% D5 2.0 EC1,C2
7 0340001 LBD dia 3mm 1.0 LED1
8 0510586 IC V6928 1.0 U1
9 0711005 LED LED MR-6659 1.0 U2
10 0800001 Switch 6*6*5 1.0 SW1
11 0800022 Switch KFC6*6*6 horizontal 5.0 SW2~SW6
12 1000370 PCB CGVG016 REV: B2.4 control pcb 1.0
13 1100002 Ferrite Core outside22.5mm,inside 13.8mm,high 6.4mm 1.0
14 1260003 Jumper pin distance 6mm 1.0 JMP2
15 1260005 Jumper pin distance 8mm 1.0 Jmp3
16 1260006 Jumper pin distacne10mm 1.0 Jmp1
17 1260020 Jumper pin distance 4mm 1.0 JMP4
18 1290025 Lead 18# single line 12mm 1.0 weld
19 1310445 Conn Wire 2.54 single 6P*550mm,red white conn wire across 1.0 from control pcb to mpeg pcb
20 1500003 Receiver PIC-317LM 1.0 IR
21 5440103 Cushion 8x7x10mm(double has sticker)ridigity 64 1.0 IR
22 5440112 Cushion 45x4x11mm(double has sticker )EVI rigidity 64 1.0 LED

Code: 5730131(DG-K514)
NO Part Code Part Name SPEC QTY Location
1 0000005 R Carbon Film 1/6W 10K 5% 5.0 R1,R3,R4,R5,R7
2 0000019 R Carbon Film 1/6W 51K 5% 1.0 R6
3 0000142 R Carbon Film 1/6W 100E 5% 1.0 R2
4 0150007 C Cera 101 50V 10% 3.0 C4,C5,C6
5 0152001 C Cera 104 50V -20%+80% F5 D6 1.0 C2
6 0190030 C Electro 16V 100UF 20% D5 2.0 C1,C3
7 0340001 LBD dia 3mm 1.0 LED1
8 0510586 IC V6928 1.0 U1
9 0711005 LED LED MR-6659 1.0 U2
10 0800001 Switch 6*6*5 1.0 SW6
11 0800022 Switch KFC6*6*6 horizontal 5.0 SW1~SW5
12 1000362 PCB CGVG017 REV: B2.5 control pcb 2005-4-12 1.0
13 1100002 Ferrite Core outside22.5mm,inside13.8mm,high6.4mm 1.0
14 1260005 Jumper pin distance 8mm 1.0 JMP3
15 1260006 Jumper pin distance 10mm 2.0 JMP2,JMP4
16 1260025 Jumper pin distance 6.5mm 3.0 JMP1,JMP5
17 1310443 Conn Wire 2.54 single 6P*550mm,red whie conn wire 1,2~3across 1.0 from control pcb to MPEG pcb
18 1500003 Receiver PIC-317LM 1.0 IR
19 5440103 Cushion 8x7x10mm(double has sticker)rigidity64 1.0 IR
20 5440112 Cushion 45x4x11mm(double has sticker )EVI rigidity 64 1.0 LED

61

Sm(DAEWOO_DG-K51X)051229.indd 61 2005-12-30 11:48:04

 PARTSLIST
Code: 5730132(DG-K515)
No Part Code Part Name SPEC QTY Location
1 0000005 R Carbon Film 1/6W 10K 5% 5.0 R3,R4,R5,R6,R1
2 0000019 R Carbon Film 1/6W 51K 5% 1.0 R2
3 0000142 R Carbon Film 1/6W 100E 5% 1.0 R7
4 0150007 C Cera 101 50V 10% 3.0 C3,C4,C5
5 0152001 C Cera 104 50V -20%+80% F5 D6 1.0 C1
6 0190030 C Electro 16V 100UF 20% D5 1.0 EC1
7 0190103 C Electro 16V 100UF 20% D6*5 1.0 C2
8 0340001 LED dia 3mm 1.0 LED1
9 0510586 IC V6928 1.0 U1
10 0711005 LED LED MR-6659 1.0 U2
11 0800001 Switch 6*6*5 6.0 SW1~SW6
12 1000337 PCB CGVG018 REV:B2.3 control pcb 1.0
13 1100002 Ferrite Core outside 22.5mm,inside 13.8mm,high 6.4mm 1.0
14 1260003 Jumper pin distance 6mm 1.0 JMP3
15 1260004 Jumper pin distance 7mm 3.0 JMP2,4,5
16 1260018 Jumper pin distance 9mm 3.0 JMP1,JMP8,JMP6
17 1260020 Jumper pin distance 4mm 1.0 JMP7
18 1310444 Conn Wire 2.54single line 6P*550mm,red white conn wire 1,2~3 5~6across 1.0 from control pcb to mpeg pcb
19 1500003 Receiver PIC-317LM 1.0 IR
20 5440106 Cushion 8x7x8mm (double has sticker)rigidity 64 1.0 IR
21 5440113 Cushion 45x4x7mm(double has sticker) EVIrigidity 64 1.0 LED

Code: 5730147(DG-K518)
No Part Code Part Name SPEC QTY Location
1 0000005 R Carbon Film 1/6W 10K 5% 6.0 R1,R3,R4,R5,R6,R8
2 0000019 R Carbon Film 1/6W 51K 5% 1.0 R2
3 0000142 R Carbon Film 1/6W 100E 5% 1.0 R7
4 0150007 C Cera 101 50V 10% 3.0 C4,C5,C3
5 0152001 C Cera 104 50V -20%+80% F5 D6 1.0 C1
6 0190030 C Electro 16V 100UF 20% D5 1.0 C2
7 0190103 C Electro 16V 100UF 20% D6*5 1.0 EC1
8 0340001 LED dia 3mm 1.0 LED1
9 0510586 IC V6928 1.0 U1
10 0711005 LED LED MR-6659 1.0 U2
11 0800001 Switch 6*6*5 7.0 SW1~7
12 1000410 PCB CGVG030 REV:B2.2 2005-07-28 control pcb 1.0
13 1100002 Ferrite Core outside 22.5mm inside 13.8mm high 6.4mm 1.0
14 1260002 Jumper pin distance 5mm 2.0 JMP6,JMP5
15 1260003 Jumper pin distance 6mm 2.0 JMP1,JMP4
16 1260026 Jumper pin distance 7.5mm 2.0 JMP2,JMP3
17 1290025 Lead 18# single line 12mm 1.0 IC28 connect with ground
18 1310469 Conn Wire 2.54single line 6P*280mm,red white conn wire 2~3 across 1.0
19 1500003 Receiver PIC-317LM 1.0 IR
20 5440106 Cushion 8x7x8mm(double has sticker)rigidity 64 1.0 IR
21 5440120 Cushion 40x4x8mm(double has sticker)EVIrigidity 64 1.0 LED

62

Sm(DAEWOO_DG-K51X)051229.indd 62 2005-12-30 11:48:05

 PARTSLIST
MIC PCB Assy Material List
Code: 5710066 (DG-K512 and DG-K514)
No Part Code Part Name SPEC QTY Location
1 0000002 R Carbon Film 1/6W 1K 5% 3.0 R18,R21,R26
2 0000004 R Carbon Film 1/6W 4.7K 5% 1.0 R2
3 0000005 R Carbon Film 1/6W 10K 5% 5.0 R7,R10,R29,R23,R5
4 0000013 R Carbon Film 1/6W 1.5K 5% 1.0 R3
5 0000015 R Carbon Film 1/6W 15K 5% 1.0 R17
6 0000017 R Carbon Film 1/6W 22K 5% 2.0 R11,R12
7 0000018 R Carbon Film 1/6W 47K 5% 2.0 R1,R24
8 0000020 R Carbon Film 1/6W 100K 5% 4.0 R16,R20,R25,R27
9 0000061 R Carbon Film 1/6W 33E 5% 1.0 R9
10 0000062 R Carbon Film 1/6W 6.8K 5% 2.0 R4,R8
11 0000112 R Carbon Film 1/6W 2.7K 5% 1.0 R6
12 0100007 Potentiometer RD902N-BA1-B20K 3pin 1.0 VR2
13 0100011 Potentiometer R0903NE-F20-C20K 3pin 1.0 VR1
14 0150001 C Cera 563 50V 10% 2.0 C8,C9
15 0150007 C Cera 101 50V 10% 4.0 C19,C24,C25,C27
16 0150008 C Cera 104 50V 10% 5 4.0 C4,C5,C10,C23
17 0150013 C Cera 103 50V 10% 3.0 C14,C28,C29
18 0150014 C Cera 222 50V 10% 2.0 C6,C7
19 0150015 C Cera 223 50V 10% 2.0 C12,C13
20 0190008 C Electro 50V 4.7UF 20% D5 2.0 C30,C20
21 0190012 C Electro 50V 10UF 20% 1.0 C17
22 0190031 C Electro 50V 3.3UF 20% 3.0 C15,C21,C26
23 0190039 C Electro 25V 22UF 20% D5 3.0 C3,C1,C18
24 0190041 C Electro 25V 220UF 20% D8 1.0 C11
25 0190103 C Electro 16V 100UF 20% D6*5 2.0 C2,C22
26 0250006 Coil RH3.5*4.7*0.8 2.0 L1,L2
27 0330001 Zener Diode 5.6V 1/2W DO-35 1.0 D1
28 0450013 TR C1815 =70~700 1.0 Q1
29 0510058 IC TP5299P 1.0 U1
30 0510129 IC F4558N (DIP) 1.0 U2
31 1000296 PCB KGVG004 REV:B2.0 mic pcb 2004.11.16 1.0
32 1100003 Ferrite Core outside 16mm inside 12mm high 8mm 1.0
33 1150166 Conn Wafer silver 7pin mic jack (short pin ) 2.0 MIC1,MIC2
34 1260002 Jumper pin distance 5mm 2.0 JMP1,JMP2
35 1260003 Jumper pin distance 6mm 1.0 JMP4
36 1260020 Jumper pin distance 4mm 1.0 JMP3
37 1310086 Conn Wire 2.54 double 4P/3P*350mm 1.0 CN1

63

Sm(DAEWOO_DG-K51X)051229.indd 63 2005-12-30 11:48:06

 PARTSLIST
Code: 5710067 (DG-K518)
No Part Code Part Name SPEC QTY Location
1 0000002 R Carbon Film 1/6W 1K 5% 3.0 R18,R21,R26
2 0000004 R Carbon Film 1/6W 4.7K 5% 1.0 R2
3 0000005 R Carbon Film 1/6W 10K 5% 5.0 R5,R7,R10,R23,R29
4 0000013 R Carbon Film 1/6W 1.5K 5% 1.0 R3
5 0000015 R Carbon Film 1/6W 15K 5% 1.0 R17
6 0000017 R Carbon Film 1/6W 22K 5% 2.0 R11,R12
7 0000018 R Carbon Film 1/6W 47K 5% 2.0 R1,R24
8 0000020 R Carbon Film 1/6W 100K 5% 4.0 R16,R20,R25,R27
9 0000061 R Carbon Film 1/6W 33E 5% 1.0 R9
10 0000062 R Carbon Film 1/6W 6.8K 5% 2.0 R4,R8
11 0000112 R Carbon Film 1/6W 2.7K 5% 1.0 R6
12 0100007 Potentiometer RD902N-BA1-B20K 3pin 1.0 VR2
13 0100011 Potentiometer R0903NE-F20-C20K 3pin 1.0 VR1
14 0150001 C Cera 563 50V 10% 2.0 C8,C9
15 0150007 C Cera 101 50V 10% 4.0 C19,C24,C25,C27
16 0150008 C Cera 104 50V 10% 5 6.0 C4,C5,C10,C23,C28,C29
17 0150013 C Cera 103 50V 10% 1.0 C14
18 0150014 C Cera 222 50V 10% 2.0 C6,C7
19 0150015 C Cera 223 50V 10% 2.0 C12,C13
20 0190008 C Electro 50V 4.7UF 20% D5 2.0 C30,C20
21 0190012 C Electro 50V 10UF 20% 1.0 C17
22 0190031 C Electro 50V 3.3UF 20% 3.0 C21,C26,C15
23 0190039 C Electro 25V 22UF 20% D5 3.0 C3,C1,C18
24 0190041 C Electro 25V 220UF 20% D8 1.0 C11
25 0190103 C Electro 16V 100UF 20% D6*5 2.0 C2,C22
26 0250006 Coil RH3.5*4.7*0.8 2.0 L1,L2
27 0330001 Zener Diode 5.6V 1/2W DO-35 1.0 D1
28 0450013 TR C1815 =70~700 1.0 Q1
29 0510058 IC TP5299P 1.0 U1
30 0510129 IC F4558N (DIP) 1.0 U2
31 1000305 PCB KGVG005 REV:B1.1 mic PCB 2004.11.19 1.0
32 1100003 Ferrite Core outside 16mm inside 12mm high 8mm 1.0
33 1150166 Conn Wafer silver 7pin mic jack (short pin ) 2.0 MIC1,MIC2
34 1260002 Jumper pin distance 5mm 3.0 JMP1,JMP2,JMP4
35 1260020 Jumper pin distance 4mm 1.0 JMP3
36 1310086 Conn Wire 2.54 double 4P/3P*350mm 1.0 CN1

64

Sm(DAEWOO_DG-K51X)051229.indd 64 2005-12-30 11:48:07