Scribd
Upload
29 views1 page

Design of Stem

This document provides design details for the stem of a structure. Key parameters include a height of 4.75m, horizontal pressure of 67.69 kN/m, and a maximum bending moment of 107.2 kNm. Reinforcement requirements are calculated as 1180 mm^2 of area with #12 bars spaced at 90 mm centers for a development length of 564 mm.

Uploaded by

asluznet
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
29 views1 page

Design of Stem

This document provides design details for the stem of a structure. Key parameters include a height of 4.75m, horizontal pressure of 67.69 kN/m, and a maximum bending moment of 107.2 kNm. Reinforcement requirements are calculated as 1180 mm^2 of area with #12 bars spaced at 90 mm centers for a development length of 564 mm.

Uploaded by

asluznet
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 1

Design of stem

h = 4.75 m
Horizontal pressure, Ph = 0.5 x K a x g x h 2
Ph per m = 67.69 kN
Maximum B.M = 107.2 kNm
Factored moment = 160.8 kNm
Cover = 50 mm
d = 400 mm
2
Mu/bd = 1.005
pt = 0.295 %
Ast = 1180 mm2
Spacing of 12 mm dia = 95.85 mm
Minimum spacing = 300 or 3d
Provide 12 mm dia @ 90 mm c/c
Development length = 47f = 564 mm

You might also like